多孔钽髋臼组件在复杂翻修全髋关节置换术中的应用:骨缺损严重程度与术中固定方式的影响
本研究回顾2003至2024年316例患者(345髋)接受多孔钽髋臼组件翻修全髋关节置换术,中位随访6.5年。结果显示无菌性松动再翻修率2年0.87%、5年1.84%、10年2.72%,Paprosky分级与再翻修风险无关,第三次及以上翻修和未实现三点固定是独立危险因素。
要点
- 多孔钽髋臼组件在各Paprosky分级中无菌性松动再翻修率均较低。
- 第三次及以上翻修术与再翻修风险增加独立相关(sHR 2.69,P=0.03)。
- 仅三点固定与再翻修风险降低独立相关(sHR 0.37,P=0.04)。
核心结论
- 多孔钽髋臼组件在翻修全髋关节置换术后2至10年再翻修结局良好,各骨缺损分级无菌性松动率均低。
- 既往翻修次数多和未能实现三点固定与再翻修风险增加独立相关。
研究设计与样本
- 回顾性队列研究,纳入2003至2024年316例患者(345髋)接受多孔钽髋臼组件翻修全髋关节置换术。
- 女性212髋(61.4%),手术平均年龄71岁(范围26至95岁),平均随访6.5年(范围0至21.9年)。
- 主要终点为无菌性松动导致的髋臼再翻修,次要终点为任何原因髋臼再翻修。
主要发现
- 无菌性松动再翻修累积发生率2年0.87%、5年1.84%、10年2.72%。
- 任何原因再翻修累积发生率2年5.52%、5年7.40%、10年9.23%。
- Paprosky分级与再翻修风险无关。
- 第三次及以上翻修与失败风险增加相关(sHR 2.69,P=0.03)。
- 三点固定与再翻修风险降低独立相关(sHR 0.37,P=0.04),压配固定校正后无独立关联。
关键数值与推荐
- Paprosky分级分布:2A 36髋、2B 68髋、2C 82髋、3A 105髋、3B 54髋;82髋(23.8%)存在骨盆不连续。
- 单变量分析中压配和/或三点固定与再翻修风险降低相关,但仅三点固定在校正后保持独立关联。
临床怎么用
- 对于复杂翻修全髋关节置换术,多孔钽髋臼组件可考虑用于各Paprosky分级骨缺损。
- 术中应争取实现三点固定以降低再翻修风险。
- 既往翻修次数多的患者再翻修风险较高,需加强术后监测。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Porous tantalum acetabular components are widely used in revision total hip arthroplasty (rTHA) to manage acetabular bone loss. Re-revision risk according to defect severity and intraoperative fixation is poorly characterized. METHODS: Between 2003 and 2024, 316 patients (345 hips) underwent rTHA surgery, who were treated with a porous tantalum acetabular component. Of these hips, 212 (61.4%) were in women. Mean age at surgery was 71 years (range, 26 to 95), and mean follow-up was 6.5 years (range, zero to 21.9). The primary endpoint was acetabular re-revision for aseptic loosening; the secondary endpoint was all-cause acetabular re-revision. Cumulative incidence functions estimated risk at two, five, and 10 years; associations were assessed using subdistribution hazard ratios (sHR). Analyses were stratified by Paprosky defect, pelvic discontinuity (PD), and intraoperative fixation (press-fit and/or three-point). Paprosky grades were 2A (n = 36), 2B (n = 68), 2C (n = 82), 3A (n = 105), and 3B (n = 54); 82 hips had PD (23.8%). RESULTS: Cumulative incidence of re-revision for aseptic loosening was 0.87, 1.84, and 2.72% at two, five, and 10 years, respectively; corresponding all-cause re-revision estimates were 5.52, 7.40, and 9.23%. Paprosky grade was not associated with re-revision risk. Undergoing a third or greater rTHA was associated with increased failure risk (sHR 2.69, P = 0.03). Press-fit and/or three-point fixation were associated with reduced re-revision risk in univariable analysis; however, only three-point fixation remained independently associated with reduced re-revision risk (sHR 0.37, P = 0.04), whereas press-fit fixation was not independently associated with re-revision after adjustment. CONCLUSION: Porous tantalum acetabular components achieve excellent re-revision outcomes from two to 10 years after rTHA, with low rates of aseptic loosening across all defect grades. Greater prior revision burden and failure to achieve three-point fixation were independently associated with increased re-revision risk.
引用
- D'Apollonio TM, Oteman BPH, Hopman MLT, et al. Porous Tantalum Acetabular Components in Complex Revision Total Hip Arthroplasty: The Influence of Defect Severity and Intraoperative Fixation. J Arthroplasty. 2026. PMID: 42918277. doi:10.1016/j.arth.2026.10.013
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。