文献速递关节外科

锻造型钴铬钼合金是否随时间推移而变差?

Has Wrought Cobalt-Chromium-Molybdenum Alloy Changed for the Worse Over Time?
PubMed 文献 · J Arthroplasty · 2023-04-05

本研究评估1990年代、2000年代和2010年代植入的全髋关节置换术(THA)中545个模块化股骨头,按植入年代分组作为制造日期的替代指标,并对120个亚组进行金相分析以观察合金带状组织。结果显示损伤评分分布在各时间段一致,但柱状损伤发生率在1990年代至2000年代间显著增加;带状组织也从1990年代至2000年代增加,但柱状损伤和带状组织水平在2010年代似乎略有恢复。作者认为带状组织提供了优先腐蚀位点,使柱状损伤得以发生,且不同制造商间无差异,可能源于共享棒材供应商。

要点

  • 柱状损伤发生率在1990年代至2000年代间显著增加。
  • 合金带状组织从1990年代至2000年代增加,2010年代似乎略有恢复。
  • 不同制造商间带状组织无差异,可能源于共享棒材供应商。

核心结论

  • 带状组织提供了优先腐蚀位点,使柱状损伤得以发生,在过去3个年代中有所增加。
  • 不同制造商间未见差异,可能源于共享棒材供应商。
  • 这些发现重要,因为带状组织可以避免,从而降低THA模块化连接处严重柱状损伤及因不良局部组织反应导致失败的风险。

研究设计与样本

  • 评估545个模块化股骨头的损伤严重程度,按植入年代(1990年代、2000年代、2010年代)分组作为制造日期的替代指标。
  • 对120个亚组股骨头进行金相分析以观察合金带状组织。

主要发现

  • 损伤评分分布在各时间段一致。
  • 柱状损伤发生率在1990年代至2000年代间显著增加。
  • 带状组织从1990年代至2000年代增加,但柱状损伤和带状组织水平在2010年代似乎略有恢复。
  • 不同制造商间未见差异。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Total hip arthroplasty (THA) failure due to tribocorrosion of modular junctions and resulting adverse local tissue reactions to corrosion debris have seemingly increased over the past few decades. Recent studies have found that chemically-induced column damage seen on the inner head taper is enabled by banding in the alloy microstructure of wrought cobalt-chromium-molybdenum alloy femoral heads, and is associated with more material loss than other tribocorrosion processes. It is unclear if alloy banding represents a recent phenomenon. The purpose of this study was to examine THAs implanted in the 1990s, 2000s, and 2010s to determine if alloy microstructure and implant susceptibility to severe damage has increased over time. METHODS: Five hundred and forty-five modular heads were assessed for damage severity and grouped based on decade of implantation to serve as a proxy measure for manufacturing date. A subset of heads (n = 120) was then processed for metallographic analysis to visualize alloy banding. RESULTS: We found that damage score distribution was consistent over the time periods, but the incidence of column damage significantly increased between the 1990s and 2000s. Banding also increased from the 1990s to 2000s, but both column damage and banding levels appear to recover slightly in the 2010s. CONCLUSION: Banding, which provides preferential corrosion sites enabling column damage, has increased over the last 3 decades. No difference between manufacturers was seen, which may be explained by shared suppliers of bar stock material. These findings are important as banding can be avoidable, reducing the risk of severe column damage to THA modular junctions and failure due to adverse local tissue reactions.

来源:J Arthroplasty,查看原文。版权归原作者所有。

引用

  1. McCarthy SM, Hall DJ, Mell SP, et al. Has Wrought Cobalt-Chromium-Molybdenum Alloy Changed for the Worse Over Time? J Arthroplasty. 2023. PMID: 37028774. doi:10.1016/j.arth.2023.03.091

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。