关节轨迹机器学习:一种从单平面X射线图像自主测量全膝关节置换术后运动学的自主方法
本研究开发了一种全自主流程,从单平面 radiographic 图像量化三维全膝关节置换术后运动学,包括卷积神经网络分割植入物、与预计算形状库比对获取初始姿态估计、以及数值优化对齐三维植入物轮廓与透视图像获得最终姿态。该自主技术产生的运动学测量与人工监督测量相当,测试数据均方根差异小于0.7毫米和4度,外部验证研究为0.8毫米和1.7度。结论认为该全自主方法产生与人工监督方法等效的结果,并可能很快使这些测量在临床环境中变得实用。
要点
- 全自主流程可从单平面X射线图像测量三维全膝关节置换术后运动学。
- 与人工监督测量相比,测试数据均方根差异小于0.7毫米和4度。
- 外部验证研究的均方根差异为0.8毫米和1.7度。
核心结论
- 全自主方法从单平面 radiographic 图像测量三维全膝关节置换术后运动学产生与人工监督方法等效的结果,并可能很快使这些测量在临床环境中变得实用。
研究设计与样本
- 研究展示了一种从单平面 radiographic 成像量化三维全膝关节置换术后运动学的全自主流程。
- 流程首先使用卷积神经网络从图像中分割股骨和胫骨植入物。
- 然后将分割图像与预计算形状库比对以获得初始姿态估计。
- 最后使用数值优化程序对齐三维植入物轮廓与透视图像以获得最终植入物姿态。
主要发现
- 自主技术可靠地产生与人工监督测量相当的运动学测量,测试数据均方根差异小于0.7毫米和4度。
- 外部验证研究的均方根差异为0.8毫米和1.7度。
临床怎么用
- 原文未据此给出推荐。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Dynamic radiographic measurements of 3-dimensional (3-D) total knee arthroplasty (TKA) kinematics have provided important information for implant design and surgical technique for over 30 years. However, current methods of measuring TKA kinematics are too cumbersome, inaccurate, or time-consuming for practical clinical application. Even state-of-the-art techniques require human-supervision to obtain clinically reliable kinematics. Eliminating human supervision could potentially make this technology practical for clinical use. METHODS: We demonstrate a fully autonomous pipeline for quantifying 3D-TKA kinematics from single-plane radiographic imaging. First, a convolutional neural network (CNN) segmented the femoral and tibial implants from the image. Second, those segmented images were compared to precomputed shape libraries for initial pose estimates. Lastly, a numerical optimization routine aligned 3D implant contours and fluoroscopic images to obtain the final implant poses. RESULTS: The autonomous technique reliably produces kinematic measurements comparable to human-supervised measures, with root-mean-squared differences of less than 0.7 mm and 4° for our test data, and 0.8 mm and 1.7° for external validation studies. CONCLUSION: A fully autonomous method to measure 3D-TKA kinematics from single-plane radiographic images produces results equivalent to a human-supervised method, and may soon make it practical to perform these measurements in a clinical setting.
引用
- Jensen AJ, Flood PDL, Palm-Vlasak LS, et al. Joint Track Machine Learning: An Autonomous Method of Measuring Total Knee Arthroplasty Kinematics From Single-Plane X-Ray Images. J Arthroplasty. 2023. PMID: 37236287. doi:10.1016/j.arth.2023.05.029
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。