文献速递关节外科

勿追求对称间隙:固定畸形全膝关节置换中保留原生不对称与更好恢复相关

Do Not Chase Symmetric Gaps: Native Asymmetry Linked to Better Recovery in Fixed-Deformity Total Knee Arthroplasty.
PubMed 文献 · J Arthroplasty · 2026-09-28

本研究回顾861例机器人辅助初次全膝关节置换,按术中应力试验分为可矫正(634例)与不可矫正(227例)两组。在不可矫正膝中,保留原生内外侧松弛不对称、减少骨切除与术后一年患者报告功能改善更好相关,提示固定畸形中应优先保留骨量而非追求对称间隙。

要点

  • 不可矫正膝保留原生内外侧松弛不对称与一年功能改善更好相关。
  • 不可矫正膝中骨切除量越少,一年KOOS JR改善越大。
  • 固定畸形中追求对称间隙可能导致过度切除并影响恢复。

核心结论

  • 在不可矫正膝的机器人辅助全膝关节置换中,保留原生内外侧松弛不对称与更优的患者报告功能恢复相关。
  • 该发现挑战了普遍追求对称间隙的目标,支持在固定畸形中优先保留骨量的适应性策略。

研究设计与样本

  • 单中心回顾性研究,纳入861例连续机器人辅助初次全膝关节置换,其中可矫正634例、不可矫正227例。
  • 术中通过伸直位内翻-外翻应力评估可矫正性:对齐在距中立3°以内为可矫正,大于3°为不可矫正。
  • 机器人系统量化近伸直(5至20°)与屈曲(90±10°)间室松弛度并记录计划切除深度。
  • 术后内外侧松弛差值分为对称(小于0.5 mm)、部分矫正(0.5至2 mm)、保留原生不对称(2至5 mm)。
  • 收集术前及术后六周、三个月、一年的KOOS JR与PROMIS Physical Function,并按可矫正性分层。

主要发现

  • 不可矫正膝在三个月(P = 0.003)和一年(7.0 ± 7.8 对比 4.9 ± 6.8;P = 0.036)的PROMIS Physical Function改善更大,尽管术前评分相似。
  • 不可矫正膝中,较低总骨切除体积与一年KOOS JR改善更大相关(P = 0.016),在外侧屈曲间室最强(P = 0.039)。
  • 术后屈曲内外侧松弛差值更大与KOOS JR(P = 0.009)和PROMIS(P = 0.044)改善更大相关。

关键数值与推荐

  • 可矫正性判定:伸直位应力下对齐距中立3°以内为可矫正,大于3°为不可矫正。
  • 术后内外侧松弛差值分类:对称小于0.5 mm,部分矫正0.5至2 mm,保留原生不对称2至5 mm。

临床怎么用

  • 在固定畸形全膝关节置换中,可考虑保留原生内外侧松弛不对称而非追求对称间隙。
  • 优先减少骨切除量,避免为达到对称间隙而过度切除。

局限性

  • 单中心回顾性研究,结果可能受机构技术与患者选择影响。
  • 可矫正性判定与松弛度测量依赖术中应力评估和机器人系统量化。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Non-correctable (fixed) knee deformities in total knee arthroplasty (TKA) are technically demanding, and the intraoperative factors driving recovery in this subgroup remain unclear. We hypothesized that, in non-correctable knees, a strategy that minimizes bone resection and preserves the patient's native medio-lateral laxity asymmetry, rather than chasing symmetric gaps through additional bone removal, would be associated with superior patient-reported functional outcomes at one year, whereas no such association would be observed in correctable knees. METHODS: We reviewed 861 consecutive primary robotic-arm-assisted TKAs (634 correctable, 227 non-correctable) at a single academic institution. Correctability was assessed intraoperatively by varus-valgus stress in extension: correctable if alignment came within 3° of neutral, non-correctable if it remained greater than 3° from neutral1-3. The robotic system quantified native and reconstructed compartment laxity in near extension (5 to 20°) and flexion (90 ± 10°) and recorded planned resection depths. Postoperative medial-lateral (M-L) laxity differential (reconstructed medial - lateral) was categorized as symmetric (less than 0.5 mm), partially corrected (0.5 to two mm), or preserved native asymmetry (two to five mm). The Knee injury and Osteoarthritis Outcome Score for Joint Replacement (KOOS JR) and PROMIS (Patient-Reported Outcomes Measurement Information System) Physical Function were collected preoperatively and at six weeks, three months, and one year, stratified by correctability. RESULTS: The non-correctable knees showed greater PROMIS Physical Function improvement at three months (P = 0.003) and one year (7.0 ± 7.8 versus 4.9 ± 6.8; P = 0.036) despite similar preoperative scores. Among non-correctable knees, lower total bone resection volume was associated with greater KOOS JR improvement at one year (P = 0.016), strongest in the lateral flexion compartment (P = 0.039), indicating over-resection beyond implant thickness to achieve symmetric gaps is linked to poorer recovery. Greater postoperative flexion M-L laxity differential was also associated with greater KOOS JR (P = 0.009) and PROMIS (P = 0.044) improvement. CONCLUSIONS: In non-correctable knees undergoing robotic-assisted TKA, preservation of native M-L laxity asymmetry is associated with superior patient-reported functional recovery. These findings challenge the universal goal of symmetric gaps and support an adaptive strategy that prioritizes bone preservation in fixed deformities.

来源:J Arthroplasty,查看原文。版权归原作者所有。

引用

  1. Suhardi VJ, Gwam C, DiGangi C, et al. Do Not Chase Symmetric Gaps: Native Asymmetry Linked to Better Recovery in Fixed-Deformity Total Knee Arthroplasty. J Arthroplasty. 2026. PMID: 42805272. doi:10.1016/j.arth.2026.09.011

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。