当代股骨柄假体骨折:这一罕见并发症的常见趋势
该研究分析了13例不同设计的当代多孔涂层股骨柄假体骨折病例,其中12例为男性,1例为女性,平均初次手术年龄53岁(范围34至76岁)。13例中10例身体质量指数超过30(肥胖),其中3例超过40;平均骨折时间为7.6年(范围7个月至12年)。结论指出股骨柄假体骨折虽罕见但后果灾难性,并识别了肥胖、热处理降低力学性能、医源性假体损伤及不同厂商柄与头混配等制造、患者和手术相关因素。
要点
- 13例当代多孔涂层股骨柄骨折中,10例患者身体质量指数超过30,3例超过40。
- 4例钛合金柄在翻修头/杯置换术后平均3.6年骨折,骨折起始处有医源性机械和电灼损伤。
- 6例组配式柄在柄-套或柄-颈界面失败,有微动腐蚀证据;2例柄-颈骨折涉及不同厂商头/柄混配。
核心结论
- 股骨柄假体骨折虽罕见,但在初次和翻修全髋关节置换术中可造成灾难性后果。
- 已识别导致柄失败的制造、患者和手术因素,包括患者肥胖、热处理降低力学性能、医源性假体损伤以及不同厂商柄与头混配。
研究设计与样本
- 分析了13例不同设计的当代多孔涂层股骨柄骨折病例,以确定机械失败的原因和 contributing 因素。
- 病例包括12例男性和1例女性,初次手术时平均年龄53岁(范围34至76岁)。
- 13例中10例身体质量指数超过30(肥胖),这10例中3例身体质量指数超过40。
- 平均骨折时间为7.6年(范围7个月至12年)。
主要发现
- 4例钛合金柄在翻修头/杯置换术后平均3.6年骨折,骨折起始部位股骨颈有相关的医源性机械和电灼损伤。
- 6例组配式柄在柄-套或柄-颈界面失败,有微动腐蚀证据;2例柄-颈骨折中,不同厂商的头/柄混配导致未经测试的机械偏距和加载。
- 2例近端颈骨折和1例中段柄骨折发生于涂层钴铬合金柄,患者均为肥胖男性;颈骨折(10至12年)发生于固定良好的柄,近端固定不足 contributed 于中段柄骨折(7个月)。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Fracture of contemporary femoral stems is a rare occurrence in total hip arthroplasty. A knowledge gap remains regarding manufacturing, patient, and surgeon factors that may contribute to the increased risk of this complication. METHODS: We analyzed 13 contemporary fractured porous-coated femoral stems of various designs to determine cause and contributing factors of mechanical failure. Cases included 12 men and 1 woman who had an average age at index surgery of 53 years (range, 34 to 76 years). There were 10 of 13 patients who had a body mass index more than 30 (obese); 3 of the 10 had a body mass index more than 40. The mean time to fracture was 7.6 years (range, 7 months to 12 years). RESULTS: There were 4 titanium alloy stems that fractured an average of 3.6 years postrevision surgery for head/cup exchange and had associated iatrogenic mechanical and electrocautery damage to the femoral neck at fracture initiation sites. There were 6 modular stems that failed at the stem-sleeve or stem-neck interfaces with evidence of fretting corrosion. For 2 stem-neck fractures, mismatched head/stem combinations from different manufacturers resulted in untested mechanical offsets and loading. There were 2 proximal neck fractures and 1 mid-shaft fracture of coated cobalt-chromium alloy stems that occurred in 3 obese men. The neck fractures (10 to 12 years) were well-fixed stems. Lack of proximal fixation contributed to the mid-shaft fracture (7 months). CONCLUSION: While rare, femoral stem fractures pose catastrophic outcomes in primary and revision total hip arthroplasty. Manufacturing, patient, and surgical factors contributing to stem failures were identified, including patient obesity, heat-treatment reduction of mechanical properties, iatrogenic implant damage, and mixing of different vendor stems and heads.
引用
- Cook SD, Patron LP, Lavernia CJ, et al. Fracture of Contemporary Femoral Stems: Common Trends in This Rare Occurrence. J Arthroplasty. 2023. PMID: 37086930. doi:10.1016/j.arth.2023.04.025
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。