文献速递关节外科

全髋关节置换术后髋臼假体前倾角的影像学评估:技术与局限

Assessment of Acetabular Component Anteversion Following Total Hip Arthroplasty: Current Imaging Techniques and Limitations.
PubMed 文献 · J Arthroplasty · 2026-09-21

本文通过叙述性综述评估全髋关节置换术后髋臼假体前倾角和倾斜角的常用X线与CT测量技术,强调测量精度、可重复性及骨盆位置和脊柱-骨盆力学的影响。结论认为X线最常用,但全骨盆CT在异常脊柱-骨盆力学或假体位置不良时可能提供更准确可重复的评估。

要点

  • X线是评估髋臼假体位置最广泛可用的方法,但前倾角测量仍具挑战。
  • 全骨盆CT在异常脊柱-骨盆力学或假体位置不良时可能更准确可重复。
  • 单侧髋CT不足以建立骨盆参考平面,需全骨盆成像。

核心结论

  • 全髋关节置换术后髋臼假体位置可用多种影像技术评估,理解每种方法的优缺点对评估疼痛、不稳或机械失败至关重要。

研究设计与样本

  • 叙述性文献综述,评估全髋关节置换术后常用X线和CT评估髋臼假体前倾角与倾斜角的技术。

主要发现

  • Woo和Morrey、Lewinnek、Liaw及Widmer X线技术常用,但关于哪种X线技术更优信息矛盾。
  • 一些研究显示X线与CT评估之间具有合理相关性。
  • 异常脊柱-骨盆力学或假体位置不良患者,CT检查可能提供更高准确性和可重复性。
  • 单侧髋CT不足以建立准确确定前倾角或倾斜角所需的骨盆参考平面。

关键数值与推荐

  • 全骨盆CT使用合适骨盆参考框架时可能提供最可重复的假体方向评估。

临床怎么用

  • 评估疼痛、不稳或机械失败的全髋关节置换术后患者时,应理解X线和CT各自的优势与局限。
  • 对异常脊柱-骨盆力学或怀疑假体位置不良者,考虑全骨盆CT评估。

局限性

  • 本文为叙述性综述,未报告系统检索范围、样本量或定量合并结果。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Accurate measurement of acetabular component position is crucial for evaluating instability, impingement, accelerated wear, pain, and component failure after total hip arthroplasty (THA). Acetabular anteversion remains difficult to accurately determine, even though inclination is readily evaluated on radiographs. Numerous radiographic and computed tomography (CT)-based techniques have been described, each with distinct advantages and limitations. METHODS: The commonly used radiographic and CT-based techniques for assessing acetabular component anteversion and inclination after THA were evaluated by a narrative review of the literature. Measurement technique, precision, repeatability, technological constraints, and the impact of the pelvic position and spino-pelvic mechanics were emphasized. RESULTS: The Woo and Morrey, Lewinnek, Liaw, and Widmer radiographic techniques are frequently used. While there is conflicting information regarding the superiority of any one of these radiographic techniques, some studies have shown reasonable correlation between radiographic and CT-based assessments. In patients who have abnormal spino-pelvic mechanics or component malposition, CT-based examination may offer more accuracy and reproducibility. However, as unilateral hip CT scans do not sufficiently establish the pelvic reference plane required for accurate determination of version or inclination, proper CT assessment necessitates imaging of the complete pelvis. CONCLUSIONS: After THA, acetabular component position can be evaluated using a variety of imaging techniques. While radiographs remain the most widely available modality, CT may provide the most reproducible assessment of component orientation when whole-pelvis imaging is obtained using an appropriate pelvic reference frame. Understanding the strengths and limitations of each approach is essential when evaluating painful, unstable, or mechanically failing THA.

来源:J Arthroplasty,查看原文。版权归原作者所有。

引用

  1. Edelstein A, Smitterberg CW, Amanatullah DF, et al. Assessment of Acetabular Component Anteversion Following Total Hip Arthroplasty: Current Imaging Techniques and Limitations. J Arthroplasty. 2026. PMID: 42767533. doi:10.1016/j.arth.2026.09.026

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。