文献速递关节外科

非交叉韧带保留型全膝关节置换术中实现解剖运动学:使用蹲姿机的临床前评估

Achieving Anatomic Kinematics in a Noncruciate Total Knee Arthroplasty: Preclinical Evaluation Using a Crouching Machine.
PubMed 文献 · J Arthroplasty · 2026-03-31

本研究通过构建模拟侧副韧带、股四头肌、腘绳肌和腓肠肌的蹲姿机,对四种全膝关节置换(TKA)设计进行三维打印并在12°至130°屈伸过程中测量股骨-胫骨运动学。结果显示,髁间引导面位于内外侧股骨髁之间的replica设计能实现内侧接触点近乎恒定、外侧逐渐后移的解剖运动,而其他设计呈现近乎平行的运动。结论认为在交叉韧带切除的TKA中,髁间引导面可产生解剖运动。

要点

  • 蹲姿机模拟主要韧带和肌肉,评估四种TKA设计的运动学。
  • replica髁间设计内侧接触点恒定,外侧屈曲时逐渐后移。
  • 其他设计(内侧枢轴、内侧一致、超一致)运动近乎平行。

核心结论

  • 在交叉韧带切除的全膝关节置换术中,髁间引导面可产生解剖运动。

研究设计与样本

  • 临床前研究,构建包含侧副韧带、股四头肌、腘绳肌和腓肠肌模拟的蹲姿机。
  • 设计并三维打印内侧枢轴、内侧一致、超一致和replica髁间四种TKA,测量12°至130°屈伸时的股骨-胫骨运动学。

主要发现

  • replica髁间设计显示内侧接触点位置几乎恒定,外侧在屈曲过程中逐渐后移。
  • 其他设计显示近乎平行的运动,接触位置变化极小。

临床怎么用

  • 提示髁间引导面设计可能有助于在交叉韧带切除的TKA中恢复解剖运动学。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Studies on patients have shown that normal anatomic motion is often not achieved with current total knee arthroplasty (TKA) designs. The purpose of this study was to determine whether anatomic motion could be restored using a design where intercondylar guiding surfaces were positioned between the medial and lateral femoral condyles. METHODS: A crouching machine was constructed, which included simulations of the collateral ligaments, the quadriceps mechanism, the hamstrings, and the gastrocnemius. Medial pivot, medially congruent, ultracongruent, and replica intercondylar TKAs were designed and 3-dimensionally printed. The femoral-tibial kinematics were measured by determining lateral and medial contacts, as the knee underwent flexion and extension from 12 to 130°. RESULTS: The replica intercondylar design showed an almost constant position of the medial contact, with a progressive posterior displacement laterally during flexion. In contrast, the other designs showed nearly parallel motion with minimal variation in contact location. CONCLUSIONS: It was concluded that intercondylar guiding surfaces could produce anatomical motion in a TKA where the cruciate ligaments were resected.

来源:J Arthroplasty,查看原文。版权归原作者所有。

引用

  1. Parody N, Warren S, Hennessy D, et al. Achieving Anatomic Kinematics in a Noncruciate Total Knee Arthroplasty: Preclinical Evaluation Using a Crouching Machine. J Arthroplasty. 2026. PMID: 42373148. doi:10.1016/j.arth.2026.01.010

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。