文献速递运动医学关节外科

残余肩袖肌亚区的代偿性载荷分配在部分与巨大撕裂中维持盂肱关节力学

Compensatory Load Sharing by Residual Rotator Cuff Subregions Preserves Glenohumeral Mechanics in Partial and Massive Tears.
PubMed 文献 · J Bone Joint Surg Am · 2026-02-04

研究用8例新鲜冷冻男性尸体肩关节建立4种渐进性肩袖撕裂模型,比较负载、卸载和代偿三种加载条件。卸载增加肱骨头向上和向后移位并降低接触力与面积;残余肩袖代偿性加载使向上移位减少34%至44%、向后移位减少60%至68%,将肱骨头中心恢复至完整状态0.1至1.7 mm以内,但最大撕裂模型中接触压力仍升高。

要点

  • 残余肩袖亚区代偿可部分恢复肱骨头中心化和盂肱接触力学。
  • 代偿使向上移位减少34%至44%、向后移位减少60%至68%。
  • 最大撕裂模型中接触压力仍升高,提示晚期需手术干预。

核心结论

  • 残余肩袖亚区可在渐进性肩袖撕裂中部分恢复肱骨头中心化和盂肱接触力学。
  • 晚期撕裂状态下代偿有限,提示可能需要手术恢复横断面力偶完整性。

研究设计与样本

  • 研究纳入8例新鲜冷冻男性尸体肩关节,平均年龄56岁,其中6例白人、2例黑人。
  • 分离肩袖肌亚区并建立4种渐进性撕裂模型:Tear I为冈上肌加冈下肌上部,Tear II为冈上肌加完整冈下肌,Tear III为冈上肌加冈下肌加肩胛下肌上三分之一,Tear IV为Tear III加喙肱韧带。
  • 每种模型在10°外展中立旋转下接受3种加载条件:负载、卸载和代偿。

主要发现

  • 卸载条件在多数模型中显著增加肱骨头向上和向后移位并降低接触力与面积,尤其在Tear III和Tear IV中。
  • 残余肩袖亚区代偿性加载使向上移位减少34%至44%,向后移位减少60%至68%。
  • 代偿性加载将肱骨头中心恢复至完整状态0.1至1.7 mm以内。
  • 代偿性加载下接触力和面积部分恢复,但最大撕裂模型中接触压力仍升高。

临床怎么用

  • 支持对部分或早期巨大肩袖撕裂患者进行后侧肩袖针对性强化,以维持关节一致性、减少异常接触力学和肱骨头移位,并可能延缓肩袖撕裂关节病进展。
  • 晚期撕裂可能需要手术修复,尤其肩胛下肌修复,以完全恢复力偶和载荷分布。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Rotator cuff (RC) tears are common shoulder injuries that cause pain, dysfunction, and abnormal humeral head translation. Balanced force couples in the transverse and coronal planes help to maintain normal glenohumeral mechanics. Although clinical and biomechanical studies have suggested that compensatory activation of residual RC muscles preserves function, the contribution of individual RC subregions to glenohumeral contact mechanics and humeral head translations across progressively increasing tear sizes remains unclear. METHODS: Eight fresh-frozen male cadaveric shoulders (mean age, 56 years; 6 Caucasian; 2 Black) were dissected to isolate RC muscle subregions, and 4 progressive RC tear models were created: Tear I (supraspinatus [SSP] + superior region of the infraspinatus [ISP]), Tear II (SSP + complete ISP), Tear III (SSP + ISP + superior one-third of the subscapularis [SSC]), and Tear IV (SSP + ISP + superior one-third of the SSC + coracohumeral ligament). Each model underwent 3 loading conditions: loaded (as in the intact state), unloaded (i.e., unloading of the torn regions), and compensatory (i.e., increased loading of the remaining subregions). Humeral head translations and glenohumeral contact force, area, and pressure were measured at 10° of abduction with neutral rotation. RESULTS: Unloaded conditions significantly increased superior and posterior humeral head translations and reduced contact force and area in most models, particularly in Tears III and IV. Compensatory loading by residual RC subregions reduced superior translation by 34% to 44% and posterior translation by 60% to 68%, restoring the humeral head center to within 0.1 to 1.7 mm of its position in the intact condition. Contact forces and areas partially recovered under compensatory loading; however, contact pressure remained elevated in the largest tear model. CONCLUSIONS: Residual RC subregions can partially restore humeral head centering and glenohumeral contact mechanics in progressive RC tears. However, compensation is limited in advanced tear states, highlighting the potential need for surgical intervention to restore force-couple integrity in the transverse plane. CLINICAL RELEVANCE: These findings support targeted strengthening of the posterior cuff in patients with partial or early-stage massive RC tears to help maintain joint congruency, minimize abnormal glenohumeral contact mechanics and humeral head translation, and potentially delay the progression to cuff tear arthropathy. Surgical repair, particularly of the SSC, may be required in advanced tears to fully restore force coupling and load distribution.

来源:J Bone Joint Surg Am,查看原文。版权归原作者所有。

引用

  1. Hoshikawa K, Jacobs PM, Mura N, et al. Compensatory Load Sharing by Residual Rotator Cuff Subregions Preserves Glenohumeral Mechanics in Partial and Massive Tears. J Bone Joint Surg Am. 2026. PMID: 41637491. doi:10.2106/JBJS.25.01073

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。