文献速递运动医学关节外科

缝合带能否优于传统缝线修复桡侧半月板撕裂?生物力学尸体研究

Can Suture Tape Improve Radial Meniscal Tear Repair Over Traditional Suture? A Biomechanical Cadaveric Study.
PubMed 文献 · Am J Sports Med · 2026-02-23

该研究在28个新鲜冷冻成人外侧半月板中制造完全桡侧撕裂,比较hashtag修复中四种缝线配置的生物力学强度。结果显示全缝合带组失败载荷显著高于2-0缝线组,且混合v1(缝合带作钢筋、2-0作水平)刚度最高。结论提示缝合带置于钢筋部分可提升修复强度。

要点

  • 全缝合带组失败载荷显著高于全2-0缝线组。
  • 混合v1组刚度显著高于全2-0组和混合v2组。
  • 水平缝线类型对修复强度与刚度无显著影响。

核心结论

  • 缝合带可提高hashtag修复桡侧半月板撕裂的强度和刚度,其增强作用归因于钢筋部分的缝合带。

研究设计与样本

  • 控制实验室研究,使用28个新鲜冷冻成人外侧半月板中体完全桡侧撕裂模型。

主要发现

  • 全缝合带组失败载荷为189.8 ± 16.1 N,显著高于全2-0组的145.6 ± 39.6 N(P = .0357)。
  • 混合v1组失败载荷为191.2 ± 31.8 N,与全缝合带组无显著差异(P = .9997)。
  • 混合v2组失败载荷为141.9 ± 19.7 N,显著低于全缝合带组(P = .0205)和混合v1组(P = .0167)。
  • 混合v1组刚度为16.4 ± 2.3 N/mm,显著高于全2-0组的13.2 ± 2.8 N/mm(P = .0497)和混合v2组的12.7 ± 1.7 N/mm(P = .0182)。

关键数值与推荐

  • 全缝合带组失败载荷189.8 ± 16.1 N,全2-0组145.6 ± 39.6 N,混合v1组191.2 ± 31.8 N,混合v2组141.9 ± 19.7 N。
  • 混合v1组刚度16.4 ± 2.3 N/mm,全2-0组13.2 ± 2.8 N/mm,混合v2组12.7 ± 1.7 N/mm。
  • 循环加载500次后进行失败载荷测试。

临床怎么用

  • 在hashtag修复桡侧半月板撕裂时,可考虑将缝合带用于钢筋部分以提升修复强度。

局限性

  • 研究为尸体生物力学实验,结果不能直接等同于临床疗效。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: While studies have demonstrated that the "hashtag" suture pattern may improve biomechanical repair properties in radial meniscal tears, the effect of the type of suture within the hashtag is unknown. HYPOTHESIS/PURPOSE: The purpose of this study was to evaluate the repair strength of the hashtag repair using suture tape compared to traditional 2-0 suture. It was hypothesized that suture tape, particularly in the "rebar" portion of the hashtag repair, would significantly increase construct strength compared to traditional 2-0 suture. STUDY DESIGN: Controlled laboratory study. METHODS: Complete radial tears were made at the midbody of 28 fresh-frozen adult lateral menisci. Specimens underwent hashtag repair with 1 of 4 different suture configurations: all 2-0 suture (2-0), all suture tape (tape), suture tape as the rebar and 2-0 suture as the horizontal component (hybrid v1), or 2-0 suture as the rebar and suture tape as the horizontal component (hybrid v2). Specimens were loaded in a tensile testing system and cyclically loaded for 500 cycles before load-to-failure testing. Load-to-failure (N), stiffness (N/mm), and mechanism of failure were recorded. Data were analyzed using analysis of variance with the Tukey multiple comparisons test. RESULTS: Tape constructs demonstrated significantly higher load-to-failure compared to 2-0 constructs (189.8 ± 16.1 N vs 145.6 ± 39.6 N; P = .0357). There was no significant difference between tape and hybrid v1 constructs (189.8 ± 16.1 N vs 191.2 ± 31.8 N; P = .9997). Hybrid v2 constructs failed at significantly lower loads (141.9 ± 19.7 N) compared to both tape and hybrid v1 repairs (P = .0205 and P = .0167, respectively). Hybrid v1 constructs also showed significantly higher stiffness (16.4 ± 2.3 N/mm) compared to 2-0 (13.2 ± 2.8 N/mm) and hybrid v2 (12.7 ± 1.7 N/mm) constructs (P = .0497 and P = .0182, respectively). CONCLUSION: Suture tape increased the hashtag repair strength and stiffness in radial meniscal tears in cadaveric menisci, with the improved strength attributed to suture tape in the rebar limb. The horizontal suture type did not significantly affect construct strength or stiffness. These data suggest that suture tape may significantly improve the biomechanical repair strength of hashtag radial meniscal tear repairs. CLINICAL RELEVANCE: Radial meniscal tears are difficult to repair and are associated with poor prognosis, necessitating further research into optimal repair constructs.

来源:Am J Sports Med,查看原文。版权归原作者所有。

引用

  1. Stoner AJ, Huang A, Alayleh AM, et al. Can Suture Tape Improve Radial Meniscal Tear Repair Over Traditional Suture? A Biomechanical Cadaveric Study. Am J Sports Med. 2026. PMID: 41731314. doi:10.1177/03635465261422715

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。