全膝关节置换失败原因二十年变迁:2012至2023年单中心4084例翻修分析
本研究回顾性分析本机构2012至2023年4084例翻修全膝关节置换患者,并与2002年和2012年发表的两个既往系列比较翻修指征。结果显示假体无菌性松动、不稳、感染和聚乙烯磨损仍是主要失败原因,其中不稳比例较2012年上升至与2002年相当,聚乙烯磨损持续下降,早期翻修比例过去二十年下降,感染和松动仍是未解决问题。
要点
- 不稳导致的翻修比例较2012年上升,与2002年水平相当。
- 聚乙烯磨损作为失败原因持续下降,早期翻修比例过去二十年下降。
- 感染和无菌性松动仍是未解决的失败原因。
核心结论
- 过去十年因不稳行翻修的比例较2012年上升,与2002年水平相当,聚乙烯磨损作为失败原因持续下降。
- 早期失败过去二十年减少,提示手术技术改善,但感染和松动仍是未解决问题。
研究设计与样本
- 回顾性 reviewed 2012至2023年4084例翻修全膝关节置换患者,记录翻修和再翻修指征,并将失败时间分为早期(小于两年)和晚期(大于两年)。
- 将翻修指征与本机构2002年和2012年发表的既往系列比较,并行多因素分析识别再次手术的危险因素。
主要发现
- 与2002年和2012年系列相比,2024年常见失败原因包括无菌性松动(24.1% versus 39.9% versus 35.2%)、不稳(21.2% versus 7.5% versus 22.8%)、感染(17.5% versus 27.4% versus 20.1%)和聚乙烯磨损(25.0% versus 3.5% versus 3.3%,P < 0.01)。
- 早期翻修比例下降(55.6% versus 37.6% versus 30.0%,P < 0.01)。
- 早期失败常见原因包括感染(30.6%)、不稳(24.0%)和松动(20.5%),晚期失败原因为松动(42.1%)、不稳(22.5%)和感染(15.4%)(P < 0.0)。
- 因松动(比值比0.41,P < 0.01)和不稳(比值比0.34,P < 0.01)行翻修的患者再次手术可能性更低。
临床怎么用
- 翻修术前评估应关注不稳作为日益突出的失败原因,同时持续警惕感染和松动。
- 早期与晚期失败原因分布不同,可指导翻修策略的时机与重点。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: There were two previous studies at our institution that evaluated the reasons behind total knee arthroplasty (TKA) failure, the first from 1997 to 2000 and the second from 2003 to 2012. The purpose of this study was to evaluate the frequency and causes for TKA failure over the past decade and provide an updated comparison with our previous findings. METHODS: We retrospectively reviewed 4,084 revision TKA patients from 2012 to 2023. Indication for revision and re-revisions were recorded. Time to failure from primary TKA was classified as early (less than two years) or late (greater than two years). We compared indications for revision to prior series published at our institution in 2002 and 2012. A multivariate analysis was performed to identify risk factors for undergoing a subsequent surgery. RESULTS: When compared to patients from the 2002 and 2012 series, common causes of failure in 2024 included aseptic loosening (24.1 versus 39.9 versus 35.2%), instability (21.2 versus 7.5 versus 22.8%), infection (17.5 versus 27.4 versus 20.1%), and polyethylene wear (25.0 versus 3.5 versus 3.3%, P < 0.01). The percentage of early revisions declined (55.6 versus 37.6 versus 30.0%, P < 0.01). The prevalent causes of early failure included infection (30.6%), instability (24.0%), and loosening (20.5%), while late failures were caused by loosening (42.1%), instability (22.5%), and infection (15.4%) (both [P < 0.0])). Patients being revised for loosening (odds ratio 0.41, P < 0.01) and instability (odds ratio 0.34, P < 0.01) had a lower likelihood of undergoing a reoperation. CONCLUSION: In our 10-year update, the percentage of revisions done for instability increased since 2012, comparable to 2002 levels, while polyethylene wear continues to decrease as a cause of TKA failure. Early failures have decreased in the past two decades, suggesting improved surgical techniques. Infection and loosening remain unsolved problems.
引用
- Salehi N, Linton AA, Ezeonu S, et al. Why Are Total Knee Arthroplasties Failing Today: What Has Changed After Two Decades? J Arthroplasty. 2026. PMID: 41967987. doi:10.1016/j.arth.2026.02.020
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。