基于深度学习的标准化固定分区与锥形套评估用于翻修全膝关节置换术
本研究开发了一种深度学习流程,用于在翻修全膝关节置换术(rTKA)术后X线片上自动勾画固定分区并评估翻修锥形套放置。共纳入235例rTKA患者,按6:2:2随机分为训练、验证和测试集,采用U-Net分割流程在正位X线片上勾画分区并评估锥形套放置。测试队列中算法在98%的图像上定义了分区(8秒/图像),股骨和胫骨分区的Dice分割系数分别为0.89±0.08和0.91±0.08,锥形套识别和分区放置准确率在股骨分别为98%和96%,在胫骨分别为96%和89%。
要点
- 深度学习算法可在rTKA术后X线片上自动勾画固定分区并评估锥形套放置。
- 测试队列中算法在98%的图像上定义分区,每张图像耗时8秒。
- 股骨分区Dice系数0.89±0.08,胫骨分区0.91±0.08,全部分区0.90±0.05。
核心结论
- 开发了一种深度学习算法,可在rTKA术后X线片上以客观、标准化的方式自动勾画翻修分区和锥形套放置。
- 算法性能经训练有素的关节置换外科医生验证,显示其预测能力与关节置换外科医生实践中使用的相关解剖标志高度一致。
研究设计与样本
- 共纳入235例接受rTKA的患者,随机按6:2:2分为训练集、验证集和测试集。
- 开发了U-Net分割流程,用于在正位X线片上勾画rTKA固定分区并评估翻修锥形套放置。
- 算法性能与一名接受过关节置换专科培训的外科医生提供的真实标注进行比较,使用Dice分割系数和准确率指标。
主要发现
- 测试队列中,算法在98%的图像上使用解剖标志定义了分区,每张图像耗时8秒。
- 模型与外科医生之间的Dice分割系数:股骨分区为0.89±0.08(四分位距[IQR]:0.88-0.94),胫骨分区为0.91±0.08(IQR:0.91-0.95),全部分区为0.90±0.05(IQR:0.88-0.94)。
- 股骨锥形套识别准确率为98%,分区锥形套放置准确率为96%。
- 胫骨锥形套识别准确率为96%,分区锥形套放置准确率为89%。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Achieving adequate implant fixation is critical to optimize survivorship and postoperative outcomes after revision total knee arthroplasty (rTKA). Three anatomical zones (ie, epiphysis, metaphysis, and diaphysis) have been proposed to assess fixation, but are not well-defined. The purpose of the study was to develop a deep learning workflow capable of automatically delineating rTKA zones and cone placements in a standardized way on postoperative radiographs. METHODS: A total of 235 patients who underwent rTKA were randomly partitioned (6:2:2 training, validation, and testing split), and a U-Net segmentation workflow was developed to delineate rTKA fixation zones and assess revision cone placement on anteroposterior radiographs. Algorithm performance for zone delineation and cone placement were compared against ground truths from a fellowship-trained arthroplasty surgeon using the dice segmentation coefficient and accuracy metrics. RESULTS: On the testing cohort, the algorithm defined zones in 98% of images (8 seconds/image) using anatomical landmarks. The dice segmentation coefficient between the model and surgeon was 0.89 ± 0.08 (interquartile range [IQR]:0.88-0.94) for femoral zones, 0.91 ± 0.08 (IQR: 0.91-0.95) for tibial zones, and 0.90 ± 0.05 (IQR:0.88-0.94) for all zones. Cone identification and zonal cone placement accuracy were 98% and 96%, respectively, for the femur and 96% and 89%, respectively, for the tibia. CONCLUSION: A deep learning algorithm was developed to automatically delineate revision zones and cone placements on postoperative rTKA radiographs in an objective, standardized manner. The performance of the algorithm was validated against a trained surgeon, suggesting that the algorithm demonstrated excellent predictive capabilities in accordance with relevant anatomical landmarks used by arthroplasty surgeons in practice.
引用
- Jang SJ, Flevas DA, Kunze KN, et al. Standardized Fixation Zones and Cone Assessments for Revision Total Knee Arthroplasty Using Deep Learning. J Arthroplasty. 2023. PMID: 36791885. doi:10.1016/j.arth.2023.02.015
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。