解剖型髌骨假体的临床与计算评估
回顾性比较100例解剖型髌骨假体与100例性别、年龄、体重指数匹配的内移穹顶型假体全膝关节置换患者,解剖组膝前痛、慢性积液和髌骨上极碎裂率显著更高,影像学外侧半脱位和外侧倾斜更明显,有限元分析显示解剖型髌骨上极骨应变能密度增加。
要点
- 解剖型髌骨假体组膝前痛18% vs 穹顶型2%,慢性积液18% vs 2%,髌骨上极碎裂36% vs 13%(均P<.001)。
- 解剖组外侧髌骨半脱位2.3 vs 1.1 mm(P<.001),外侧倾斜5.4 vs 4.0 mm(P=.013),翻修7 vs 3例(P=.331)。
- 有限元分析显示解剖型髌骨上极骨应变能密度增加;切除厚度<13 mm时应变能密度增加超过2倍,负7°切除角时上极应变能增加6倍。
核心结论
- 解剖型髌骨假体患者较穹顶型髌骨患者膝前痛、慢性积液和上极碎裂发生率更高,计算评估证实髌骨上极应变能更高。
- 作者认为避免较大切除角度和过度髌骨切除可能改善解剖型髌骨的性能和存活率。
研究设计与样本
- 回顾性评估比较100例使用解剖型髌骨假体的全膝关节置换患者与100例性别、年龄和体重指数匹配的使用内移穹顶型假体患者。
- 所有手术均使用同一后稳定型全膝关节置换系统,随访至少1年,评估多项影像学参数。
- 另采用有限元分析进行计算评估,比较穿过髌骨残留骨的骨应变能密度。
主要发现
- 解剖型髌骨假体组较穹顶型组膝前痛发生率显著更高(18% vs 2%,P<.001)。
- 解剖型组较穹顶型组慢性积液发生率显著更高(18% vs 2%,P<.001)。
- 解剖型组较穹顶型组髌骨上极碎裂发生率显著更高(36% vs 13%,P<.001)。
- 影像学上解剖型组较穹顶型组外侧髌骨半脱位更明显(2.3 vs 1.1 mm,P<.001),外侧倾斜更明显(5.4 vs 4.0 mm,P=.013)。
- 解剖型组翻修例数多于穹顶型组(7 vs 3,P=.331),差异未达统计学显著。
临床怎么用
- 作者认为避免较大切除角度和过度髌骨切除可能改善解剖型髌骨的性能和存活率。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Anatomic patellar components for total knee arthroplasty (TKA) have demonstrated favorable in vivo kinematics. A novel failure mechanism in TKA patients with an anatomic patellar component was observed prompting an investigation to identify patient- and implant-related factors associated with suboptimal performance. METHODS: A retrospective evaluation was performed comparing 100 TKA patients with an anatomic patellar component to 100 gender-, age-, and body mass index-matched patients with a medialized dome component. All surgeries were performed with the same posterior-stabilized TKA system with minimum of 1-year follow-up. Several radiographic parameters were assessed. A separate computational evaluation was performed using finite-element analysis, comparing bone strain energy density through the patella bone remnant. RESULTS: Patients with an anatomic patellar component had significantly higher rates of anterior knee pain (18 versus 2%, P < .001), chronic effusions (18 versus 2%, P < .001), and superior patellar pole fragmentation (36 versus 13%, P < .001) compared to those with a dome component. Radiographically, the anatomic group demonstrated more lateral patellar subluxation (2.3 versus 1.1 mm, P < .001) and lateral tilt (5.4 versus 4.0 mm, P = .013). Furthermore, there were more revisions in the anatomic group (7 versus 3, P = .331). On computational evaluation, all simulations demonstrated increased bone strain energy density at the superior patellar pole with the anatomic patella. Resection thickness <13 mm resulted in over 2-fold higher strain energy density, and negative resection angle of 7° resulted in 6-fold higher superior pole strain energy. CONCLUSIONS: Patients with an anatomic patellar component showed higher rates of anterior knee pain, chronic effusion, and superior pole fragmentation compared to patients with a dome patella, with higher superior patellar pole strain energy confirmed on computational evaluation. Avoiding higher resection angles and excessive patellar resection may improve the performance and survivorship of the anatomic patella.
引用
- Kleeman-Forsthuber LT, Owens JM, Johnson RM, et al. Clinical and Computational Evaluation of an Anatomic Patellar Component. J Arthroplasty. 2024. PMID: 38735546. doi:10.1016/j.arth.2024.05.007
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。