无骨水泥胫骨底板在关节负荷下于骨内发生轴向与矢状面旋转
研究纳入28例来自既往试验的受试者,使用带桩高孔隙率无骨水泥胫骨底板,从术后两周至一年进行仰卧位放射立体测量,一年时加做站立位检查。稳定与持续迁移底板的可诱导位移模式相似,前后轴位移最大,相邻虚拟点相关性提示负荷下底板发生轴向旋转,部分受试者出现前后倾斜。
要点
- 稳定与持续迁移的无骨水泥胫骨底板可诱导位移模式相似。
- 前后轴位移最大,其次为内外侧轴,负荷下底板发生轴向旋转(r²=0.689-0.977,P<.001)。
- 上下轴位移较小,相关性提示部分受试者出现前后倾斜(r²=0.178-0.226,P=.009-.023)。
核心结论
- 从仰卧位到站立位,该无骨水泥胫骨底板的主要位移模式为轴向旋转,部分受试者还出现前后倾斜。
研究设计与样本
- 研究纳入28例来自既往试验的受试者,评估带桩高孔隙率无骨水泥胫骨底板,从术后两周至一年进行仰卧位放射立体测量,一年时加做站立位放射立体测量。
主要发现
- 稳定与持续迁移胫骨底板的可诱导位移模式相似。
- 位移在前后轴最大,其次为内外侧轴。
- 前后轴与内外侧轴相邻虚拟点位移的相关性提示负荷下底板发生轴向旋转(r²=0.689-0.977,P<.001)。
- 上下轴位移较小,相关性提示负荷下底板发生前后倾斜(r²=0.178-0.226,P=.009-.023)。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: There has been a recent increase in the use of cementless fixation for primary total knee arthroplasty. While the early results of contemporary cementless implants are promising, understanding the behavior of cementless tibial baseplates under loading remains an ongoing interest. The objective of this study was to identify the pattern of displacement that occurred under loading for a single cementless tibial baseplate design at one year post operation for stable and continuously migrating implants. METHODS: There were 28 subjects from a previous trial of a pegged highly porous cementless tibial baseplate evaluated. Subjects underwent supine radiostereometric exams from two weeks through one year after surgery. At one year, subjects also underwent a standing radiostereometric exam. Fictive points on the tibial baseplate model were used to relate translations to anatomical locations. Migration over time was calculated to determine if subjects displayed stable or continuous migration. The magnitude of inducible displacement between the supine and standing exams was calculated. RESULTS: Inducible displacement patterns were similar between stable and continuously migrating tibial baseplates. Displacements were greatest in the anterior-posterior axis followed by the lateral-medial axis. Correlation of displacements between adjacent fictive points in these axes indicated an axial rotation of the baseplate occurred under loading (r2 = 0.689-0.977, P < .001). Less displacement occurred in the superior-inferior axis and correlations indicated an anterior-posterior tilt of the baseplate occurred under loading (r2 = 0.178-0.226, P = .009-.023). DISCUSSION: From supine to standing position the predominant pattern of displacement for this cementless tibial baseplate was axial rotation, with some subjects also displaying an anterior-posterior tilt.
引用
- Teeter MG, Broberg JS, Howard JL, et al. Axial and Sagittal Rotation of Cementless Tibial Baseplates Occurs in Bone Under Joint Loading. J Arthroplasty. 2023. PMID: 36893992. doi:10.1016/j.arth.2023.03.002
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。