文献速递运动医学关节外科

股直肌腱作为前交叉韧带合并前外侧重建移植物的生物力学评估

The Rectus Femoris Tendon as a Graft for Combined ACL and Anterolateral Reconstruction: A Biomechanical Evaluation.
PubMed 文献 · Am J Sports Med · 2026-03-11

本研究采用8例新鲜冷冻人膝关节(男2例、女6例,平均年龄49岁,范围36-64岁)制备股直肌双股(DRF)、股直肌单股(SRF)、髌腱(PT)和髂胫束(ITB)四种移植物,在材料试验机上测定横截面积后行10次250 N预适应循环,再以100 mm/min拉伸至失败。结果显示DRF极限强度与PT无差异,SRF与ITB无差异,支持股直肌腱用于前交叉韧带合并前外侧重建。

要点

  • DRF极限强度1978±338 N与PT的1824±557 N无差异,均高于ITB的819±268 N(P<.01)。
  • 股直肌腱获取后平均长273 mm,可折叠使用且不造成股四头肌全层缺损。

核心结论

  • DRF移植物力学性能与PT移植物无差异,SRF移植物与ITB移植物无差异,支持股直肌腱用于ACL合并AL重建。

研究设计与样本

  • 对照实验室研究,使用8例新鲜冷冻人膝关节(男2例、女6例,平均年龄49岁,范围36-64岁),每膝制备DRF、SRF、PT、ITB四种移植物。

主要发现

  • 极限强度:DRF 1978±338 N,SRF 1445±584 N,PT 1824±557 N,ITB 819±268 N(DRF和PT>ITB,P<.01)。
  • 极限拉伸应力:DRF 51±12 MPa,SRF 89±28 MPa,PT 62±19 MPa,ITB 56±24 MPa(SRF>DRF,P<.05)。

关键数值与推荐

  • 预适应10次循环至250 N,随后以100 mm/min拉伸至失败。
  • 横截面积采用藻酸盐印模法测量。
  • 统计采用Friedman检验及Dunn多重比较检验。

临床怎么用

  • 股直肌腱可作为一种移植物选择,用于ACL合并AL(前外侧韧带或外侧关节外肌腱固定)重建。
  • 股直肌腱获取后平均长273 mm,适于折叠,且不造成股四头肌全层缺损。
  • 该移植物可为联合重建提供额外固定组织。

局限性

  • 本研究为离体生物力学研究,样本量8例,平均年龄49岁,临床结论需进一步验证。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: The rectus femoris (RF) tendon may be an option for combined anterior cruciate ligament (ACL) and anterolateral (AL) reconstruction utilizing a double-stranded (DRF) tendon for the ACL and a single-stranded tendon (SRF) for AL reinforcement; however, biomechanical data remain limited. PURPOSE/HYPOTHESIS: This study aimed to biomechanically assess the DRF for ACL reconstruction using a patellar tendon (PT) graft and the SRF for AL reconstruction using an iliotibial band (ITB) graft. The hypothesis was that the biomechanical properties of the DRF graft would not differ from those of the PT graft, and the SRF graft would not differ from the ITB graft. STUDY DESIGN: Controlled laboratory study. METHOD: Eight fresh-frozen human knees were used: 2 male and 6 female, with a mean age of 49 years (range, 36-64 years). Each knee produced 4 grafts: DRF, SRF, PT, and ITB. Each graft was mounted in a materials test machine. The cross-sectional area was measured using alginate molding. After 10 preconditioning cycles to 250 N, each specimen was extended to failure at 100 mm/min. The Friedman test assessed differences between the 4 graft types using matched samples. The Dunn multiple-comparison test was used to examine differences among graft types. RESULTS: The ultimate strengths (N) of the grafts were as follows: DRF, 1978 ± 338; SRF, 1445 ± 584; PT, 1824 ± 557; ITB, 819 ± 268 (DRF and PT >ITB; P < .01). The elastic moduli (MPa) were as follows: DRF, 272 ± 59; SRF, 617 ± 153; PT, 318 ± 90; ITB, 631 ±4 31 (DRF and PT<SRF; P < .05). The ultimate tensile stresses (MPa) were as follows: DRF, 51 ± 12; SRF, 89 ± 28; PT, 62 ± 19; ITB, 56 ± 24 (SRF > DRF; P < .05). CONCLUSION: As hypothesized, the DRF graft exhibits mechanical properties that do not differ from those of the PT graft. Likewise, the SRF graft showed biomechanical properties that do not differ from those of the ITB graft. Therefore, this study supports the use of the RF graft for combined ACL and AL (anterolateral ligament or lateral extra-articular tenodesis) reconstruction. CLINICAL RELEVANCE: The RF tendon graft is harvested before being merged with other layers, resulting in a longer graft (mean, 273 mm) suitable for folding. This does not create a full-thickness defect through the quadriceps. This approach allows combined ACL + AL reconstruction techniques and additional graft tissue for fixation.

来源:Am J Sports Med,查看原文。版权归原作者所有。

引用

  1. Mestriner MB, Reynolds A, Barrosso BG, et al. The Rectus Femoris Tendon as a Graft for Combined ACL and Anterolateral Reconstruction: A Biomechanical Evaluation. Am J Sports Med. 2026. PMID: 41808471. doi:10.1177/03635465261428128

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。