3D打印干骺端锥形套在翻修全膝关节置换术中的应用:740个锥形套5年优异存活率
本研究在单中心纳入533例翻修全膝关节置换术中植入的740个3D打印干骺端锥形套(胫骨498个、股骨242个),平均随访4年。5年因无菌性松动行锥形套翻修的累积发生率为1%(95%CI 0%至3%),任何锥形套翻修或取出的5年累积发生率为6%(95%CI 4%至9%),任何全膝关节置换再翻修的5年累积发生率为14%(95%CI 11%至18%)。假体周围感染是锥形套翻修和任何翻修最常见的原因。
要点
- 5年因无菌性松动行锥形套翻修的累积发生率为1%(95%CI 0%至3%)。
- 5年任何锥形套翻修或取出的累积发生率为6%(95%CI 4%至9%)。
- 假体周围感染是锥形套翻修和任何翻修最常见的原因。
核心结论
- 该大样本系列显示3D打印钛干骺端锥形套在短期随访中非常耐用,5年因无菌性松动行锥形套翻修的累积发生率为1%。
- 假体周围感染是锥形套翻修和任何翻修最常见的原因。
研究设计与样本
- 研究为治疗性IV级证据,在单一三级学术医疗中心纳入533例翻修全膝关节置换术中植入的740个锥形套(胫骨498个、股骨242个)。
- 翻修最常见原因为无菌性松动(n=199)、假体周围感染(n=183)和不稳定(n=84),67%的膝关节存在Type-2B或3型骨缺损。
- 患者平均年龄66岁,平均体重指数34 kg/m²,55%为女性,平均随访4年,系列X线片被回顾分析。
主要发现
- 5年因无菌性松动行锥形套翻修的累积发生率为1%(95%CI 0%至3%)。
- 5年任何锥形套翻修或取出的累积发生率为6%(95%CI 4%至9%)。
- 共37个锥形套(股骨19个、胫骨18个)被翻修,最常见原因为假体周围感染(n=23;其中14例复发)、假体周围股骨骨折(n=3)、关节纤维化(n=3)以及股骨假体和股骨锥形套无菌性松动(n=3)。
- 5年任何全膝关节置换再翻修的累积发生率为14%(95%CI 11%至18%),共67例再翻修,最常见原因为假体周围感染(n=38)、持续引流(n=6)和伸膝装置破坏(n=3)。
- 影像学上,2个未翻修的股骨锥形套和1个未翻修的胫骨锥形套可能松动,这3个锥形套均位于远端股骨置换或铰链式重建的膝关节中。
关键数值与推荐
- 5年因无菌性松动行锥形套翻修的累积发生率为1%(95%CI 0%至3%)。
- 5年任何锥形套翻修或取出的累积发生率为6%(95%CI 4%至9%)。
- 5年任何全膝关节置换再翻修的累积发生率为14%(95%CI 11%至18%)。
临床怎么用
- 原文未据此给出推荐。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Porous metaphyseal cones are frequently utilized during revision total knee arthroplasty (TKA) procedures. The purpose of the present study was to evaluate 3D-printed metaphyseal cones used for revision TKA, with specific emphasis on implant survivorship, radiographic appearance, and clinical outcomes after short-term follow-up. METHODS: We identified 740 cones (498 tibial, 242 femoral) that had been inserted during 533 revision TKA procedures that had been performed at a single tertiary care academic institution. Aseptic loosening (n = 199), periprosthetic joint infection (PJI) (n = 183), and instability (n = 84) were the most common reasons for the index revision. Type-2B or 3 bone loss was present in 67% of the knees. The mean age was 66 years, the mean body mass index was 34 kg/m 2 , and 55% of the patients were female. Serial radiographs were reviewed. The mean duration of follow-up was 4 years. RESULTS: The 5-year cumulative incidence of cone revision for aseptic loosening was 1% (95% confidence interval [CI], 0% to 3%). The 5-year cumulative incidence of any cone revision or removal was 6% (95% CI, 4% to 9%). In total, 37 cones (19 femoral, 18 tibial) were revised, with PJI (n = 23; 14 recurrent), periprosthetic femoral fracture (n = 3), arthrofibrosis (n = 3), and aseptic loosening of the femoral component and femoral cone (n = 3) as the most common reasons for cone revision. The 5-year cumulative incidence of any TKA re-revision was 14% (95% CI, 11% to 18%). There were a total of 67 re-revisions, with PJI (n = 38), persistent drainage (n = 6), and extensor mechanism disruption (n = 3) being the most common reasons. Radiographically, 2 unrevised femoral cones and 1 unrevised tibial cone appeared to be possibly loose; all 3 cones were in knees with distal femoral replacements or hinged constructs. CONCLUSIONS: This large series showed that 3D-printed titanium metaphyseal cones were very durable at short-term follow-up, with a 5-year cumulative incidence of cone revision for aseptic loosening of 1%. PJI was the most common reason for cone revision and any revision. LEVEL OF EVIDENCE: Therapeutic Level IV . See Instructions for Authors for a complete description of levels of evidence.
引用
- Carender CN, Bothun CE, Taunton MJ, et al. 3D-Printed Metaphyseal Cones in Revision Total Knee Arthroplasties: Excellent Survivorship of 740 Cones at 5 Years. J Bone Joint Surg Am. 2024. PMID: 38875316. doi:10.2106/JBJS.23.01196
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。