文献速递创伤骨科关节外科

三维骨折评估或可预测髋臼骨折非手术治疗后自体髋关节生存率

3D fracture assessment could be predictive of native hip survival after nonoperative treatment of acetabular fractures.
PubMed 文献 · Bone Joint J · 2025-02-01

该多中心横断面研究纳入144例2000年1月至2020年12月在四家一级创伤中心接受非手术治疗的髋臼骨折患者,基于CT三维模型测量骨折移位(三维间隙面积)。随访期间18例(12%)转为全髋关节置换术(THA)。三维间隙面积>1,171 mm²(HR 4.3;95%CI 1.7至11.0)和骨关节炎分级≥2级(HR 3.1;95%CI 1.2至7.8)独立预测THA转换。作者认为三维间隙面积评估有望作为Letournel分型的补充和传统二维间隙与台阶测量的替代方法。

要点

  • 三维间隙面积>1,171 mm²者自体髋关节生存率在1年、2年、5年随访时分别为85%、77%、73%,≤1,171 mm²者为98%、96%、92%。
  • 三维间隙面积>1,171 mm²(HR 4.3;95%CI 1.7至11.0)和骨关节炎分级≥2级(HR 3.1;95%CI 1.2至7.8)独立预测THA转换。
  • 作者认为三维间隙面积测量可作为Letournel分型的补充和传统二维间隙与台阶测量的替代方法。

核心结论

  • 对于非手术治疗的髋臼骨折,引入三维间隙面积评估测量骨折移位为评估THA转换风险提供了有前景的方法。
  • 随着(半)自动分割与测量技术的引入或将其整合到商用软件中,该三维间隙面积测量可作为Letournel分型的补充和传统二维间隙与台阶测量的替代方法,提高临床决策的准确性、可重复性和适用性。

研究设计与样本

  • 多中心横断面研究,纳入2000年1月至2020年12月在四家一级创伤中心接受非手术治疗的144例髋臼骨折患者。
  • 基于CT三维模型测量骨折移位,三维间隙面积表示所有骨折块之间的骨折移位(mm²)。
  • 采用受试者工作特征曲线确定预测THA转换的最佳敏感度和特异度对应的三维间隙面积阈值。
  • 采用Kaplan-Meier曲线报告自体髋关节生存率,采用Cox回归分析确定THA转换的预测因素。

主要发现

  • 144例患者中18例(12%)接受了THA。
  • 整个研究队列的三维间隙面积中位数为692 mm²(IQR 216至1,400)。
  • 三维间隙面积≤1,171 mm²与>1,171 mm²的患者自体髋关节生存率在1年随访时分别为98%与85%,2年随访时分别为96%与77%,5年随访时分别为92%与73%。
  • 三维间隙面积>1,171 mm²(HR 4.3;95%CI 1.7至11.0)和骨关节炎分级≥2级(HR 3.1;95%CI 1.2至7.8)独立预测随访期间THA转换的可能性。

关键数值与推荐

  • 三维间隙面积阈值1,171 mm²用于区分自体髋关节生存率。
  • 三维间隙面积>1,171 mm²的THA转换风险HR 4.3(95%CI 1.7至11.0)。
  • 骨关节炎分级≥2级的THA转换风险HR 3.1(95%CI 1.2至7.8)。

临床怎么用

  • 原文未据此给出推荐。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

AIMS: The aim of the study was to apply 3D measurements for fracture displacement in minimally to moderately displaced acetabular fractures treated nonoperatively, and to evaluate whether this measurement can be used to estimate the likelihood of conversion to total hip arthroplasty (THA) at follow-up. METHODS: A multicentre, cross-sectional study was performed on 144 patients who were treated nonoperatively for an acetabular fracture in four level 1 trauma centres between January 2000 and December 2020. For each patient, fracture displacement was measured on CT-based 3D models. The 3D gap area represents fracture displacement (mm2) between all fracture fragments. A receiver operating characteristic curve was generated to determine a 3D gap area threshold representing the optimal sensitivity and specificity to predict conversion to THA. Native hip survival was reported using Kaplan-Meier curves. Predictors of conversion to THA were determined using Cox regression analysis. RESULTS: Of 144 patients, 18 (12%) received a THA. The median 3D gap area of the complete study cohort was 692 mm2 (IQR 216 to 1,400). Native hip survival in patients with a gap area threshold ≤ 1,171 or > 1,171 mm2 differed at one-year (98% vs 85%), two-year (96% vs 77%), and five-year follow-up (92% vs 73%). 3D gap area > 1,171 mm2 (hazard ratio (HR) 4.3; 95% CI 1.7 to 11.0) and the presence of osteoarthritis grade 2 or higher (HR 3.1; 95% CI 1.2 to 7.8) independently predicted the likelihood of conversion to THA during follow-up. CONCLUSION: For nonoperatively treated acetabular fractures, introducing 3D gap area assessment to measure fracture displacement offers a promising approach for assessing the risk of conversion to THA. With the introduction of (semi-)automatic segmentation and measurement techniques, or their implementation into commercially available software, this 3D gap area measurement can serve as an addition to the Letournel classification and an alternative to traditional 2D gap and step-off measurements, improving accuracy, reproducibility, and applicability in clinical decision-making.

来源:Bone Joint J,查看原文。版权归原作者所有。

引用

  1. Trouwborst NM, Oldhoff MGE, Ten Duis K, et al. 3D fracture assessment could be predictive of native hip survival after nonoperative treatment of acetabular fractures. Bone Joint J. 2025. PMID: 39889745. doi:10.1302/0301-620X.107B2.BJJ-2024-0390.R1

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。