文献速递关节外科

全髋关节置换术中的自动撞击器:最新综述

Automatic Impactors in Total Hip Arthroplasty: A State-of-the-Art Review.
PubMed 文献 · J Arthroplasty · 2025-05-06

该综述评估了4种市售自动撞击器的规格、临床应用、人体工效学益处和职业危害,并与现有文献比较及补充独立噪声测量。自动撞击器可缩短股骨扩髓时间、提高一致性并减轻外科医生疲劳,假体周围骨折风险等于或低于手动操作。各设备噪声水平相近,接近世界卫生组织最大阈值。

要点

  • 自动撞击器可缩短股骨扩髓时间、提高一致性并减轻外科医生疲劳。
  • 假体周围骨折风险等于或低于手动扩髓。
  • 各设备时间加权平均噪声57.37至67.47 dBA,最大值101.2至107.3 dBA。

核心结论

  • 自动撞击器可提高全髋关节置换术的手术效率和人体工效学,但设备选择应针对具体手术和机构需求。
  • 各设备噪声水平相近,但接近世界卫生组织最大阈值。
  • 未来研究应关注长期患者结局和标准化这些设备的测试方案。

研究设计与样本

  • 系统PubMed检索(2013年至2024年),排除撞击植骨和创伤研究后纳入147篇相关文章。
  • 产品规格和噪声数据补充以专利信息和制造商详情。
  • 对3种讨论的撞击器测量了声级以补充综述。

主要发现

  • 与手动方法相比,自动撞击器显著缩短股骨扩髓时间、提高一致性并减轻外科医生疲劳。
  • 假体周围骨折风险等于或低于手动扩髓。
  • 各撞击器展现独特优势:KINCISE多功能性、Woodpecker精确性、HAMMR可调性、orthodrive在测量设备中噪声最低。
  • 各设备时间加权平均噪声水平为57.37至67.47 dBA,最大值为101.2至107.3 dBA。
  • 噪声水平低于职业安全与健康管理局时间加权平均阈值85 dBA和世界卫生组织最大阈值110 dBA。

临床怎么用

  • 设备选择应针对具体手术和机构需求。

局限性

  • 未来研究应关注长期患者结局和标准化这些设备的测试方案。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Total hip arthroplasty places considerable physical strain on orthopaedic surgeons over time and requires precise impaction for optimal implant fixation. Automated impactors have emerged as innovative tools to address the limitations of mallets, with efforts to improve the surgeon's physical health, efficiency, and patient outcomes. This review evaluated the specifications, clinical applications, ergonomic benefits, and occupational hazards of 4 commercially available automated impactors. This was compared to existing literature on the devices and supplemented with independent noise measurements. METHODS: A systematic PubMed search (from 2013 to 2024) identified 147 relevant articles after excluding studies on impaction grafting and trauma. Product specifications and noise data were supplemented with patent information and manufacturer details. Noise mitigation strategies and ergonomic considerations were also explored. Sound levels of 3 of the discussed impactors were measured to supplement this review. RESULTS: Automated impactors demonstrated significant reductions in femoral broaching time, improved consistency, and reduced surgeon fatigue compared to manual methods. Periprosthetic fracture risk was equal to or less than that of manual broaching. Each impactor exhibited unique strengths-KINCISE offered versatility, Woodpecker precision, HAMMR adjustability, and orthodrive the lowest noise production among the devices measured. Time-weighted average noise levels ranged from 57.37 to 67.47 dBA across devices, with maximum levels ranging from 101.2 to 107.3 dBA, remaining below the Occupational Safety and Health Administration time-weighted average threshold of 85 dBA and the World Health Organization maximum threshold of 110 dBA. CONCLUSIONS: Automated impactors enhance procedural efficiency and ergonomics in total hip arthroplasty, but device selection should be tailored to specific surgical and institutional needs. Noise levels were similar across devices, though close to the World Health Organization maximum threshold. Future research should focus on long-term patient outcomes and standardizing testing protocols for these devices.

来源:J Arthroplasty,查看原文。版权归原作者所有。

引用

  1. Kutzer KM, Deckey DG, Florance JM, et al. Automatic Impactors in Total Hip Arthroplasty: A State-of-the-Art Review. J Arthroplasty. 2025. PMID: 40339939. doi:10.1016/j.arth.2025.04.077

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。