文献速递关节外科

重大髋臼骨缺损翻修髋关节置换术中的重建算法能否成功

Can a reconstruction algorithm in major acetabular bone loss be successful in revision hip arthroplasty?
PubMed 文献 · Bone Joint J · 2024-05-01

本研究回顾了105例Paprosky III型髋臼缺损翻修术,按重建算法治疗:IIIA型计划使用上方增强块和半球形髋臼假体,IIIB型计划使用半球形假体加增强块、杯笼重建或定制假体。平均随访7.6年,全因翻修生存率为94.3%,脱位率为3.8%,IIIA与IIIB型缺损间及是否单独使用半球形假体间生存率无差异,牛津髋关节评分平均提高16分。定制假体仅用于6例,占病例数<5%。

要点

  • Paprosky IIIA型缺损中72.0%(36/50)需要多孔金属增强块,其余14例仅用半球形髋臼假体。
  • Paprosky IIIB型缺损中63.6%(35/55)按计划完成重建,20例实际仅需半球形髋臼假体。
  • 平均随访7.6年,全因翻修生存率94.3%(95%CI 97.4至88.1),总体脱位率3.8%(4/105)。

核心结论

  • 研究结果表明,重建算法可为重大髋臼骨缺损的重建提供成功的方法。
  • 本系列中定制假体的使用指征已明确,占病例数<5%。

研究设计与样本

  • 回顾性连续系列研究,纳入接受重建算法治疗的Paprosky III型髋臼缺损患者。
  • 共105例手术,100例患者(5例双侧),平均年龄73岁(42至94岁)。
  • IIIA型缺损计划使用上方增强块和半球形髋臼假体;IIIB型缺损计划使用半球形髋臼假体加增强块、杯笼重建或定制假体。
  • 通过国家数字健康记录和注册报告识别再手术或再翻修,使用牛津髋关节评分(OHS)评估患者报告结局,采用Kaplan-Meier分析确定假体生存率。

主要发现

  • IIIA型缺损中72.0%(36/50)需要多孔金属增强块,其余14例仅用半球形髋臼假体。
  • IIIB型缺损中63.6%(35/55)按计划完成重建,20例实际仅需半球形髋臼假体。
  • 平均随访7.6年,全因翻修生存率94.3%(95%CI 97.4至88.1),总体脱位率3.8%(4/105)。
  • IIIA型与IIIB型缺损间、以及是否单独使用半球形假体间,生存率均无差异。
  • OHS平均提高16分;定制假体仅用于6例,用于前后径>80 mm的巨大缺损、复杂骨盆不连续或小骨盆内大量骨丢失的患者。

临床怎么用

  • 作者认为重建算法可为重大髋臼骨缺损提供成功的重建方法。
  • 作者在本系列中明确了定制假体的使用指征,其占病例数<5%。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

AIMS: The aims of this study were to determine the success of a reconstruction algorithm used in major acetabular bone loss, and to further define the indications for custom-made implants in major acetabular bone loss. METHODS: We reviewed a consecutive series of Paprosky type III acetabular defects treated according to a reconstruction algorithm. IIIA defects were planned to use a superior augment and hemispherical acetabular component. IIIB defects were planned to receive either a hemispherical acetabular component plus augments, a cup-cage reconstruction, or a custom-made implant. We used national digital health records and registry reports to identify any reoperation or re-revision procedure and Oxford Hip Score (OHS) for patient-reported outcomes. Implant survival was determined via Kaplan-Meier analysis. RESULTS: A total of 105 procedures were carried out in 100 patients (five bilateral) with a mean age of 73 years (42 to 94). In the IIIA defects treated, 72.0% (36 of 50) required a porous metal augment; the remaining 14 patients were treated with a hemispherical acetabular component alone. In the IIIB defects, 63.6% (35 of 55) underwent reconstruction as planned with 20 patients who actually required a hemispherical acetabular component alone. At mean follow-up of 7.6 years, survival was 94.3% (95% confidence interval 97.4 to 88.1) for all-cause revision and the overall dislocation rate was 3.8% (4 of 105). There was no difference observed in survival between type IIIA and type IIIB defects and whether a hemispherical implant alone was used for the reconstruction or not. The mean gain in OHS was 16 points. Custom-made implants were only used in six cases, in patients with either a mega-defect in which the anteroposterior diameter > 80 mm, complex pelvic discontinuity, and massive bone loss in a small pelvis. CONCLUSION: Our findings suggest that a reconstruction algorithm can provide a successful approach to reconstruction in major acetabular bone loss. The use of custom implants has been defined in this series and accounts for < 5% of cases.

来源:Bone Joint J,查看原文。版权归原作者所有。

引用

  1. Jones SA, Parker J, Horner M, et al. Can a reconstruction algorithm in major acetabular bone loss be successful in revision hip arthroplasty? Bone Joint J. 2024. PMID: 38688489. doi:10.1302/0301-620X.106B5.BJJ-2023-0809.R1

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。