平均随访13年时高交联聚乙烯内衬厚度不影响初次全髋关节置换术的生存率:2565髋单设计内衬研究
该回顾性研究纳入2565例使用高交联聚乙烯(HXLPE)内衬的初次全髋关节置换术(THA),平均随访13年,按每1毫米内衬厚度分组,评估内衬厚度对再手术、全因翻修及内衬相关翻修的影响。结果显示全因翻修率5.6%,内衬相关翻修率0.04%,内衬厚度与全因翻修无显著关联(P=.286),与内衬相关翻修亦无关联(n=1)。作者认为使用较薄HXLPE内衬以最大化股骨头尺寸是安全的,不增加翻修率或内衬失败。
要点
- 平均随访13年,全因翻修率5.6%,内衬相关翻修率仅0.04%。
- 内衬厚度分层与全因翻修无显著差异(P=.286),与内衬相关翻修无关联(n=1)。
- 再手术组与未再手术组平均内衬厚度差异有统计学意义但无临床意义(7.09 vs 6.89 mm,P=.01)。
核心结论
- 在本队列中,内衬厚度与全因无翻修生存率无关,再手术或全因翻修患者与未发生者之间内衬厚度无临床显著差异。
- 整个队列仅1例内衬相关失败,作者认为使用较薄HXLPE内衬以最大化股骨头尺寸是安全的,平均随访13年不增加翻修率或内衬失败。
研究设计与样本
- 回顾性识别2565例使用HXLPE内衬的初次THA,平均随访13年(范围11至19年)。
- 按每1毫米聚乙烯厚度分组,内衬厚度4.9至12.7 mm,其中三分之一小于6 mm。
- 主要结局为再手术、全因翻修和内衬相关翻修。
主要发现
- 再手术率为7.3%,全因翻修率为5.6%,内衬相关翻修率为0.04%。
- 按内衬厚度分层,全因翻修无显著差异(P = .286),内衬厚度与内衬相关翻修无关(n = 1)。
- 再手术组平均内衬厚度7.09 mm vs 未再手术组6.89 mm(P = .01),差异有统计学意义但无临床意义。
- 全因翻修组平均内衬厚度7.16 mm vs 未翻修组6.89 mm(P = .031),差异有统计学意义但无临床意义。
临床怎么用
- 作者认为,使用较薄HXLPE内衬以最大化股骨头尺寸在THA中是安全的,平均随访13年不导致翻修率或内衬失败增加。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Concerns remain that thinner highly crosslinked polyethylene (HXLPE) liners in modern total hip arthroplasty (THA) may lead to premature liner-related failures or revision. The aim of this study was to evaluate the effect of liner thickness on survival and revision rates of HXLPE in primary THA after more than 10 years. METHODS: We retrospectively identified 2,565 primary THAs using HXLPE with a mean follow-up of 13 years (range, 11 to 19). Patients were grouped for each mm of polyethylene thickness. Liner thickness varied from 4.9 to 12.7 mm, with one third measuring less than 6 mm. Primary outcomes were reoperation, all-cause revision, and liner-related revision. RESULTS: The reoperation rate was 7.3%, the all-cause revision rate was 5.6%, and the liner-related revision rate was 0.04%. There was no significant difference in all-cause revision when stratified by liner thickness (P = .286) and liner thickness was not associated with liner-related revision (n = 1). There was a statistically, but not clinically significant difference in mean liner thickness for the cohort that underwent reoperation (7.09 versus 6.89 mm, P = .01) and all-cause revision (7.16 versus 6.89 mm, P = .031). CONCLUSION: In our cohort, liner thickness was not associated with all-cause revision-free survival, and there was no clinically significant difference in liner thickness between those patients who did require a reoperation or all-cause revision, and those who did not. There was only 1 liner-related failure in the entire cohort. Our results indicate that using thinner HXLPE liners to maximize femoral head size in THA is a safe practice that does not lead to increased revision rates or liner failure at a mean 13-year follow-up.
引用
- Fransen BL, Howard LC, MacDonell T, et al. Highly Crosslinked Polyethylene Liner Thickness Does Not Influence Survival in Primary Total Hip Arthroplasty After Mean Follow-Up of 13 Years: A Study of 2,565 Hips With a Single Design Liner. J Arthroplasty. 2023. PMID: 36931361. doi:10.1016/j.arth.2023.03.026
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。