定制截骨导板设计如何影响骨盆肿瘤切除的准确性与工效学?一项尸体研究
在五具新鲜全尸体标本上模拟六种骨盆虚拟肿瘤,比较块型与贴片型定制截骨导板的切缘准确性和术中工效学评分。贴片型在最近点偏差(中位数1 mm vs 2 mm,p=0.02)、最大偏差(3 mm vs 4 mm,p=0.002)和工效学评分(92% vs 84%,p=0.03)上略优于块型。作者认为两者性能相当,贴片型略有优势,但尸体研究样本小,需独立重复验证。
要点
- 贴片型导板最近点偏差中位数1 mm,块型为2 mm(差值1 mm,p=0.02)。
- 贴片型导板最大偏差中位数3 mm,块型为4 mm(差值1 mm,p=0.002)。
- 贴片型导板工效学评分中位数92%,块型为84%(差值8%,p=0.03)。
核心结论
- 作者观察到贴片型与块型定制截骨导板在准确性和工效学上性能相当,贴片型略有优势,尤其在复杂区域(I区和IV区)。
- 由于尸体研究样本量小,这些结果需要独立重复验证。
研究设计与样本
- 实验性研究,使用五具新鲜全尸体解剖标本(三女两男,中位年龄79岁,中位体重66 kg)。
- 根据Enneking分类在三个区域(I区:髂骨翼;II区:髋臼周围;I和IV区:骶髂关节区域)模拟六种虚拟肿瘤,比较两种定制截骨导板设计对切除边缘准确性和术中工效学评分的影响。
主要发现
- 贴片型导板在最近点偏离计划边缘的中位数为1 mm,块型为2 mm(中位数差值1 mm;p=0.02)。
- 贴片型导板偏离计划边缘的最大偏差中位数为3 mm,块型为4 mm(中位数差值1 mm;p=0.002)。
- 贴片型导板的术中工效学评分中位数为92%,块型为84%(中位数差值8%;p=0.03)。
关键数值与推荐
- 切除边缘准确性通过CT扫描分析评估,指标为最近点偏离计划边缘和偏离计划边缘的最大偏差。
- 术中工效学评分范围为0至100分,100分为最佳。
临床怎么用
- 作者认为,与较大的块型设计相比,贴片型定制截骨导板在特定区域与骨接触点更薄且软组织剥离更少,可能有助于实现阴性肿瘤骨边缘,但不解决软组织边缘问题。
局限性
- 作者指出,由于尸体研究样本量小,这些结果需要独立重复验证。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Customized cutting guides are technical aids that make primary pelvic bone tumor resection safer and more reliable. Although the effectiveness of such devices appears to be widely accepted, their conception and design remain varied. Two main designs have been reported: the heavier block-type customized cutting guides and the lighter patch-type customized cutting guides. As recent tools, there must be more evidence regarding the impact of design on their accuracy and ergonomics. Thus, an evaluation of their respective performances appears warranted. QUESTIONS/PURPOSES: In a cadaver model, we assessed whether (1) a thinner, patch-type customized cutting guide design results in resections that are closer to the planned resections than the heavier block-type customized cutting guides, and (2) the patch-type customized cutting guide design is more ergonomic than the block-type customized cutting guide with improved usability in surgery (in terms of bulkiness, ease of placement, primary and secondary stability, and stability during cutting). METHODS: We conducted an experimental study involving five fresh whole-body anatomic specimens (three women and two men with a median age of 79 years and median weight of 66 kg) by simulating six virtual tumors in three areas according to the Enneking classification (Zones I: iliac wing, II: periacetabular area, and I and IV: sacroiliac joint area). We compared the impact of the customized cutting guide's design on performance in terms of the resection margin accuracy using CT scan analysis (deviation from the planned margin at the closest point and the maximum deviation from the planned margin) and the intraoperative ergonomic score under conditions simulating those of an oncologic resection of a bone tumor (with a range of 0 to 100, with 100 being best). RESULTS: The patch customized cutting guides performed slightly better than the block customized cutting guides regarding deviation from the planned margin at the closest point, with median values of 1 mm versus 2 mm (difference of medians 1 mm; p = 0.02) and maximum deviation from the planned margin of 3 versus 4 mm (difference of medians 1 mm; p = 0.002). In addition, the patch design was perceived to be slightly more ergonomic than the block design, with a 92% median score versus 84% for the block design (difference of medians 8%; p = 0.03). CONCLUSION: We observed an equivalence in performance regarding accuracy and ergonomics, with slight advantages for patch customized cutting guides, especially in complex zones (Zone I and IV). Owing to a small cohort in a cadaver study, these results need independent replication. CLINICAL RELEVANCE: The patch-type customized cutting guide with thinner contact spots to the bone in specific areas and less soft tissue dissection might offer an advantage over a larger block design for achieving negative oncologic bony margins, but it does not address issues of soft tissue margins.
引用
- Fragnaud H, Biscaccianti V, Hascoët JY, et al. How Does Customized Cutting Guide Design Affect Accuracy and Ergonomics in Pelvic Tumor Resection? A Study in Cadavers. Clin Orthop Relat Res. 2024. PMID: 38323977. doi:10.1097/CORR.0000000000003000
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。