基于CT规划的全髋关节置换术与机械臂辅助全髋关节置换术的前瞻性随机对照试验
这项前瞻性随机对照试验纳入60例症状性髋骨关节炎患者,比较常规全髋关节置换术与机械臂辅助全髋关节置换术复现术前计划髋旋转中心的可重复性。结果显示机械臂辅助组在水平与垂直髋旋转中心误差、联合偏心距、髋臼假体定位及肢体长度矫正精度上均优于常规组,但两组患者报告结局在基线与术后一年相当。作者认为需长期与登记数据评估这些精度差异是否转化为假体生存与功能结局的改善。
要点
- 机械臂辅助全髋关节置换术在复现计划髋旋转中心、联合偏心距、髋臼定位及肢体长度方面精度优于常规手术。
- 两组患者报告结局在基线与术后一年可比,机械臂辅助组术后物理治疗次数更少。
- 作者指出需长期与登记数据评估精度优势是否转化为假体生存与功能结局改善。
核心结论
- 该随机对照试验提示机械臂辅助全髋关节置换术在复现原生髋旋转中心、保留联合偏心距、矫正肢体长度及实现 desired 髋臼假体定位方面精度更优。
- 作者指出需通过长期与登记数据评估这些发现是否转化为假体生存与功能结局的改善。
研究设计与样本
- 前瞻性随机对照试验纳入60例症状性髋骨关节炎患者,随机接受常规全髋关节置换术或机械臂辅助全髋关节置换术。
- 两组患者均行术前与术后CT扫描,并使用机器人软件制定患者特异性计划。
- 术后六周在术前与术后CT扫描图上测量髋旋转中心、联合偏心距、髋臼方向及肢体长度差异。
主要发现
- 实现计划水平髋旋转中心的绝对误差:机械臂辅助组中位数1.4 mm(四分位距0.87至3.42) vs 常规组4.3 mm(四分位距3至6.8;p < 0.001)。
- 垂直髋旋转中心绝对误差:机械臂辅助组均值0.91 mm(标准差0.73) vs 常规组2.3 mm(标准差1.3;p < 0.001)。
- 联合偏心距绝对误差:机械臂辅助组中位数2 mm(四分位距0.97至5.45) vs 常规组3.9 mm(四分位距2至7.9;p = 0.019)。
- 实现 desired 髋臼假体定位的精度:前倾角与倾角均方根误差机械臂辅助组分别为2.6与1.3,常规组分别为8.9与5.3。
- 肢体长度矫正平均误差:机械臂辅助组0.6 mm vs 常规组1.4 mm(p < 0.001);术后物理治疗次数机械臂辅助组中位数六次(四分位距4.5至8) vs 常规组八次(四分位距6至11;p = 0.005)。
关键数值与推荐
- 两组基线特征包括脊柱骨盆活动度均无显著差异。
- 两组患者报告结局在基线与术后一年可比。
临床怎么用
- 原文未据此给出推荐。
局限性
- 作者指出需通过长期与登记数据评估这些发现是否转化为假体生存与功能结局的改善。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
AIMS: Achieving accurate implant positioning and restoring native hip biomechanics are key surgeon-controlled technical objectives in total hip arthroplasty (THA). The primary objective of this study was to compare the reproducibility of the planned preoperative centre of hip rotation (COR) in patients undergoing robotic arm-assisted THA versus conventional THA. METHODS: This prospective randomized controlled trial (RCT) included 60 patients with symptomatic hip osteoarthritis undergoing conventional THA (CO THA) versus robotic arm-assisted THA (RO THA). Patients in both arms underwent pre- and postoperative CT scans, and a patient-specific plan was created using the robotic software. The COR, combined offset, acetabular orientation, and leg length discrepancy were measured on the pre- and postoperative CT scanogram at six weeks following surgery. RESULTS: There were no significant differences for any of the baseline characteristics including spinopelvic mobility. The absolute error for achieving the planned horizontal COR was median 1.4 mm (interquartile range (IQR) 0.87 to 3.42) in RO THA versus 4.3 mm (IQR 3 to 6.8; p < 0.001); vertical COR mean 0.91 mm (SD 0.73) in RO THA versus 2.3 mm (SD 1.3; p < 0.001); and combined offset median 2 mm (IQR 0.97 to 5.45) in RO THA versus 3.9 mm (IQR 2 to 7.9; p = 0.019). Improved accuracy was observed with RO THA in achieving the desired acetabular component positioning (root mean square error for anteversion and inclination was 2.6 and 1.3 vs 8.9 and 5.3, repectively) and leg length (mean 0.6 mm vs 1.4 mm; p < 0.001). Patient-reported outcome measures were comparable between the two groups at baseline and one year. Participants in the RO THA group needed fewer physiotherapy sessions postoperatively (median six (IQR 4.5 to 8) vs eight (IQR 6 to 11; p = 0.005). CONCLUSION: This RCT suggested that robotic-arm assistance in THA was associated with improved accuracy in restoring the native COR, better preservation of the combined offset, leg length correction, and superior accuracy in achieving the desired acetabular component positioning. Further evaluation through long-term and registry data is necessary to assess whether these findings translate into improved implant survival and functional outcomes.
引用
- Fontalis A, Kayani B, Plastow R, et al. A prospective randomized controlled trial comparing CT-based planning with conventional total hip arthroplasty versus robotic arm-assisted total hip arthroplasty. Bone Joint J. 2024. PMID: 38555946. doi:10.1302/0301-620X.106B4.BJJ-2023-1045.R1
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。