文献速递关节外科

全髋关节置换术中髋臼假体定位的患者特异性安全区:基于脊柱骨盆生物力学的数学测算

Patient-Specific Safe Zones for Acetabular Component Positioning in Total Hip Arthroplasty: Mathematically Accounting for Spinopelvic Biomechanics.
PubMed 文献 · J Arthroplasty · 2023-03-16

本研究从2457例连续初次全髋关节置换术患者中选取22例(0.88%)因不稳行翻修者,基于脊柱骨盆参数建立数学工具,将术前站立位髋臼目标转换为患者特异性术中安全区。翻修后假体位置与安全区的平均差异为倾斜角3.2±3.0°、前倾角5.3±2.7°,无再脱位;患者特异性安全区与髋脊柱分类推荐目标存在差异。

要点

  • 数学推导的患者特异性髋臼安全区经翻修后稳定髋关节验证,前倾角差异在5°以内、倾斜角差异在3°以内。
  • 患者特异性安全区与髋脊柱分类推荐目标的中位数及极值存在差异。
  • 翻修后22例患者随访4.6年(范围1至6.9年)无脱位发生。

核心结论

  • 数学推导的、考虑脊柱骨盆生物力学的患者特异性髋臼假体定位方法,通过使翻修后稳定髋关节的前倾角差异在5°以内、倾斜角差异在3°以内得到验证。

研究设计与样本

  • 从2457例连续初次全髋关节置换术患者中,选取22例(0.88%)因不稳行翻修者,测量术前脊柱骨盆参数及初次和翻修术后髋臼位置。
  • 使用数学证明开发开源工具,将术者选择的术前站立位髋臼目标转换为患者特异性术中安全区。
  • 比较翻修前后患者特异性安全区与实际假体位置的差异,并将髋脊柱分类目标与患者特异性安全区目标进行比较。

主要发现

  • 22例翻修患者中,随访4.6年(范围1至6.9年)无脱位发生。
  • 患者特异性安全区目标与翻修前髋臼假体位置的差异为倾斜角9.1±4.2°、前倾角13.3±6.7°;翻修后平均差异为倾斜角3.2±3.0°、前倾角5.3±2.7°。
  • 患者特异性安全区与髋脊柱分类推荐目标的中位数差异为倾斜角2.2±1.9°、前倾角5.6±3.7°,与极值差异为倾斜角3.0±2.3°、前倾角7.9±3.5°。

临床怎么用

  • 原文未据此给出推荐。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Despite a growing understanding of spinopelvic biomechanics in total hip arthroplasty (THA), there is no validated approach for executing patient-specific acetabular component positioning. The purpose of this study was to (1) validate quantitative, patient-specific acetabular "safe zone" component positioning from spinopelvic parameters and (2) characterize differences between quantitative patient-specific acetabular targets and qualitative hip-spine classification targets. METHODS: From 2,457 consecutive primary THA patients, 22 (0.88%) underwent revision for instability. Spinopelvic parameters were measured prior to index THA. Acetabular position was measured following index and revision arthroplasty. Using a mathematical proof, we developed an open-source tool translating a surgeon-selected, preoperative standing acetabular target to a patient-specific safe zone intraoperative acetabular target. Difference between the patient-specific safe zone and the actual component position was compared before and after revision. Hip-spine classification targets were compared to patient-specific safe zone targets. RESULTS: Of the 22 who underwent revision, none dislocated at follow-up (4.6 [range, 1 to 6.9]). Patient-specific safe zone targets differed from prerevision acetabular component position by 9.1 ± 4.2° inclination/13.3 ± 6.7° version; after revision, the mean difference was 3.2 ± 3.0° inclination/5.3 ± 2.7° version. Differences between patient-specific safe zones and the median and extremes of recommended hip-spine classification targets were 2.2 ± 1.9° inclination/5.6 ± 3.7° version and 3.0 ± 2.3° inclination/7.9 ± 3.5° version, respectively. CONCLUSION: A mathematically derived, patient-specific approach accommodating spinopelvic biomechanics for acetabular component positioning was validated by approximating revised, now-stable hips within 5° version and 3° inclination. These patient-specific safe zones augment the hip-spine classification with prescriptive quantitative targets for nuanced preoperative planning.

来源:J Arthroplasty,查看原文。版权归原作者所有。

引用

  1. Ramkumar PN, Pang M, Vigdorchik JM, et al. Patient-Specific Safe Zones for Acetabular Component Positioning in Total Hip Arthroplasty: Mathematically Accounting for Spinopelvic Biomechanics. J Arthroplasty. 2023. PMID: 36931359. doi:10.1016/j.arth.2023.03.025

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。