文献速递关节外科

传统与模块化双动髋臼杯的随机对照试验:血清金属水平是否值得关注?

A Randomized Controlled Trial of a Conventional Versus Modular Dual-Mobility Bearing: Are Serum Metal Levels a Concern?
PubMed 文献 · J Bone Joint Surg Am · 2025-11-13

这项随机对照试验纳入53例因骨关节炎行初次全髋关节置换术的患者,比较模块化双动髋臼杯与传统聚乙烯髋臼杯的血清金属水平及患者报告结局。41例随访至少2年的患者中,术后2年模块化双动组与传统组血清钴、铬水平无显著差异。双动组术后血清钴、铬较术前有轻度预期升高,但钴水平均未超出实验室参考范围或1 ng/mL阈值。

要点

  • 术后2年模块化双动组与传统组血清钴、铬水平无显著差异。
  • 双动组术后血清钴、铬较术前有轻度预期升高,但钴水平未超出实验室参考范围或1 ng/mL阈值。
  • 两组患者报告结局评分比较未见显著差异。

核心结论

  • 在接受陶瓷股骨头和该特定双动髋臼杯的患者中,术后1年和2年血清钴、铬水平与陶瓷股骨头加传统髋臼杯相比无显著差异。
  • 双动组术后血清钴、铬较术前有轻度预期升高,但钴水平均未超出实验室参考范围或与机械辅助缝隙腐蚀所致不良局部组织反应相关的1 ng/mL阈值。

研究设计与样本

  • 随机对照试验,纳入因骨关节炎行初次全髋关节置换术的患者,随机接受模块化双动或传统聚乙烯髋臼杯。
  • 所有患者均使用相同的钛髋臼和股骨组件及陶瓷股骨头。
  • 共纳入53例患者,两组人口学特征无显著差异。
  • 41例随机分组且随访至少2年的患者接受血清金属分析,其中模块化双动组24例,传统组17例。

主要发现

  • 术后2年模块化双动组血清钴平均水平为0.14 ng/mL(范围0.075至0.29 ng/mL),传统组为0.21 ng/mL(范围0.075至0.57 ng/mL),p=0.22。
  • 术后2年模块化双动组血清铬平均水平为0.14 ng/mL(范围0.05至0.50 ng/mL),传统组为0.12 ng/mL(范围0.05至0.35 ng/mL),p=0.65。
  • 传统组中76%为白人、24%为黑人/非裔美国人,48%为男性、52%为女性;双动组中86%为白人、14%为黑人/非裔美国人,79%为男性、21%为女性。

关键数值与推荐

  • 术后2年模块化双动组血清钴平均水平0.14 ng/mL(范围0.075至0.29 ng/mL)对比传统组0.21 ng/mL(范围0.075至0.57 ng/mL),p=0.22。
  • 术后2年模块化双动组血清铬平均水平0.14 ng/mL(范围0.05至0.50 ng/mL)对比传统组0.12 ng/mL(范围0.05至0.35 ng/mL),p=0.65。
  • 双动组钴水平均未超出实验室参考范围或1 ng/mL阈值。

临床怎么用

  • 原文未据此给出推荐。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: The primary purpose of this randomized controlled trial was to evaluate serum metal levels in patients after total hip arthroplasty (THA) with a conventional compared with a modular dual-mobility bearing. The secondary aim was to compare patient-reported outcome measure (PROM) scores between the 2 cohorts. METHODS: Patients undergoing primary THA for osteoarthritis were randomized to receive either a modular dual-mobility or conventional polyethylene bearing. All patients received the same titanium acetabular and femoral components and a ceramic femoral head. Serum cobalt and chromium levels were measured preoperatively and annually at 1 through 5 years postoperatively. A total of 53 patients were enrolled. The 2 cohorts did not differ significantly in terms of demographics. In the conventional-bearing cohort, 76% of the patients were White and 24% were Black, African American; 48% of the patients were male and 52% were female. In the dual-mobility cohort, 86% of the patients were White and 14% were Black, African American; 79% of the patients were male and 21% were female. RESULTS: Forty-one patients who were randomized to a modular dual-mobility (n = 24) or conventional (n = 17) bearing and had a minimum follow-up of 2 years underwent serum metal analysis. No differences in serum cobalt levels (mean, 0.14 ng/mL [range, 0.075 to 0.29 ng/mL] versus 0.21 ng/mL [range, 0.075 to 0.57 ng/mL]; p = 0.22) or chromium levels (mean, 0.14 ng/mL [range, 0.05 to 0.50 ng/mL] versus 0.12 ng/mL [range, 0.05 to 0.35 ng/mL]; p = 0.65) were identified between the modular dual-mobility and conventional cohorts, respectively, at the 2-year postoperative time point. CONCLUSIONS: There were no significant differences in serum cobalt or chromium levels at 1 and 2 years postoperatively in patients who received a ceramic femoral head and this specific dual-mobility bearing compared with a ceramic head and a conventional acetabular component. While modest expected elevations in postoperative relative to preoperative serum cobalt and chromium levels were observed in the dual-mobility group, in no case did the cobalt level exceed the laboratory reference range or the threshold of 1 ng/mL that has been associated with adverse local tissue reactions due to mechanically assisted crevice corrosion. LEVEL OF EVIDENCE: Therapeutic Level I . See Instructions for Authors for a complete description of levels of evidence.

来源:J Bone Joint Surg Am,查看原文。版权归原作者所有。

引用

  1. DeBenedetti A, Weintraub MT, Skipor A, et al. A Randomized Controlled Trial of a Conventional Versus Modular Dual-Mobility Bearing: Are Serum Metal Levels a Concern? J Bone Joint Surg Am. 2025. PMID: 41231919. doi:10.2106/JBJS.24.01479

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。