文献速递关节外科创伤骨科

导航辅助全膝关节置换术后股骨钉道骨折的生物力学与有限元分析

Biomechanical and Finite-Element Analysis of Femoral Pin-Site Fractures Following Navigation-Assisted Total Knee Arthroplasty.
PubMed 文献 · J Bone Joint Surg Am · 2022-07-19

本研究以兔股骨进行生物力学测试(扭转、三点弯曲、轴向压缩)并结合有限元分析,探讨导航辅助全膝关节置换术中股骨钻孔位置对钉道骨折的影响。结果显示严重偏心钻孔显著降低股骨生物力学强度,尤其在扭转下;有限元分析显示严重偏心钻孔存在威胁性应力集中。以累积和法确定的安全偏心范围为相对股骨中心向前外侧50%半径至向后内侧70%半径。

要点

  • 严重偏心钻孔显著降低股骨生物力学强度,扭转测试中尤为明显。
  • 有限元分析显示严重偏心钻孔出现威胁性应力集中。
  • 安全偏心范围为相对股骨中心向前外侧50%半径至向后内侧70%半径。

核心结论

  • 严重偏心钻孔显著增加股骨钉道骨折风险,尤其在扭转应力下;股骨钻孔应在所确定的安全区内进行。

研究设计与样本

  • 采用兔股骨进行生物力学分析,评估钻孔偏心度与高度的影响,行扭转、三点弯曲和轴向压缩测试,测定失败强度、失败位移和刚度,记录并分析骨折类型及粉碎情况;同时采用有限元分析评估应力分布与变形,并应用累积和(CUSUM)法确定钻孔偏心的安全范围。

主要发现

  • 钻孔操作准确实施;生物力学测试证实严重偏心钻孔显著降低股骨生物力学强度,尤其在扭转下;有限元分析结果提供严重偏心钻孔存在威胁性应力集中的证据。

关键数值与推荐

  • 相对股骨中心的总体安全偏心范围为前外侧方向50%半径至后内侧方向70%半径之间。

临床怎么用

  • 作者结论认为股骨钻孔应在所确定的安全区内进行。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Femoral pin-site fracture is one of the most serious complications of navigation-assisted total knee arthroplasty (TKA). Its occurrence is associated with the loss of biomechanical strength caused by intraoperative femoral drilling. This study aimed to investigate the drilling location as a risk factor for pin-site fracture. METHODS: A biomechanical analysis using rabbit femora was performed to determine the effects of drilling eccentricity and height. Torsional, 3-point bending, and axial compression tests were performed to evaluate biomechanical parameters, including failure strength, failure displacement, and stiffness. Fracture type and the presence of comminution were noted and analyzed. Finite-element analysis (FEA) was utilized to assess the stress distribution and deformation. The cumulative sum (CUSUM) method was applied to define the safe range for drilling eccentricity. RESULTS: Drilling operations were accurately implemented. Biomechanical tests confirmed that severely eccentric drilling significantly reduced the biomechanical strength of the femur, especially in torsion. FEA results provided evidence of threatening stress concentration in severely eccentric drilling. The overall safe range of eccentricity relative to the center of the femur was found to be between 50% of the radius in the anterolateral direction and 70% of the radius in the posteromedial direction. CONCLUSIONS: Severely eccentric drilling significantly increased the risk of femoral pin-site fracture, especially under torsional stress. Femoral drilling should be performed in the safe zone that was identified.

来源:J Bone Joint Surg Am,查看原文。版权归原作者所有。

引用

  1. Sun H, Zhang H, Wang T, et al. Biomechanical and Finite-Element Analysis of Femoral Pin-Site Fractures Following Navigation-Assisted Total Knee Arthroplasty. J Bone Joint Surg Am. 2022. PMID: 36197326. doi:10.2106/JBJS.21.01496

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。