机器人辅助与手动全膝关节置换术达到最小临床重要差异的时间比较分析
该回顾性研究分析726例全膝关节置换术(416例机器人辅助,310例手动),比较两种术式达到最小临床重要差异(MCID)的时间。不考虑区间删失时,机器人辅助在PROMIS整体生理和KOOS-PS上达到MCID的中位时间显著更短,但考虑区间删失后两组达到MCID的时间无显著差异。作者认为达到MCID的中位时间不因手术技术而异,需进一步前瞻性研究评估机器人辅助关节置换术的真实有效性。
要点
- 不考虑区间删失时,机器人辅助全膝关节置换术在PROMIS整体生理和KOOS-PS上达到MCID的中位时间显著短于手动全膝关节置换术。
- 考虑区间删失后,机器人辅助与手动全膝关节置换术在各患者报告结局指标上达到MCID的时间均无显著差异。
- 作者认为达到MCID的中位时间不因手术技术而异,需进一步前瞻性研究评估机器人辅助关节置换术的真实有效性。
核心结论
- 采用达到MCID时间的方法学,达到MCID的中位时间不因手术技术(机器人辅助与手动全膝关节置换术)而异。
- 本研究为术前期望管理和患者教育提供了以患者为中心的宝贵见解。
- 需要进一步的前瞻性研究,采用更精细的患者报告结局测量收集,以评估机器人辅助关节置换术的真实有效性。
研究设计与样本
- 回顾性分析2019年至2022年间实施的726例全膝关节置换术,其中机器人辅助416例、手动310例。
- 采用PROMIS整体生理、PROMIS身体功能-10a(PF-10a)和膝关节损伤与骨关节炎结局评分-身体功能简表(KOOS-PS)在术前和术后评估患者报告结局。
- 利用考虑区间删失的生存曲线评估达到MCID的时间,组间比较采用对数秩检验和加权对数秩检验。
主要发现
- 不考虑区间删失时,机器人辅助组达到MCID的中位时间在PROMIS整体生理上为3.5个月,手动组为3.7个月(P=0.032),机器人辅助组显著更短。
- 不考虑区间删失时,机器人辅助组达到MCID的中位时间在KOOS-PS上为3.7个月,手动组为5.3个月(P=0.002),机器人辅助组显著更短。
- 不考虑区间删失时,机器人辅助组与手动组达到MCID的中位时间在PROMIS PF-10a上分别为6.0个月与6.7个月(P=0.16),无显著差异。
- 考虑区间删失时,机器人辅助组与手动组达到MCID的时间在PROMIS整体生理上分别为0.53至0.54个月与1.23至1.24个月(P=0.31),无显著差异。
- 考虑区间删失时,机器人辅助组与手动组达到MCID的时间在PROMIS PF-10a上分别为3.03至3.03个月与2.17至2.17个月(P=0.89),在KOOS-PS上分别为1.47至1.47个月与2.17至2.17个月(P=0.27),均无显著差异。
临床怎么用
- 研究未据此给出临床推荐。
局限性
- 原文未报告局限性。
- 原文结论指出需要进一步的前瞻性研究,采用更精细的患者报告结局测量收集,以评估机器人辅助关节置换术的真实有效性。
- 证据等级为III级,回顾性比较研究。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Robotics in arthroplasty remains controversial due to the uncertainty of clinical outcomes in robotic total knee arthroplasty (rTKA). This study aimed to compare the time to achieve the minimal clinically important difference (MCID) between rTKA and manual TKA (mTKA). METHODS: A total of 726 TKAs (416 robotic and 310 manual) were analyzed. We conducted a retrospective analysis of 726 TKAs performed between 2019 and 2022. Patient-reported outcomes were assessed using the Patient-Reported Outcomes Measurement Information System (PROMIS) global physical, PROMIS physical function-10a (PF-10a), and Knee Injury and Osteoarthritis Outcome Score-physical function short-form (KOOS-PS) scores, both preoperatively and postoperatively. Survival curves, accounting for interval censoring, were utilized to evaluate the time to achieve MCID. Statistical comparisons between groups were made using log-rank and weighted log-rank tests. RESULTS: Comparing time to achieve MCID without interval censoring, the median time for rTKA was significantly lower than mTKA for PROMIS global physical (3.5 versus 3.7 months, P = 0.032) and KOOS-PS (3.7 versus 5.3 months, P = 0.002) but similar for PROMIS PF-10a (6.0 versus 6.7 months, P = 0.16). Notably, interval censoring showed similar times to achieve MCID for rTKA and mTKA in PROMIS global physical (0.53 to 0.54 versus 1.23 to 1.24 months, P = 0.31), PROMIS PF-10a (3.03 to 3.03 versus 2.17 to 2.17 months, P = 0.89), and KOOS-PS (1.47 to 1.47 versus 2.17 to 2.17 months, P = 0.27). CONCUSIONS: Using time to MCID methodology, the median time to achieve MCID did not differ by surgical technique. The present study offers valuable patient-centric insights into preoperative expectations management and patient education. Further prospective studies with more granular patient-reported outcomes measurement collection are needed to evaluate the true effectiveness of robotics in arthroplasty. LEVEL OF EVIDENCE: Level III, retrospective comparative study.
引用
- Lim PL, Sayeed Z, Gonzalez MR, et al. Time to Achieve Minimal Clinically Important Difference (MCID) in Robotic Versus Manual Total Knee Arthroplasty: A Comparative Analysis. J Arthroplasty. 2025. PMID: 39956487. doi:10.1016/j.arth.2025.02.031
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。