3D打印高孔隙率髋臼杯与HA涂层非高孔隙率杯在THA中的临床与影像学比较
本研究回顾性比较了CT导航全髋关节置换术中使用3D打印高孔隙率髋臼杯与羟基磷灰石涂层非高孔隙率杯的临床与影像学结果,经倾向性评分匹配后每组66髋。2年随访时两组临床评分与杯位置误差无显著差异,高孔隙率组初始间隙发生率显著更高但随访中逐渐减少。
要点
- 匹配后两组2年临床评分与杯位置误差无显著差异
- 高孔隙率组初始间隙发生率27.3%显著高于对照组12.1%(P=0.027)
- 两组均无迁移或松动,放射性透亮线2年内均逐渐减少
核心结论
- 3D打印高孔隙率杯与HA涂层非高孔隙率杯在2年临床与影像学结果上相当,高孔隙率杯初始间隙虽更多但可逐渐消退,影像学结果良好。
研究设计与样本
- 回顾性研究,纳入196髋(175例),高孔隙率组112髋、HA涂层组84髋,均使用CT导航系统行THA。
- 按年龄、性别、诊断和手术入路进行倾向性评分匹配后每组各66髋。
- 临床结局采用日本骨科协会髋关节评分和JOA髋关节疾病评估问卷,术前及术后6、12、24个月评估。
- 影像学评估杯外展角、前倾角、位置、初始间隙、迁移、松动和放射性透亮线,杯位置用3D模板软件测量。
主要发现
- 两组2年临床结局无显著差异。
- 杯外展角平均绝对误差2.9±2.3°对2.6±2.2°,前倾角2.7±2.0°对2.7±2.0°,均无显著差异。
- 研究期间两组均无迁移或松动。
- 初始间隙发生率在高孔隙率组显著更高(18/66例,27.3%对8/66例,12.1%,P=0.027)。
- 放射性透亮线在两组2年随访中均逐渐减少,2年时无显著差异。
关键数值与推荐
- 初始间隙:高孔隙率组27.3%(18/66)对HA涂层组12.1%(8/66),P=0.027。
- 杯外展角平均绝对误差:2.9±2.3°对2.6±2.2°;前倾角:2.7±2.0°对2.7±2.0°。
临床怎么用
- 在CT导航THA中,3D打印高孔隙率杯可获得与HA涂层非高孔隙率杯相当的2年临床与影像学结果。
- 高孔隙率杯初始间隙较多见,但随访中可逐渐消退,无需因此额外干预。
- 选择高孔隙率杯时应关注初始间隙并做好随访影像学评估。
局限性
- 本研究为回顾性设计,随访仅2年。
- 样本量有限,匹配后每组66髋。
- 单中心研究,结论外推需谨慎。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: The use of highly porous acetabular components in total hip arthroplasty (THA) has gained popularity. To elucidate the clinical and radiological outcomes of three-dimensional (3D)-printing highly porous cups, we compared highly porous cups and hydroxyapatite (HA)-coated non-highly porous cups in computed tomography (CT)-based navigated THA. METHODS: We retrospectively investigated 196 hips of 175 patients (the highly-porous group, 112 hips of 97 patients; the HA-porous group, 84 hips of 78 patients) who underwent THA using a computed tomography-based navigation system. After propensity score matching for age, sex, diagnosis, and surgical approach, each group comprised 66 hips. Clinical outcomes were evaluated using the Japanese Orthopaedic Association hip score and Japanese Orthopaedic Association Hip Disease Evaluation Questionnaire score preoperatively and at six, 12, and 24 months postoperatively. Radiological outcomes for cup orientation, positioning, initial gap, migration, loosening, and radiolucent lines were assessed. Cup placement was measured using 3D templating software. RESULTS: Clinical outcomes did not differ significantly between groups after two years. The mean absolute error of cup orientation did not differ significantly between the two groups (inclination: 2.9 ± 2.3° versus 2.6 ± 2.2°, respectively; anteversion: 2.7 ± 2.0° versus 2.7 ± 2.0°, respectively). There was no migration or loosening in both groups during the study period. The incidence of initial gap was significantly higher in the highly porous group than in the HA-porous group (18 of 66 cases, 27.3% versus 8 of 66 cases, 12.1%, P = 0.027). The radiolucent lines exhibited progressive decline during the 2-year follow-up in both groups, and there were no significant differences at two years. CONCLUSIONS: The 2-year clinical outcomes and radiological evaluations of the 3D highly porous and non-highly porous cups were comparable. Initial gaps in the 3D-printing highly porous cups diminished, and the highly porous cups showed excellent radiological outcomes.
引用
- Okazaki T, Imagama T, Matsuki Y, et al. Comparing Clinical and Radiological Outcomes for a Three-Dimensional Printed Highly Porous Cup and a Hydroxyapatite-Coated Non-Highly Porous Cup in Total Hip Arthroplasty Using Propensity Score Matching. J Arthroplasty. 2026. PMID: 42264105. doi:10.1016/j.arth.2026.06.011
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。