全髋关节置换术后高交联聚乙烯髋臼内衬更换治疗磨损与骨溶解
回顾性分析2000年8月至2015年1月在本机构行孤立性髋臼内衬更换为高交联聚乙烯(HXLPE)的86例患者,按固定方式分为原始锁定机制组(n=36)与骨水泥固定组(n=50)。两组再翻修率与无翻修生存率无显著差异,平均随访13年,两种固定技术均获得良好生存。
要点
- 骨水泥固定HXLPE内衬的髋臼内衬相关并发症再翻修率为8.0%(4/50),原始锁定机制为0%(0/36),p=0.082。
- 原始锁定机制因髋臼组件松动再翻修率为8.3%(3/36),骨水泥固定为0%(0/50),p=0.038。
- 10年无翻修生存率原始锁定机制94.1%、骨水泥固定93.2%,20年分别为84.7%和81.3%,p=0.840。
核心结论
- 使用HXLPE内衬行髋臼内衬更换翻修术后,再翻修率与无翻修生存率不受固定技术影响。
- 两种技术在平均13年随访中均获得良好生存。
- 为获得最佳结果,孤立性髋臼内衬更换翻修术需要仔细选择患者。
研究设计与样本
- 回顾性检索2000年8月至2015年1月在本机构行孤立性髋臼组件内衬更换为HXLPE组件的所有患者数据。
- 按固定方式分组:原始锁定机制组n=36,骨水泥固定组n=50,共86例翻修,平均随访13年。
- 比较两组生存率与翻修率。
主要发现
- 20例患者(23.3%)出现并发症,单纯脱位最常见,占8.1%(7/86)。
- 10例患者(11.6%)需要再翻修手术。
- 骨水泥固定HXLPE内衬因髋臼组件内衬相关并发症的再翻修发生率为8.0%(4/50),高于原始锁定机制的0%(0/36),p=0.082。
- 原始锁定机制固定因髋臼组件松动的再翻修为8.3%(3/36),骨水泥固定为0%(0/50),p=0.038。
- 总体估计平均生存期为19.2年。
关键数值与推荐
- 骨水泥固定HXLPE内衬的髋臼内衬相关并发症再翻修率为8.0%(4/50),原始锁定机制为0%(0/36),p=0.082。
- 原始锁定机制因髋臼组件松动的再翻修率为8.3%(3/36),骨水泥固定为0%(0/50),p=0.038。
- 原始锁定机制组再翻修率11.1%(4/36)与骨水泥固定组12.0%(6/50)比较,p=0.899。
- 10年无翻修生存率原始锁定机制94.1%、骨水泥固定93.2%;20年分别为84.7%和81.3%,p=0.840。
- 总体估计平均生存期为19.2年。
临床怎么用
- 原文结论指出,HXLPE内衬更换翻修术后的再翻修率与无翻修生存率不受固定技术影响,两种技术均与良好生存相关。
- 原文结论指出,为获得最佳结果,孤立性髋臼组件内衬更换翻修术需要仔细选择患者。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
AIMS: Isolated acetabular liner exchange with a highly crosslinked polyethylene (HXLPE) component is an option to address polyethylene wear and osteolysis following total hip arthroplasty (THA) in the presence of a well-fixed acetabular shell. The liner can be fixed either with the original locking mechanism or by being cemented within the acetabular component. Whether the method used for fixation of the HXLPE liner has any bearing on the long-term outcomes is still unclear. METHODS: Data were retrieved for all patients who underwent isolated acetabular component liner exchange surgery with a HXLPE component in our institute between August 2000 and January 2015. Patients were classified according to the fixation method used (original locking mechanism (n = 36) or cemented (n = 50)). Survival and revision rates were compared. A total of 86 revisions were performed and the mean duration of follow-up was 13 years. RESULTS: A total of 20 patients (23.3%) had complications, with dislocation alone being the most common (8.1%; 7/86). Ten patients (11.6%) required re-revision surgery. Cementing the HXLPE liner (8.0%; 4/50) had a higher incidence of re-revision due to acetabular component liner-related complications than using the original locking mechanism (0%; 0/36; p = 0.082). Fixation using the original locking mechanism was associated with re-revision due to acetabular component loosening (8.3%; 3/36), compared to cementing (0%; 0/50; p = 0.038). Overall estimated mean survival was 19.2 years. There was no significant difference in the re-revision rate between the original locking mechanism (11.1%; 4/36) and cementing (12.0%; 6/50; p = 0.899). Using Kaplan-Meier survival analysis, the revision-free survival of HXLPE fixed with the original locking mechanism and cementing was 94.1% and 93.2%, respectively, at ten years, and 84.7% and 81.3%, respectively, at 20 years (p = 0.840). CONCLUSION: The re-revision rate and the revision-free survival following acetabular component liner exchange revision surgery using the HXLPE liner were not influenced by the fixation technique used. Both techniques were associated with good survival at a mean follow-up of 13 years. Careful patient selection is necessary for isolated acetabular component liner exchange revision surgery in order to achieve the best outcomes.
引用
- Liu WKT, Cheung A, Fu H, et al. Acetabular component liner exchange with highly crosslinked polyethylene for wear and osteolysis. Bone Joint J. 2024. PMID: 38688488. doi:10.1302/0301-620X.106B5.BJJ-2023-0821.R2
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。