文献速递关节外科

部分偏心距恢复方案在初次全髋关节置换术中反而导致活动度下降:一项三维计算机模拟研究

Some Offset Restoration Options Can Paradoxically Lead to Decreased Range of Motion in Primary Total Hip Arthroplasty: A 3-Dimensional Computer Simulation Study.
PubMed 文献 · J Arthroplasty · 2023-08-23

该回顾性计算机模拟研究纳入43例机器人辅助初次全髋关节置换术,在考虑矢状面骨盆倾斜的情况下测量骨-骨撞击前的最大外旋和内旋角度,评估不同假体设计对偏心距和活动度的影响。结果显示延长聚乙烯内衬可减少骨-骨撞击但降低假体活动度,而加高头或不同股骨柄偏心距/颈角选项要么无活动度改善,要么反常增加骨-骨撞击。作者认为部分患者从标准偏心距过渡到高偏心距或内翻颈时会出现反常的骨-骨撞击增加,术前个性化三维建模可能有助于指导假体选择以优化结果。

要点

  • 延长聚乙烯内衬减少骨-骨撞击但降低髋伸展和屈曲假体活动度。
  • 加高头或不同股骨柄偏心距/颈角选项在部分患者中无活动度改善或反常增加骨-骨撞击。
  • 作者认为术前个性化三维建模可能有助于指导假体选择以优化结果。

核心结论

  • 部分患者从标准偏心距过渡到高偏心距或内翻颈时,由于骨盆和股骨近端骨形态,会出现反常的骨-骨撞击增加。
  • 作者认为对于该组患者,术前个性化三维建模可能有助于指导假体选择以优化结果。

研究设计与样本

  • 回顾性计算机模拟研究,纳入43例机器人辅助初次全髋关节置换术。
  • 考虑矢状面骨盆倾斜,测量0°髋屈曲时最大外旋以及90°和100°髋屈曲时最大内旋(骨-骨撞击发生前)。
  • 假体选项包括中立或延长聚乙烯内衬、中立或加高假体头、标准或高偏心距股骨柄、132°或127°颈角股骨柄。

主要发现

  • 延长聚乙烯内衬使用减少两种股骨柄的骨-骨撞击,但降低髋伸展假体活动度(平均-4.5至5°,范围-10至0°)和髋屈曲假体活动度(平均-3至3.7°,范围-10至0°),归因于头直径减小。
  • 使用加高头或不同股骨柄偏心距/颈角选项导致:股骨柄1中60%、股骨柄2中28%无活动度改善;股骨柄1使用127°颈角时19%、股骨柄2使用高偏心距选项时7%出现反常的骨-骨撞击增加。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: In total hip arthroplasty (THA), femoral offset restoration results in optimal biomechanics and range of motion (ROM) without bone-bone impingement. We hypothesized that differences in implant design features significantly affect bone-bone impingement risk in primary THA. METHODS: This retrospective computer simulation study included a cohort of 43 primary robotic arm-assisted THA. Considering sagittal pelvic tilt, we measured the maximum external rotation at 0° hip flexion and the maximum internal rotation at both 90° and 100° hip flexion before any bone-bone impingement occurred. To influence the offset, we included neutral or extended polyethylene liners, neutral or plus prosthetic heads, standard or high-offset stems, and stems with 132° or 127° neck angles. RESULTS: Extended polyethylene liner use resulted in decreased bone-bone impingement for both stems but also decreased prosthetic ROM in hip extension (mean -4.5 to 5°, range -10 to 0°) and hip flexion (mean -3 to 3.7°, range -10 to 0°) due to decreases in head diameter. Using a plus head or different stem offset/neck angle options resulted in either (1) no improvement in ROM (stem 1: 60%; stem 2: 28%) or (2) a paradoxical increase in bone-bone impingement (stem 1 with 127°: 19% and stem 2 with high offset option: 7%). CONCLUSION: Counterintuitively, a subset of patients experience a paradoxical increase in bone-bone impingement when transitioning from standard to high-offset or varus necks due to the pelvic and proximal femoral bone shape. For this group of patients, preoperative personalized 3-dimensional modeling may help guide implant choice for optimizing outcomes.

来源:J Arthroplasty,查看原文。版权归原作者所有。

引用

  1. Pour AE, Donnelley CA, Tung WS, et al. Some Offset Restoration Options Can Paradoxically Lead to Decreased Range of Motion in Primary Total Hip Arthroplasty: A 3-Dimensional Computer Simulation Study. J Arthroplasty. 2023. PMID: 37625464. doi:10.1016/j.arth.2023.08.057

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。