肩胛盂骨缺损模型中凹面恢复对盂肱稳定性的影响:远端胫骨同种异体移植与内侧胫骨平台同种异体移植及远端锁骨自体移植的比较
这项尸体研究比较了远端胫骨同种异体移植(DTA)、内侧胫骨平台同种异体移植(MTPA)和远端锁骨自体移植(DCA)在肩胛盂骨缺损模型中恢复肩胛盂凹面和前方盂肱稳定性的效果。结果显示三种移植物的骨性肩关节稳定比(BSSR)和最大前方肱骨移位与完整状态无显著差异,表明均能恢复肩胛盂凹面至与完整状态相似的水平。
要点
- 三种移植物重建后BSSR与完整状态无显著差异。
- 最大前方肱骨移位在三种移植物与完整状态间无显著差异。
- DCA、MTPA和DTA均可作为可靠的游离骨块用于解剖性肩胛盂重建。
核心结论
- DCA、MTPA和DTA均能将肩胛盂凹面恢复至与完整状态相似的水平。
- 未来需要更大样本量的研究来确认这些生物力学趋势并确定临床意义。
研究设计与样本
- 研究类型为控制性实验室研究。
- 获取9组新鲜冷冻非配对肩、膝、踝尸体标本(平均年龄58.7岁,范围51-63)。
- 术前CT评估肩胛盂深度和半径以定义骨性肩关节稳定比(BSSR;肩胛盂深度除以半径)。
- 使用Kuka机器人评估肩关节稳定性,通过肩袖加载力,肩关节处于90°外展中立位。
- 通过10-mm截骨建立肩胛盂骨缺损,每种移植物恢复100%原生肩胛盂宽度。
主要发现
- BSSR在完整状态(均值±标准差,0.39±0.11)与三种重建移植物之间相似:DCA 0.46±0.11(P=.10);MTPA 0.43±0.07(P=.45);DTA 0.39±0.11(P=.21)。
- 最大前方移位在三种移植物之间无差异:DCA 6.4±3.0 mm(P=.29);MTPA 8.4±5.3 mm(P=.11);DTA 6.7±3.6 mm(P=.21);完整状态为6.0±2.8 mm。
临床怎么用
- 对于伴有临界肩胛盂骨缺损的前方肩关节不稳患者,恢复肩胛盂凹面对实现稳定性至关重要。
- 本生物力学研究表明DCA、DTA和MTPA均可恢复原生肩胛盂凹面至与完整状态相当的水平,支持其作为解剖性肩胛盂重建的可靠游离骨块选择。
- 未来需要临床研究来确定这些生物力学发现是否能转化为改善的临床结局。
局限性
- 研究为尸体生物力学分析,未来需要更大样本量的研究来确认这些生物力学趋势并确定临床意义。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Multiple grafts have been described for glenoid resurfacing in the setting of anterior shoulder instability with glenoid bone loss. The medial tibial plateau has been shown to have a similar radius of curvature to the glenoid and may be an appropriate anatomic match for glenoid resurfacing. PURPOSE: To evaluate restoration of glenoid concavity and anterior glenohumeral stability among the distal tibial allograft (DTA), distal clavicle autograft (DCA), and medial tibial plateau allograft (MTPA). STUDY DESIGN: Controlled laboratory study. METHODS: Nine sets of fresh-frozen unpaired shoulder, knee, and ankle cadaveric specimens were obtained (mean specimen age, 58.7 years; range, 51-63). Specimens underwent preoperative computed tomography to assess glenoid depth and radius to define the bony shoulder stability ratio (BSSR; glenoid depth over radius). A Kuka robot was used to assess shoulder stability with forces loaded through the rotator cuff and the shoulder in 90° of abduction and neutral rotation. Glenoid bone loss was created via a 10-mm cut, with each graft restoring 100% of the native glenoid width. The following conditions were tested: intact state followed by reconstructions with the DTA, MTPA, and DCA. Posttest computed tomography scans were obtained to calculate the reconstructed BSSR, and motion detectors were used to calculate maximum anterior humeral translation. RESULTS: The BSSR was similar between the intact state (mean ± SD, 0.39 ± 0.11) and 3 reconstructed glenoid grafts (DCA, 0.46 ± 0.11 [P = .10]; MTPA, 0.43 ± 0.07 [P = .45]; DTA, 0.39 ± 0.11 [P = .21]). Maximum anterior translation did not differ between the 3 grafts (DCA, 6.4 ± 3.0 mm [P = .29]; MTPA, 8.4 ± 5.3 mm [P = .11]; DTA, 6.7 ± 3.6 mm [P = .21]) and the intact state (6.0 ± 2.8). CONCLUSION: By way of a cadaveric analysis, the DCA, MTPA, and DTA restored glenoid concavity to a point similar to the intact state. Future investigations with larger sample sizes are warranted to confirm these biomechanical trends and determine clinical significance. CLINICAL RELEVANCE: Restoration of glenoid concavity is essential for achieving stability in patients with anterior shoulder instability and critical glenoid bone loss. This biomechanical study demonstrates that distal clavicle autograft, distal tibia allograft, and medial tibial plateau allograft each restore native glenoid concavity comparable to the intact state, supporting their use as reliable free bone block options for anatomic glenoid reconstruction. Future clinical studies are warranted to determine whether these biomechanical findings translate to improved clinical outcomes.
引用
- Cusano A, Jahandar A, White AE, et al. The Effect of Concavity Restoration on Glenohumeral Stability in a Glenoid Bone Loss Model: Comparing Distal Tibial Allograft vs Medial Tibial Plateau Allograft vs Distal Clavicle Autograft. Am J Sports Med. 2026. PMID: 41655196. doi:10.1177/03635465261415825
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。