50岁及以下患者使用第四代陶瓷32毫米股骨头与高交联聚乙烯行全髋关节置换术至少10年随访
回顾性研究纳入2008年12月至2010年12月间103例(平均37岁,范围13至50岁)使用第四代陶瓷32毫米股骨头与高交联聚乙烯内衬的全髋关节置换术。全因翻修生存率5年与10年均为97.1%,15年为95.4%,磨损相关翻修15年生存率100%;磨损率低,改良Harris髋关节评分、加州大学洛杉矶分校活动评分及西安大略和麦克马斯特大学骨关节炎指数疼痛评分均改善,患者满意度高。
要点
- 全因翻修生存率5年97.1%、10年97.1%、15年95.4%,磨损相关翻修15年生存率100%。
- 平均线性磨损率0.0184毫米/年,平均体积磨损率18.38立方毫米/年。
- 改良Harris髋关节评分由48±16升至84±22,西安大略和麦克马斯特大学骨关节炎指数疼痛评分由45±21升至86±23。
核心结论
- 作者认为,对50岁及以下患者,使用第四代陶瓷32毫米股骨头与高交联聚乙烯内衬的全髋关节置换术在至少10年随访中表现出优异的生存率、极低的磨损和高患者满意度。
研究设计与样本
- 回顾性研究,纳入2008年12月至2010年12月间103例使用第四代陶瓷32毫米股骨头与高交联聚乙烯内衬的全髋关节置换术,平均年龄37岁(范围13至50岁)。
- 术前及每次随访收集改良Harris髋关节评分、加州大学洛杉矶分校活动评分和西安大略和麦克马斯特大学骨关节炎指数疼痛评分,采用Martell髋关节分析计算磨损。
主要发现
- 全因翻修生存率5年为97.1%(95%CI 93.8至100.0),10年为97.1%(95%CI 93.8至100.0),15年为95.4%(95%CI 90.9至99.9)。
- 磨损相关翻修生存率15年为100%。
- 共4髋(3.9%)接受翻修,翻修时间平均为术后5.1年(范围0.04至13.2年)。
- 平均线性磨损率为0.0184毫米/年(标准差±0.043),平均体积磨损率为18.38立方毫米/年(标准差±22.55)。
- 改良Harris髋关节评分由48±16升至84±22(P<0.001),加州大学洛杉矶分校评分由5.5±2.3升至6.2±2.1(P=0.031),西安大略和麦克马斯特大学骨关节炎指数疼痛评分由45±21升至86±23(P<0.001);患者满意度中73%为「极其满意」、13%为「非常满意」。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Total hip arthroplasty (THA) with third-generation alumina ceramic heads on highly cross-linked polyethylene liners (HXLPE) has demonstrated excellent outcomes in young patients. However, there is limited data for fourth-generation ceramic heads. The purpose of our study was to report on clinical and wear, outcomes of THA with fourth-generation 32-mm ceramic femoral heads and HXLPE liners in patients 50 years or younger at 10-year minimum follow-up. METHODS: This was a retrospective study of 103 THAs with fourth-generation 32-mm ceramic femoral heads on HXLPE between December 2008 and December 2010. The mean age was 37 years (range, 13 to 50). The modified Harris Hip Score, University of California, Los Angeles Activity Score, and Western Ontario and McMaster University Osteoarthritis Index pain score were collected preoperatively and at each follow-up. Martell Hip Analysis was used for wear calculations. RESULTS: Survivorship from all-cause revision was 97.1% (95% confidence interval (CI), 93.8 to 100.0) at 5 years, 97.1% (95% CI, 93.8 to 100.0) at 10 years, and 95.4% (95% CI, 90.9 to 99.9) at 15 years. Survivorship from wear-related revision was 100% at 15 years. There were four hips (3.9%) that underwent revision at a mean of 5.1 years (range, 0.04 to 13.2) postoperatively. The mean linear wear rate was 0.0184 mm/year (SD ± 0.043); the mean volumetric wear rate was 18.38 mm3/year (SD ± 22.55). Improvements were observed in the modified Harris Hip Score (48 ± 16 to 84 ± 22; P < 0.001), University of California, Los Angeles score (5.5 ± 2.3 to 6.2 ± 2.1; P = 0.031), and Western Ontario and McMaster Universities Arthritis Index pain score (45 ± 21 to 86 ± 23; P < 0.001). Patient satisfaction scores were 73% "extremely satisfied" and 13% "very satisfied." CONCLUSIONS: The fourth-generation ceramic 32-mm femoral heads on HXLPE in THA for patients aged 50 years or younger demonstrate excellent survivorship, minimal wear, and high patient satisfaction at a 10-year minimum follow-up.
引用
- Adil SA, Gutbrod JT, Shah VP, et al. Minimum 10-Year Follow-Up of Patients 50 Years or less Undergoing Total Hip Arthroplasty Who Have Fourth-Generation Ceramic 32-mm Femoral Heads on Highly Cross-Linked Polyethylene. J Arthroplasty. 2025. PMID: 40930468. doi:10.1016/j.arth.2025.08.077
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。