全髋关节置换术中二维与三维术前计划的比较
本研究纳入60例因症状性髋骨关节炎行初次全髋关节置换术的患者,随机分配至机器人臂辅助或传统全髋关节置换术,对所有患者进行数字二维模板规划和机器人软件三维规划。结果显示三维模板规划在水平旋转中心内移、垂直旋转中心恢复及腿长恢复方面优于二维模板规划,且在不同骨关节炎模式亚型中存在差异。
要点
- 三维模板规划较二维模板规划水平旋转中心内移更少(-1.2 vs -0.2 mm,P=0.002)。
- 三维模板规划垂直旋转中心恢复更准确(1.63 vs 0.3 mm,P<0.001)。
- 三维模板规划腿长恢复计划更优(+0.23 vs -0.74 mm,P=0.019)。
核心结论
- 三维规划在计划恢复原生关节力学方面准确性更高,且两种规划方法在不同骨关节炎模式亚型间存在明显差异,为采用二维规划的临床医生提供了有价值的信息。
研究设计与样本
- 研究纳入60例因症状性髋骨关节炎行初次全髋关节置换术的患者,随机分配至机器人臂辅助或传统全髋关节置换术,对所有患者进行数字二维模板规划和机器人软件三维规划,所有测量在术前计算机断层扫描定位像上以对侧髋为参考进行。
主要发现
- 三维模板规划较二维模板规划水平旋转中心内移更少(-1.2 vs -0.2 mm,P=0.002)。
- 三维模板规划较二维模板规划垂直旋转中心恢复更准确(1.63 vs 0.3 mm,P<0.001)。
- 三维模板规划较二维模板规划腿长恢复计划更优(+0.23 vs -0.74 mm,P=0.019)。
- 敏感性分析显示,在内侧骨关节炎模式患者中,三维规划水平旋转中心内移更少且偏心距减少更少;在外上骨关节炎模式患者中,三维规划水平旋转中心外移更少且偏心距增加更少。
- 三维规划在股骨柄、髋臼杯尺寸和颈角方面重复性更优,而二维规划常导致股骨柄和髋臼杯尺寸偏小。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Preoperative planning in total hip arthroplasty (THA) involves utilizing radiographs or advanced imaging modalities, including computerized tomography scans, for precise prediction of implant sizing and positioning. This study aimed to compare 3-dimensional (3D) versus 2-dimensional (2D) preoperative planning in primary THA with respect to key surgical metrics, including restoration of the horizontal and vertical center of rotation (COR), combined offset, and leg length. METHODS: This study included 60 patients undergoing primary THA for symptomatic hip osteoarthritis (OA), randomly allocated to either robotic arm-assisted or conventional THA. Digital 2D templating and 3D planning using the robotic software were performed for all patients. All measurements to evaluate the accuracy of templating methods were conducted on the preoperative computerized tomography scanogram, using the contralateral hip as a reference. Sensitivity analyses explored differences between 2D and 3D planning in patients who had superolateral or medial OA patterns. RESULTS: Compared to 2D templating, 3D templating was associated with less medialization of the horizontal COR (-1.2 versus -0.2 mm, P = .002) and more accurate restoration of the vertical COR (1.63 versus 0.3 mm, P < .001) with respect to the contralateral side. Furthermore, 3D templating was superior for planned restoration of leg length (+0.23 versus -0.74 mm, P = .019). Sensitivity analyses demonstrated that in patients who had medial OA, 3D planning resulted in less medialization of horizontal COR and less offset reduction. Conversely, in patients who had superolateral OA, there was less lateralization of horizontal COR and less offset increase using 3D planning. Additionally, 3D planning showed superior reproducibility for stem, acetabular cup sizes, and neck angle, while 2D planning often led to smaller stem and cup sizes. CONCLUSIONS: Our findings indicated higher accuracy in the planned restoration of native joint mechanics using 3D planning. Additionally, this study highlights distinct variances between the 2 planning methods across different OA pattern subtypes, offering valuable insights for clinicians employing 2D planning.
引用
- Fontalis A, Yasen AT, Kayani B, et al. Two-Dimensional Versus Three-Dimensional Preoperative Planning in Total Hip Arthroplasty. J Arthroplasty. 2024. PMID: 38810812. doi:10.1016/j.arth.2024.05.054
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。