文献速递骨质疏松与代谢性骨病创伤骨科

基于有限元分析计算的股骨近端骨折载荷与失效能量衍生的一种新型髋部骨折风险指数

A new hip fracture risk index derived from FEA-computed proximal femur fracture loads and energies-to-failure.
PubMed 文献 · Osteoporos Int · 2024-01-22

研究基于AGES-Reykjavik队列中110例髋部骨折受试者与235例年龄性别匹配对照者的定量CT有限元分析,采用主成分分析构建整合四种载荷条件下屈服与极限失效载荷及失效能量的全局骨折风险指数。第一主成分(PC1)为髋部骨折的显著预测因子(p值<0.001),男性中PC1的AUC(0.776)高于所有有限元参数联合的AUC(0.737)(p值<0.001)。结论认为该全局有限元骨折风险指数提高了男性髋部骨折风险的预测准确性。

要点

  • 基于定量CT的有限元分析整合股骨近端骨几何与骨密度,计算特定载荷条件下的骨折载荷与失效能量。
  • 第一主成分(PC1)作为全局有限元骨折风险指数,是髋部骨折的显著预测因子(p值<0.001)。
  • 男性中PC1的AUC(0.776)高于所有有限元参数联合的AUC(0.737)(p值<0.001)。

核心结论

  • 全局有限元骨折风险指数提高了男性髋部骨折风险的预测准确性。

研究设计与样本

  • 研究纳入AGES-Reykjavik研究中110例髋部骨折受试者与235例年龄和性别匹配的对照者,基于定量CT的个体化有限元分析计算四种载荷条件下的屈服与极限失效载荷及失效能量,采用主成分分析构建全局骨折风险指数,并通过逻辑回归模型基于分层重采样比较预测性能。

主要发现

  • 第一主成分(PC1)被定义为全局有限元骨折风险指数,是髋部骨折的显著预测因子(p值<0.001)。
  • 男性中基于PC1的受试者工作特征曲线下面积(AUC)为0.776,高于所有有限元参数联合的AUC 0.737(p值<0.001)。

关键数值与推荐

  • PC1对髋部骨折预测的p值<0.001。
  • 男性中PC1的AUC为0.776,所有有限元参数联合的AUC为0.737,两者比较p值<0.001。

临床怎么用

  • 原文未据此给出推荐。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

UNLABELLED: Hip fracture risk assessment is an important but challenging task. Quantitative CT-based patient-specific finite element (FE) analysis (FEA) incorporates bone geometry and bone density in the proximal femur. We developed a global FEA-computed fracture risk index to increase the prediction accuracy of hip fracture incidence. PURPOSE: Quantitative CT-based patient-specific finite element (FE) analysis (FEA) incorporates bone geometry and bone density in the proximal femur to compute the force (fracture load) and energy necessary to break the proximal femur in a particular loading condition. The fracture loads and energies-to-failure are individually associated with incident hip fracture, and provide different structural information about the proximal femur. METHODS: We used principal component analysis (PCA) to develop a global FEA-computed fracture risk index that incorporates the FEA-computed yield and ultimate failure loads and energies-to-failure in four loading conditions of 110 hip fracture subjects and 235 age- and sex-matched control subjects from the AGES-Reykjavik study. Using a logistic regression model, we compared the prediction performance for hip fracture based on the stratified resampling. RESULTS: We referred the first principal component (PC1) of the FE parameters as the global FEA-computed fracture risk index, which was the significant predictor of hip fracture (p-value < 0.001). The area under the receiver operating characteristic curve (AUC) using PC1 (0.776) was higher than that using all FE parameters combined (0.737) in the males (p-value < 0.001). CONCLUSIONS: The global FEA-computed fracture risk index increased hip fracture risk prediction accuracy in males.

来源:Osteoporos Int,查看原文。版权归原作者所有。

引用

  1. Cao X, Keyak JH, Sigurdsson S, et al. A new hip fracture risk index derived from FEA-computed proximal femur fracture loads and energies-to-failure. Osteoporos Int. 2024. PMID: 38246971. doi:10.1007/s00198-024-07015-6

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。