聚合物基环扎缆与不锈钢缆在处理峡部假体周围股骨骨折中效果相当:一项生物力学比较
该生物力学研究使用20根新鲜冷冻人尸体股骨(10对匹配)模拟全髋关节置换翻修术中峡部假体周围股骨骨折,比较不锈钢缆与聚合物基环扎缆固定后的力学稳定性。结果显示在500 N循环疲劳加载、逐步加载至2600 N及失败测试中,两组股骨柄下沉和骨折移位均无显著差异。结论认为聚合物基环扎缆提供与金属缆等效的生物力学稳定性,可能减少金属缆相关风险,但需进一步研究评估长期结局。
要点
- 在500 N循环疲劳加载下,不锈钢组与聚合物组股骨柄下沉(P=0.19)和骨折移位(P=0.14)无差异。
- 逐步加载至2600 N时,两组下沉(P=0.23)和垂直骨折移位(P=0.22)相似。
- 失败测试中,两组导致下沉大于10 mm所需力和骨折移位所需力均相似(P=0.27和P=0.22)。
核心结论
- 聚合物基环扎缆在处理全髋关节置换翻修术中峡部假体周围股骨骨折时提供与金属缆等效的生物力学稳定性。
- 聚合物基环扎缆可能减少与金属缆相关的腐蚀和损伤等风险。
- 需进一步研究评估长期结局。
研究设计与样本
- 生物力学研究,使用20根新鲜冷冻人尸体股骨(10对匹配)。
- 股骨分为不锈钢缆组和聚合物基缆组,每组每根股骨截骨模拟峡部骨折后使用三根环扎缆固定。
- 标本接受循环加载、逐步加载和失败加载,轴向测试使用伺服液压材料测试系统,主要结局为股骨柄下沉和垂直骨折移位。
主要发现
- 在500 N力循环疲劳加载下,两组下沉(P=0.19)和骨折移位(P=0.14)无差异。
- 逐步加载至2600 N时,两组下沉(P=0.23)和垂直骨折移位(P=0.22)相似。
- 失败测试中,两组导致下沉大于10 mm所需力(P=0.27)和导致骨折移位所需力(P=0.22)相似。
临床怎么用
- 原文未据此给出推荐。
局限性
- 需进一步研究评估长期结局。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Periprosthetic femoral fractures (PPFs) following total hip arthroplasty (THA) are challenging complications, and as THA is increasingly performed in younger, more active populations, the incidence of PPFs is expected to rise. Treatment often requires tapered titanium stems to provide axial and rotational stability, and cerclage fixation is commonly used. Traditional metallic cerclage cables are effective, but carry risks such as fretting, corrosion, and intraoperative injury. Polymer-based cerclage cables have emerged as an alternative, though biomechanical data comparing them to metallic cables is limited. This study aimed to compare the strength of metal versus polymer-based cerclage cables in the treatment of isthmic PPFs during revision THA with a tapered titanium stem. METHODS: A biomechanical study was performed using 20 fresh-frozen human cadaver femora (10 matched pairs). Femora were divided into two groups: one using stainless steel cables (stainless steel group) and the other using polymer-based cables (polymer group). The femora were osteotomized to simulate isthmic fractures and fixed with three cerclage cables per femur. The specimens underwent cyclic loading, stepwise loading, and loading to failure. Axial testing was performed using a servohydraulic material testing system, and primary outcomes included stem subsidence and vertical fracture displacement. RESULTS: Under cyclic fatigue loading at a 500 N force, there were no differences in subsidence (P = 0.19) or fracture displacement (P = 0.14) between the groups. Under stepwise loading to 2,600 N, subsidence (P = 0.23) and vertical fracture displacement (P = 0.22) were similar across both groups. When tested to failure, both groups also demonstrated similar forces required to cause subsidence greater than 10 mm (P = 0.27) and fracture displacement (P = 0.22). CONCLUSIONS: Polymer-based cerclage cables provide biomechanical stability equivalent to metallic cables in the treatment of isthmic PPFs during revision THA and may reduce risks, such as corrosion and injury, associated with metallic cables. Further studies are needed to assess long-term outcomes.
引用
- Anatone AJ, Flevas DA, Sokrab R, et al. Polymer-Based Cerclage Cables Are Equivalent to Stainless Steel Cables in Management of Peri-Isthmic Periprosthetic Femoral Fractures: A Biomechanical Comparison. J Arthroplasty. 2025. PMID: 40403890. doi:10.1016/j.arth.2025.05.040
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。