患者特异性有限元模型输出在预测融合器下沉方面优于临床指标
本研究基于42例经椎间孔腰椎椎间融合术(TLIF)患者的术前CT建立患者特异性有限元模型,比较其输出与传统临床测量对融合器严重下沉(≥4 mm)的预测能力。结论认为患者特异性有限元模型输出与临床下沉结局显著相关,分类严重下沉的能力优于部分传统指标。
要点
- 患者特异性有限元模型输出可预测TLIF术后融合器严重下沉。
- 平均小梁中间应变AUC=0.809,优于所有临床指标。
- 终板与骨小梁的应力应变均为重要预测因素。
核心结论
- 患者特异性有限元模型输出与临床下沉结局显著相关,并在分类严重下沉方面优于多个传统指标。
- 终板和骨小梁的应力与应变均为重要预测因素,平均值表现与峰值相当或更优。
- 将有限元模型整合入临床工作流有望提供全面的术前下沉预测工具。
研究设计与样本
- 研究设计为回顾性临床队列的有限元分析。
- 基于42例TLIF患者的术前CT建立患者特异性有限元模型,其中严重下沉(≥4 mm)22例、非严重下沉(<4 mm)20例。
- 对椎体几何进行分割,并根据Hounsfield单位(HU)赋予骨材料属性;将术后扫描的融合器位置配准至术前解剖。
- 采用受试者工作特征(ROC)分析比较有限元模型的终板与骨小梁应力应变与临床测量指标。
主要发现
- 平均小梁中间应变的曲线下面积(AUC)最高(AUC=0.809),优于所有临床指标。
- 终板最小主应力峰值是第二佳的有限元分类指标(AUC=0.775)。
- 传统临床指标的区分能力较低:融合器长度(AUC=0.797)、融合器宽度(AUC=0.750)、融合器高度(AUC=0.698)。
关键数值与推荐
- 严重下沉定义为下沉≥4 mm,非严重下沉定义为<4 mm。
- 平均小梁中间应变AUC=0.809,终板最小主应力峰值AUC=0.775。
- 融合器长度AUC=0.797,融合器宽度AUC=0.750,融合器高度AUC=0.698。
临床怎么用
- 对于接受TLIF的患者,可考虑基于术前CT建立患者特异性有限元模型以辅助预测融合器严重下沉风险。
- 有限元模型输出的应力与应变指标(尤其是平均值)可作为传统临床指标之外的补充预测信息。
- 将有限元模型整合入临床工作流可能帮助术前识别高风险患者并优化手术规划。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
STUDY DESIGN: Finite element (FE) analysis of retrospective clinical cohort. OBJECTIVE: To determine whether preoperative CT-derived FE model outputs can improve subsidence prediction compared with conventional clinical measurements alone in patients undergoing transforaminal lumbar interbody fusion (TLIF). SUMMARY OF BACKGROUND DATA: Cage subsidence occurs in ∼20% of spinal fusion patients and can lead to complications requiring reoperation. While individual risk factors are known, no validated tool integrates patient anatomy, bone quality, and implant characteristics to predict subsidence. Finite element models have been hypothesized to predict subsidence but lack clinical validation. MATERIALS AND METHODS: Patient-specific FE models were created from preoperative CT scans of 42 TLIF patients: N=22 severe subsidence (≥4 mm); N=20 nonsevere subsidence (<4 mm). Vertebral geometries were segmented, and bone material properties were assigned based on Hounsfield units (HU). Cage positions from postoperative scans were registered to preoperative anatomy. Endplate and trabecular stresses and strains from FE models were compared with clinical measures using receiver operating characteristic analysis. RESULTS: Fifteen principal stresses and strains of the FE simulations showed significantly higher values in severely subsided patients compared with the nonsevere group. Average trabecular intermediate strain achieved the highest area under the curve score (AUC=0.809), outperforming all clinical metrics. Peak endplate minimum principal stress (AUC=0.775) was the second-best FE classifier. Traditional clinical measures showed lower discriminative ability: cage length (AUC=0.797), cage width (AUC=0.750), and cage height (AUC=0.698). CONCLUSION: Patient-specific FE model outputs significantly correlate with clinical subsidence outcomes and outperform several traditional metrics in classifying severe subsidence. Both endplate and trabecular stresses and strains are important predictors, with average values showing comparable or superior performance to peak values. Integration of FE models into the clinical workflow could provide a comprehensive preoperative subsidence prediction tool.
引用
- Lali FHV, Raftery KA, Levy H, et al. Patient Specific Finite Element Modeling Outputs Outperform Clinical Metrics in Predicting Fusion Cage Subsidence. Spine (Phila Pa 1976). 2026. PMID: 41887667. doi:10.1097/BRS.0000000000005698
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。