解剖型肩关节置换术中的肱骨头重建:如何评估、如何避免过度填充及是否重要
该综述讨论解剖型肩关节置换术中肱骨头重建的评估方法、避免过度填充的技术要点及其临床意义。文章指出肱骨头解剖影响盂肱关节张力与力学,偏心距超过3至4毫米与临床结果较差相关,但无证据表明无柄、短柄或标准柄假体在重建质量上存在优劣。
要点
- 肱骨头重建评估常用「完美圆」法,但需结合曲率半径、传统解剖测量或盂肱厚度综合判断。
- 无柄、短柄或标准柄假体在肱骨头重建质量上无一致证据显示优劣,手术技术与假体熟悉度更为重要。
- 旋转中心偏离完美圆超过3至4毫米与临床结果较差相关,而轻度偏离似不影响临床结局。
核心结论
- 肱骨头解剖影响盂肱关节张力和力学,以解剖重建为目标有助于避免假体位置不良(如过度填充)对软组织张力和无撞击活动度造成不良后果。
研究设计与样本
- 本文为综述,围绕解剖型肩关节置换术中肱骨头重建的评估方法、过度填充的避免及临床意义进行论述。
主要发现
- 旋转中心偏离完美圆超过3至4毫米与临床结果较差相关。
- 与关节炎前解剖的轻度偏差似乎不影响临床结局。
- 无柄、短柄或标准长度肱骨假体在肱骨头重建质量上无一致证据显示优劣。
- 无柄和短柄假体在重建关节炎前解剖方面具有灵活性,但强调肱骨颈截骨深度和倾斜角需有可重复技术。
关键数值与推荐
- 最常用的肱骨头重建评估方法是将假体肱骨关节面与包含大结节外侧皮质、大结节内侧和解剖颈内侧股骨矩的「完美圆」进行比较。
- 评估时还应比较曲率半径、采用肱骨头解剖的传统测量或盂肱厚度,并考虑为实现张力目标而使用非解剖尺寸。
- 部分技术包括仔细切除骨赘以显露真正解剖颈、使用髓内导向器以及术中透视评估。
临床怎么用
- 原文未据此给出推荐。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
➢ Humeral head anatomy affects the tension and mechanics of the glenohumeral joint. Thus, aiming for anatomic reconstruction can help to avoid negative consequences of component malpositioning (such as "overstuffing") on soft-tissue tension and impingement-free range of motion.➢ The most common method to assess humeral head reconstruction is comparing the prosthetic humeral articular surface with the "perfect circle" incorporating the lateral cortex of the greater tuberosity, the medial greater tuberosity, and the medial calcar at the anatomic neck. Although this method is quick and helpful in assessing multiple parameters, it is important to also compare the radius of curvature, assess traditional measurements of humeral head anatomy or glenohumeral thickness, and consider that non-anatomic sizing may be used to achieve tension goals.➢ There is no consistent evidence of superior humeral head reconstruction quality with stemless, short-stem, or standard-length humeral components, suggesting that surgical technique and familiarity with an implant system remain most important.➢ Although stemless and short-stem components offer versatility in recreating pre-arthritic anatomy, their use places emphasis on having a reproducible technique for humeral neck osteotomy depth and inclination. Some techniques include careful osteophyte resection to visualize the true anatomic neck, the use of an intramedullary guide, and intraoperative assessment with fluoroscopy.➢ Although small deviations from pre-arthritic anatomy do not appear to affect clinical outcome, center-of-rotation deviations of exceeding 3 to 4 mm from the perfect circle have been associated with an inferior clinical outcome.
引用
- Sheth MM, Hsu JE. Humeral Head Reconstruction in Anatomic Shoulder Arthroplasty: How to Assess It, How to Avoid Overstuffing, and Whether It Matters. J Bone Joint Surg Am. 2025. PMID: 41498769. doi:10.2106/JBJS.24.01583
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。