分期双侧全髋关节置换术中匹配对侧:探究分期双侧全髋关节置换术中的影像学变异
该回顾性研究纳入2017年6月至2022年11月间接受分期双侧全髋关节置换术的207例患者,评估两侧假体位置的影像学变异及其对患者报告结局的影响。结果显示两侧假体位置存在可观变异,直接前入路较后入路导致更多股骨假体对线变异,计算机导航和机器人并未提高位置一致性,假体位置变异与患者报告结局无关。
要点
- 分期双侧全髋关节置换术两侧假体位置存在可观变异,但患者报告结局未受影响。
- 直接前入路较后入路导致更多股骨假体冠状面和矢状面对线变异。
- 计算机导航和机器人并未提高双侧全髋关节置换术假体位置的一致性。
核心结论
- 分期双侧全髋关节置换术导致两侧假体位置存在可观变异,但假体位置变异与患者报告结局差异无关,表明患者可以耐受这些差异。
研究设计与样本
- 回顾性综述纳入2017年6月至2022年11月间接受分期双侧全髋关节置换术的207例患者,影像学评估腿长、髋臼假体高度和前倾角、股骨假体冠状面和矢状面角度,并与对侧全髋关节置换术比较,同时评估手术入路和技术对该变异的影响,采用线性回归探究两次全髋关节置换术间的变异与患者报告结局的关系。
主要发现
- 两侧之间平均腿长变异4.6 mm(0.0至21.2),平均髋臼假体高度变异3.3 mm(0.0至13.7),平均前倾角变异8.2°(0.0°至28.7°),平均股骨假体冠状面对线变异1.1°(0.0°至6.9°),平均矢状面对线变异2.3°(0.0°至10.5°)。
- 与后入路相比,直接前入路导致股骨假体冠状面(1.3° vs 1.0°;p = 0.036)和矢状面(2.8° vs 2.0°;p = 0.012)对线变异显著更多。
- 后入路通常导致髋臼假体前倾角大于前入路。
- 使用机器人或导航定位髋臼假体并未增加髋臼假体相关位置或腿长的两侧变异。
- 尽管存在可观的两侧变异,平均髋关节功能障碍和骨关节炎结局、关节置换(HOOS JR)评分未受假体位置变异影响。
关键数值与推荐
- 直接前入路组股骨假体冠状面对线变异1.3° vs 后入路组1.0°(p = 0.036)。
- 直接前入路组股骨假体矢状面对线变异2.8° vs 后入路组2.0°(p = 0.012)。
临床怎么用
- 原文未据此给出推荐。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
AIMS: The aim of this study was to assess the variations in the positioning of components between sides in patients who underwent staged bilateral total hip arthroplasty (THA), and whether these variations affected patient-reported outcome measures (PROMs). METHODS: A retrospective review included 207 patients who underwent staged bilateral THA between June 2017 and November 2022. Leg length, the height and anteversion of the acetabular component, and the coronal and sagittal angles of the femoral component were assessed radiologically and compared with the contralateral THA. The effect of the surgical approach and the technology used on this variation was also assessed. Linear regression was used to investigate the variations between the two THAs and the PROMs. RESULTS: Between the two sides, the mean leg length varied by 4.6 mm (0.0 to 21.2), the mean height of the acetabular component varied by 3.3 mm (0.0 to 13.7), the mean anteversion varied by 8.2° (0.0° to 28.7°), the mean coronal alignment of the femoral component varied by 1.1° (0.0° to 6.9°), and the mean sagittal alignment varied by 2.3° (0.0° to 10.5°). The use of the direct anterior approach resulted in significantly more variation in the alignment of the femoral component in both the coronal (1.3° vs 1.0°; p = 0.036) and sagittal planes (2.8° vs 2.0°; p = 0.012) compared with the use of the posterior approach. The posterior approach generally led to more anteversion of the acetabular component than the anterior approach. The use of robotics or navigation for positioning the acetabular compoment did not increase side-to-side variations in acetabular component-related positioning or leg length. Despite considerable side-to-side variations, the mean Hip disability and Osteoarthritis Outcome, Joint Replacement (HOOS JR) score was not affected by variations in the postioning of the components. CONCLUSION: Staged bilateral THA resulted in considerable variation in the positioning of the components between the two sides. The direct anterior approach led to more variations in anteversion of the acetabular component and sagittal alignment of the femoral component than the posterior approach. The use of computer navigation and robotics did not improve the consistency of the positioning of the components in bilateral THA. Variations in the positioning of the components was not associated with differences in PROMs, indicating that patients can tolerate these differences.
引用
- Schaffler BC, Robin JX, Katzman JL, et al. Matching the other side at staged bilateral total hip arthroplasty : investigating radiological variations in staged bilateral total hip arthroplasty. Bone Joint J. 2025. PMID: 40306651. doi:10.1302/0301-620X.107B5.BJJ-2024-0880.R2
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。