全髋关节翻修中髋臼假体翻修同期植入限制性内衬10年假体固定失败风险低
本研究回顾性分析2001至2021年在本院行全髋关节翻修、髋臼假体翻修同期植入限制性内衬的174例翻修病例,平均随访8.7年。因无菌性髋臼假体松动(固定失败)需再翻修的10年生存率为98.1%,全因再翻修10年生存率为79.9%;作者认为在固定稳定的髋臼假体翻修同期植入限制性内衬是安全的,髋臼假体固定失败风险很低。
要点
- 髋臼假体翻修同期植入限制性内衬后,因固定失败再翻修的5年生存率为98.9%、10年生存率为98.1%。
- 全因再翻修生存率5年为84.9%、10年为79.9%,再翻修最常见原因为不稳定(14例)。
- 作者认为在固定稳定的髋臼假体翻修同期植入限制性内衬安全,高孔隙度髋臼杯未见固定失败。
核心结论
- 在固定稳定的髋臼假体翻修同期植入限制性内衬是安全的,髋臼假体固定失败风险很低。
- 高孔隙度髋臼杯未出现髋臼假体固定失败。
研究设计与样本
- 回顾性识别2001至2021年在本院行全髋关节翻修、且同期植入限制性内衬与髋臼假体翻修的病例,共纳入174例翻修。
- 平均随访8.7年(范围2至21.7年),平均年龄70岁,女性占60.9%。
- 骨缺损Paprosky I型占10%、IIA-C型占68.4%、IIIA-B型占21.3%。
- 初次髋臼翻修主要指征为不稳定(35%)、二期再植入(26.4%)和松动(17.2%)。
- 仅25%的翻修使用了现代高孔隙度翻修髋臼杯;三分之二的限制性内衬由一家植入物公司制造,三分之一由另一家制造;骨水泥型限制性内衬23例(13%);评估了螺钉固定。
主要发现
- 32例(18.3%)患者接受再翻修,平均再翻修时间2.9年(范围0.1至14.1年)。
- 再翻修最常见原因为不稳定(14例)。
- 3例(1.7%)因髋臼假体固定失败需再翻修。
- 因固定失败再翻修的髋臼假体生存率5年为98.9%、10年为98.1%。
- 全因再翻修生存率5年为84.9%、10年为79.9%。
关键数值与推荐
- 因固定失败再翻修的髋臼假体生存率:5年98.9%,10年98.1%。
- 全因再翻修生存率:5年84.9%,10年79.9%。
- 再翻修32例(18.3%),其中因髋臼假体固定失败再翻修3例(1.7%)。
- 再翻修最常见原因为不稳定,共14例。
临床怎么用
- 作者认为,在固定稳定的髋臼假体翻修同期植入限制性内衬是安全的,髋臼假体固定失败风险很低。
- 原文报告高孔隙度髋臼杯未出现髋臼假体固定失败。
局限性
- 原文为回顾性研究。
- 仅25%的翻修使用了现代高孔隙度翻修髋臼杯。
- 三分之二的限制性内衬由一家植入物公司制造,三分之一由另一家制造。
- 原文未报告其他局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: There remains concern regarding simultaneous constrained liner (CL) implantation during acetabular component revision in revision total hip arthroplasty due to potential fixation loss at the bone-implant interface. There are scarce long-term data on this technique. This study aimed to determine the survivorship free from aseptic cup loosening (fixation failure) and all-cause re-revision when CLs were implanted concurrently with acetabular cup revision. METHODS: We retrospectively identified all revision total hip arthroplasties where CLs were implanted simultaneously with acetabular cup revision at our institution between 2001 and 2021. We included 174 revisions with a mean follow-up of 8.7 years (range, 2 to 21.7). The mean age was 70 years, and 60.9% were women. There were 10% that had Paprosky type I bone loss, 68.4% had type IIA-C, and 21.3% had type IIIA-B. The main indications for index acetabular revision were instability (35%), second-stage reimplantation (26.4%), and loosening (17.2%). Only 25% of revisions used modern, highly porous revision shells. There were two-thirds of the CLs manufactured by one implant company and one-third by another. There were 23 (13%) cemented CLs. Screw fixation was evaluated. Kaplan-Meier survival was determined with revision for cup aseptic loosening and all-cause re-revision as endpoints. RESULTS: There were 32 (18.3%) patients who underwent re-revision at a mean of 2.9 years (range, 0.1 to 14.1). The most common reason for re-revision was instability (14). There were three (1.7%) that required re-revision for acetabular component fixation failure. Acetabular component survival free from re-revision due to fixation failure was 98.9% at 5 years and 98.1% at 10 years. The all-cause re-revision-free survival was 84.9% at 5 years and 79.9% at 10 years. CONCLUSIONS: Implanting CLs during acetabular component revision with stable fixation is safe with a very low risk of cup fixation failure. There were no cup fixation failures in highly porous shells.
引用
- AlFayyadh FM, Howard LC, Masri BA, et al. Low Risk of Cup Fixation Failure at 10 Years Using Constrained Liners at the Same Time of Acetabular Component Revision. J Arthroplasty. 2025. PMID: 40480327. doi:10.1016/j.arth.2025.05.094
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。