文献速递关节外科

初次全髋关节置换术中是否应在最小髋臼杯内使用最大股骨头

Should We Use the Largest Femoral Head With the Smallest Acetabular Component in Primary Total Hip Arthroplasty?
PubMed 文献 · J Arthroplasty · 2025-05-27

本研究回顾了2005年至2021年间1860例采用高交联聚乙烯内衬的后路初次全髋关节置换术,按髋臼假体过渡点分为三组,比较在最小兼容髋臼杯中使用最大股骨头与使用较小股骨头的生存率及脱位风险。结果显示,在32mm、36mm和40mm股骨头中,将最大股骨头与最小兼容髋臼杯配对并未增加内衬相关并发症、翻修或再手术风险;使用较大股骨头在过渡杯尺寸下脱位风险无差异,但本研究检验效能不足以检出该差异。

要点

  • 在最小兼容髋臼杯中使用最大股骨头未增加内衬相关并发症、翻修或再手术风险。
  • 三组中不同股骨头尺寸间的再手术率或翻修率均无差异。
  • 较大股骨头在过渡杯尺寸下脱位风险无差异,但研究检验效能不足。

核心结论

  • 在采用高交联聚乙烯内衬时,将最大股骨头与最小兼容髋臼杯配对用于32mm、36mm和40mm股骨头,未增加内衬相关并发症、翻修或再手术风险。
  • 在过渡杯尺寸下使用较大股骨头时脱位风险无差异,但本研究检验效能不足以检出该差异。

研究设计与样本

  • 回顾性对比队列研究(证据等级III),纳入2005年至2021年间1860例后路初次全髋关节置换术,均使用高交联聚乙烯内衬。
  • 按髋臼假体过渡点分为三组:第1组为28mm(N=18)对比32mm(N=89)股骨头,第2组为32mm(N=383)对比36mm(N=429)股骨头,第3组为36mm(N=806)对比40mm(N=135)股骨头。
  • 平均年龄66岁,75%为女性,平均体重指数30,48%为陶瓷头、52%为金属头,平均随访7年。

主要发现

  • 共发生2例内衬脱位(0.1%),无内衬骨折。
  • 无脱位、无翻修和无再手术的10年生存率分别为95%、95%和93%。
  • 第1组无脱位5年生存率:28mm股骨头为94%,32mm股骨头为99%。
  • 第2组无脱位5年生存率:32mm股骨头为96%,36mm股骨头为99%。
  • 第3组无脱位5年生存率:36mm股骨头为96%,40mm股骨头为95%;Cox回归显示各组内不同股骨头尺寸间再手术率或翻修率均无差异。

局限性

  • 本研究为回顾性对比队列研究(证据等级III)。
  • 本研究检验效能不足以检出较大股骨头在过渡杯尺寸下脱位风险的差异。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: There has been an increasing use of larger femoral head sizes to mitigate dislocation risk after total hip arthroplasty. Manufacturers have created thinner, highly cross-linked polyethylene (HXLPE) liners to maximize effective head size. We investigated whether there was a survivorship penalty if the largest head was chosen at the smallest compatible acetabular component size, and as a secondary aim, we analyzed whether there was a decreased dislocation risk. METHODS: We reviewed 1,860 posterior approach primary total hip arthroplasties with HXLPE from 2005 to 2021. Subjects were divided into three groups based on acetabular component transition points at which a larger femoral head could be used: group 1 was 28-mm (N = 18) versus 32-mm (N = 89) heads, group 2 was 32-mm (N = 383) versus 36-mm (N = 429) heads, and group 3 was 36-mm (N = 806) versus 40-mm (N = 135) heads. The mean age was 66 years, 75% were women, and the mean body mass index was 30. There were 48% that had ceramic heads, and 52% had metal heads. The mean follow-up was 7 years. RESULTS: There were two liner dissociations (0.1%) and no liner fractures. The 10-year survivorships free of dislocation, revision, and reoperation were 95, 95, and 93%, respectively. The 5-year survivorship free of dislocation for group 1 was 94% for 28-mm and 99% for 32-mm heads; for group 2, 96% for 32-mm and 99% for 36-mm heads; and for group 3, 96% for 36-mm and 95% for 40-mm heads. Cox regression demonstrated no difference in reoperation or revision rates between head sizes in any group. CONCLUSIONS: When using HXLPE liners, pairing the largest femoral head with the smallest compatible cup for 32-mm, 36-mm, and 40-mm heads did not increase risk for liner-related complications, revisions, or reoperations. There was no difference in dislocation risk when using the larger femoral head at transitional cup sizes, though this study was under-powered to detect this difference. LEVEL OF EVIDENCE: III, retrospective comparative cohort study.

来源:J Arthroplasty,查看原文。版权归原作者所有。

引用

  1. Wu M, Bukowski BR, Fruth KM, et al. Should We Use the Largest Femoral Head With the Smallest Acetabular Component in Primary Total Hip Arthroplasty? J Arthroplasty. 2025. PMID: 40441317. doi:10.1016/j.arth.2025.05.078

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。