文献速递运动医学骨质疏松与代谢性骨病

壳聚糖季铵盐涂层镍钛记忆合金锚钉增强骨质疏松兔肩袖修复

Enhancing Rotator Cuff Repair in Rabbit Osteoporosis With Chitosan Quaternary Ammonium Salt-Coated Nickel-Titanium Memory Alloy Anchors.
PubMed 文献 · Am J Sports Med · 2025-01-03

在兔骨质疏松模型中,研究壳聚糖季铵盐涂层镍钛记忆合金(NTMA)锚钉修复肩袖损伤的效果;涂层NTMA锚钉组在各时间点最大失败载荷最高,组织学显示骨小梁厚度大于其他组,提示该锚钉可增强固定强度并促进局部成骨。

要点

  • 在骨质疏松骨模型中,NTMA锚钉在45°和90°牵引力下失败载荷大于钛锚钉(P < .05)。
  • 涂层NTMA锚钉组在各时间点最大失败载荷最高。
  • 术后6和12周涂层NTMA锚钉组骨小梁厚度大于其他组。

核心结论

  • 壳聚糖季铵盐涂层NTMA锚钉在骨质疏松肩袖修复中增强了固定强度并促进局部成骨,提示使用这些锚钉有助于骨质疏松骨中的骨质疏松性肩袖损伤修复。

研究设计与样本

  • 对照实验室研究,在体外正常和骨质疏松骨模型中测试新型带翼NTMA锚钉,并在卵巢切除联合糖皮质激素诱导的骨质疏松兔肩袖急性损伤模型中比较钛合金锚钉、NTMA锚钉和涂层NTMA锚钉。

主要发现

  • 在骨质疏松骨模型中,NTMA锚钉在45°和90°牵引力下失败载荷大于钛锚钉(P < .05)。
  • 表面改性材料接触角低于未改性材料,CCK-8实验显示复合涂层促进成骨细胞增殖。
  • 涂层NTMA锚钉组在各时间点最大失败载荷最高,术后6和12周苏木精-伊红染色显示该组骨小梁厚度大于其他组。
  • 术后12周显微CT显示NTMA锚钉组骨小梁数量和厚度增加,骨小梁间隙增宽(P < .05),NTMA锚钉双平面展开后双平面与锚钉间隙可见骨组织生长。

临床怎么用

  • 原文未据此给出推荐。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: For patients with osteoporosis and rotator cuff tears, there is still no consensus on current treatment methods. The material, structure, and number of anchors have important effects on the repair outcome. PURPOSE: To investigate the use of chitosan quaternary ammonium salt-coated nickel-titanium memory alloy (NTMA) anchors to treat rotator cuff injury in shoulders with osteoporosis in a rabbit osteoporosis model. STUDY DESIGN: Controlled laboratory study. METHODS: A novel winged NTMA anchor was designed to test in normal and osteoporotic bone models in vitro. These models were assessed for maximum failure load and bone damage in various traction directions. A chitosan-sodium alginate composite was coated onto NTMA anchor surfaces using glutaraldehyde cross-linking and electrostatic layering techniques. An osteoporotic rabbit model was created using ovariectomy combined with glucocorticoid treatment. A rabbit model with acute injury to the supraspinatus muscle was established and repaired using titanium alloy anchors, NTMA anchors, and coated NTMA (CNTMA) anchors. To evaluate the efficacy of the anchors, biomechanical testing and staining with hematoxylin and eosin were performed 6 and 12 weeks after surgery. A micro-computed tomography scan was performed 12 weeks after surgery. RESULTS: In the osteoporotic bone model, NTMA anchors exhibited greater failure loads than titanium anchors under 45° and 90° traction forces (P < .05). The surface-modified material showed a lower contact angle compared with unmodified material. Cell Counting Kit-8 (CCK-8) assays showed that the composite coating promoted osteoblast proliferation. The CNTMA anchor group exhibited the greatest maximum failure load at each time point. Hematoxylin and eosin staining revealed greater trabecular thickness in the CNTMA anchor group than in the other groups at 6 and 12 weeks after surgery. At 12 weeks after surgery, micro-computed tomography revealed an increased number and thickness of bone trabeculae in the NTMA anchor group, along with a widened trabecular gap (P < .05). After the NTMA anchor biplane unfolded, the gap between the biplane and anchor showed bone tissue growth. CONCLUSION: Chitosan quaternary ammonium salt-coated NTMA anchors enhanced fixation strength and promoted local osteogenesis during osteoporotic rotator cuff repair, suggesting that the use of these anchors facilitates the repair of osteoporotic rotator cuff injuries in osteoporotic bones. CLINICAL RELEVANCE: Innovations in anchor nailing may be effective in reducing rates of repair failure for rotator cuff tears combined with osteoporosis.

来源:Am J Sports Med,查看原文。版权归原作者所有。

引用

  1. Zhang M, Deng L, Zhang B, et al. Enhancing Rotator Cuff Repair in Rabbit Osteoporosis With Chitosan Quaternary Ammonium Salt-Coated Nickel-Titanium Memory Alloy Anchors. Am J Sports Med. 2025. PMID: 39748784. doi:10.1177/03635465241302101

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。