文献速递关节外科

关节炎膝关节解剖存在不同的三维形态:基于CT的表型分析有助于全膝关节置换术中的异常值检测

Distinct 3-Dimensional Morphologies of Arthritic Knee Anatomy Exist: CT-Based Phenotyping Offers Outlier Detection in Total Knee Arthroplasty.
PubMed 文献 · J Bone Joint Surg Am · 2025-08-29

该横断面分析基于单中心多中心转诊中心数据库的1,352例全膝关节置换术前下肢CT扫描,使用经验证的深度学习和计算机视觉程序获取27项下肢测量指标,并通过无监督谱聚类算法进行形态学分类。谱聚类识别出4种不同的术前解剖形态(1型18.5%、2型39.6%、3型7.5%、4型34.5%),其中1型和3型为明显异常值,占接受全膝关节置换术膝关节的26%。作者认为基于CT的表型分析可为形态多样且不断增长的手术人群提供识别异常病例的基础,并需要纵向研究评估该分类的影响。

要点

  • 基于CT的谱聚类分析将全膝关节置换术前关节炎膝关节解剖分为4种三维形态。
  • 1型和3型为明显异常值,合计占接受全膝关节置换术膝关节的26%。
  • 区分4种形态的关键参数包括髋旋转、内侧后胫骨斜率、髋-膝-踝角、胫股角、内侧近端胫骨角和外侧远端股骨角。

核心结论

  • 基于CT的表型分析建立了关节炎膝关节解剖的三维分类,分为4种基础形态,其中1型和3型代表异常值,存在于26%接受全膝关节置换术的膝关节中。
  • 与既往强调原生冠状面解剖的分类不同,接受全膝关节置换术膝关节的三维表型分析能够识别异常病例,并为形态多样且不断增长的手术人群提供纵向评估的基础。
  • 需要控制植入物选择、对线技术和应用技术的纵向研究来评估该分类在促进快速康复和减轻全膝关节置换术后不满意方面的作用。

研究设计与样本

  • 横断面分析,使用来自单中心多中心转诊中心数据库的1,352例全膝关节置换术前下肢CT扫描。
  • 使用经验证的深度学习和计算机视觉程序获取每例CT扫描的27项下肢测量指标,并通过无监督谱聚类算法对队列进行形态学分类。
  • 通过肘部图和特征间隙分析确定最佳聚类数,通过t-随机邻域嵌入进行可视化,并对每个聚类进行特征描述。
  • 通过移除受严重畸形影响的参数并重新评估聚类分离度,重复分析以评估严重畸形对结果的影响。
  • 证据等级为预后II级。

主要发现

  • 谱聚类揭示4种不同的全膝关节置换术前解剖形态:1型18.5%、2型39.6%、3型7.5%、4型34.5%。
  • 1型和3型为明显异常值,合计占接受全膝关节置换术膝关节的26%。
  • 区分4种形态的关键参数为髋旋转、内侧后胫骨斜率、髋-膝-踝角、胫股角、内侧近端胫骨角和外侧远端股骨角。
  • 移除受严重畸形影响的变量后,二次分析再次显示4个不同聚类,且区分变量相同。

临床怎么用

  • 作者认为基于CT的三维表型分析能够识别全膝关节置换术中的异常病例,并为形态多样且不断增长的手术人群提供纵向评估的基础。
  • 作者指出需要控制植入物选择、对线技术和应用技术的纵向研究来评估该分类在促进快速康复和减轻全膝关节置换术后不满意方面的作用。

局限性

  • 需要控制植入物选择、对线技术和应用技术的纵向研究来评估该分类在促进快速康复和减轻全膝关节置换术后不满意方面的作用。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: There is no foundational classification that 3-dimensionally characterizes arthritic anatomy to preoperatively plan and postoperatively evaluate total knee arthroplasty (TKA). With the advent of computed tomography (CT) as a preoperative planning tool, the purpose of this study was to morphologically classify pre-TKA anatomy across coronal, axial, and sagittal planes to identify outlier phenotypes and establish a foundation for future philosophical, technical, and technological strategies. METHODS: A cross-sectional analysis was conducted using 1,352 pre-TKA lower-extremity CT scans collected from a database at a single multicenter referral center. A validated deep learning and computer vision program acquired 27 lower-extremity measurements for each CT scan. An unsupervised spectral clustering algorithm morphometrically classified the cohort. The optimal number of clusters was determined through elbow-plot and eigen-gap analyses. Visualization was conducted through t-stochastic neighbor embedding, and each cluster was characterized. The analysis was repeated to assess how it was affected by severe deformity by removing impacted parameters and reassessing cluster separation. RESULTS: Spectral clustering revealed 4 distinct pre-TKA anatomic morphologies (18.5% Type 1, 39.6% Type 2, 7.5% Type 3, 34.5% Type 4). Types 1 and 3 embodied clear outliers. Key parameters distinguishing the 4 morphologies were hip rotation, medial posterior tibial slope, hip-knee-ankle angle, tibiofemoral angle, medial proximal tibial angle, and lateral distal femoral angle. After removing variables impacted by severe deformity, the secondary analysis again demonstrated 4 distinct clusters with the same distinguishing variables. CONCLUSIONS: CT-based phenotyping established a 3D classification of arthritic knee anatomy into 4 foundational morphologies, of which Types 1 and 3 represent outliers present in 26% of knees undergoing TKA. Unlike prior classifications emphasizing native coronal plane anatomy, 3D phenotyping of knees undergoing TKA enables recognition of outlier cases and a foundation for longitudinal evaluation in a morphologically diverse and growing surgical population. Longitudinal studies that control for implant selection, alignment technique, and applied technology are required to evaluate the impact of this classification in enabling rapid recovery and mitigating dissatisfaction after TKA. LEVEL OF EVIDENCE: Prognostic Level II . See Instructions for Authors for a complete description of levels of evidence.

来源:J Bone Joint Surg Am,查看原文。版权归原作者所有。

引用

  1. Woo JJ, Hasan SS, Zhang YB, et al. Distinct 3-Dimensional Morphologies of Arthritic Knee Anatomy Exist: CT-Based Phenotyping Offers Outlier Detection in Total Knee Arthroplasty. J Bone Joint Surg Am. 2025. PMID: 40880455. doi:10.2106/JBJS.24.01466

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。