胫骨矢状面的定义与无影像导航及机器人技术的悖论:一项尸体研究
该尸体研究对18例完全伸膝的尸体行CT扫描,比较无影像与影像技术定义胫骨矢状面的准确性、精确性和可重复性。结果发现,术前CT上定义胫骨矢状面具有最高的准确性、精确性和可重复性;无影像方法缺乏影像技术的精确性和可重复性。作者认为,在全膝关节置换术追求高准确性和精确性的背景下,用于量化植入物位置的参考框架也应具有高准确性和精确性。
要点
- 在18例完全伸膝的尸体中,影像技术定义胫骨矢状面的精确性优于无影像技术。
- 影像技术下胫骨内侧髁-胫骨外侧髁轴的组内和组间相关系数为0.90-0.98。
- 无影像方法缺乏影像技术的精确性和可重复性。
核心结论
- 术前CT上可最高准确、精确和可重复地定义胫骨矢状面。
- 无影像方法缺乏影像技术的精确性和可重复性。
- 在全膝关节置换术追求高准确性和精确性的背景下,用于量化植入物位置的参考框架也应具有高准确性和精确性。
研究设计与样本
- 对18例完全伸膝的尸体行CT扫描,获取手术经上髁轴及多个胫骨旋转参考。
- 经内侧髌旁入路后,在体内获取相同的解剖标志,并在水平面评估手术经上髁轴与胫骨旋转轴之间的角度。
- 证据等级为IV级,病例系列。
主要发现
- 最高准确性见于后交叉韧带-前交叉韧带(无影像,-1.48°,标准差13.64)、胫骨内侧髁-胫骨外侧髁(影像,1.72°,标准差4.24)、前交叉韧带-胫骨结节内侧缘(影像,-2.89°,标准差18.86)。
- 最高精确性见于影像技术:胫骨内侧髁-胫骨外侧髁(标准差4.24)、后交叉韧带-前交叉韧带(标准差5.86)、后交叉韧带-胫骨结节内侧三分之一(标准差7.10)。
- 影像技术下观察到优异的组内和组间相关系数:后交叉韧带-胫骨结节内侧缘、前内侧髁-前外侧髁、胫骨内侧髁-胫骨外侧髁(组内和组间相关系数0.90-0.98)。
关键数值与推荐
- 后交叉韧带-前交叉韧带(无影像)准确性为-1.48°,标准差13.64。
- 胫骨内侧髁-胫骨外侧髁(影像)准确性为1.72°,标准差4.24。
- 前交叉韧带-胫骨结节内侧缘(影像)准确性为-2.89°,标准差18.86。
- 影像技术下后交叉韧带-前交叉韧带精确性标准差为5.86,后交叉韧带-胫骨结节内侧三分之一精确性标准差为7.10。
临床怎么用
- 原文未据此给出推荐。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: The accuracy, precision, and repeatability by which the tibial sagittal plane can be found with imageless technology is currently unknown. The purpose of this study was to identify any differences between imageless and image-based technology to define the sagittal plane of the tibia. METHODS: A computed tomography (CT) was obtained of 18 cadavers with the knee fully extended. The surgical trans-epicondylar axis and several tibial rotation references were acquired on the CT scan. After a medial parapatellar approach, the same anatomical landmarks were acquired in vivo. In the horizontal plane, the angle between the surgical trans-epicondylar axis and the tibial rotational axes was assessed. RESULTS: Highest accuracy was found for posterior cruciate ligament (PCL)-anterior cruciate ligament (ACL, -1.48°, standard deviation [SD] 13.64; imageless), tibial medial condyle (TMC)-tibial lateral condyle (TLC, 1.72°, SD 4.24; image-based), the ACL-medial border of tibial tuberosity (MTT, -2.89°, SD 18.86; image-based). Highest precision was acquired with image-based technology: TMC-TLC (SD 4.24), PCL-ACL (SD 5.86), and PCL-medial third of tibial tuberosity (M3TT, SD 7.10). Excellent intraobserver and interobserver correlation coefficients were observed with image-based technology: PCL-MTT, anterior medial condyle (AMC)-anterior lateral condyle (ALC), and TMC-TLC (Intraobserver and interobserver correlation coefficients 0.90-0.98). CONCLUSION: The tibial sagittal plane could be defined with highest accuracy, precision, and repeatability on a preoperative CT. Imageless methodology lacked the precision and repeatability of image-based technology. With the current pursuit of high accuracy and precision in total knee arthroplasty, the reference frame used to quantify implant position should be highly accurate and precise as well. LEVEL OF EVIDENCE: IV, Case Series.
引用
- Vermue H, Stroobant L, Pringels L, et al. The Definition of the Tibial Sagittal Plane and the Paradox of Imageless Navigation and Robotics: A Cadaveric Study. J Arthroplasty. 2023. PMID: 36828051. doi:10.1016/j.arth.2023.02.039
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。