文献速递关节外科

机器人辅助全膝关节置换术在骨科专科医院中匹配传统手术效率的能力

The Ability of Robot-Assisted Total Knee Arthroplasty in Matching the Efficiency of Its Conventional Counterpart at an Orthopaedic Specialty Hospital.
PubMed 文献 · J Arthroplasty · 2022-08-06

该研究在骨科专科医院纳入2名有机器人经验的术者完成的148例全膝关节置换术(74例机器人辅助,74例传统),比较手术各阶段时间和周转时间。结果显示机器人辅助组建立、手术和撤除时间分别略长(3分钟、5分钟、3分钟),但周转时间无差异,平均总手术时间增加8分钟。作者认为这些小幅增加 compared to 传统组不太可能有临床意义,机器人技术能以对手术效率影响最小的方式融入该专科医院。

要点

  • 机器人辅助全膝关节置换术较传统手术平均增加8分钟手术时间。
  • 建立、手术和撤除时间分别略长3分钟、5分钟和3分钟,但周转时间无差异。
  • 术者A的学习曲线为6例机器人病例,术者B未显示学习曲线。

核心结论

  • 机器人辅助全膝关节置换术较传统全膝关节置换术平均增加8分钟手术时间,但建立、手术和撤除时间的小幅增加不太可能有临床意义。

研究设计与样本

  • 在骨科专科医院引入机器人辅助全膝关节置换术后,纳入2名有机器人经验的术者完成的148例手术(74例机器人辅助,74例传统),记录人口学、合并症和手术时间,采用累积和分析研究学习曲线。

主要发现

  • 机器人辅助组建立时间较传统组略长3分钟(范围12-45分钟),手术时间略长5分钟(范围33-118分钟),撤除时间略长3分钟(范围2-7分钟),但两组周转时间无差异。

关键数值与推荐

  • 术者A的学习曲线为6例机器人病例,术者B未显示学习曲线,周转时间无可识别的学习曲线。

临床怎么用

  • 原文未据此给出推荐。

局限性

  • 原文未报告局限性。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Robot-assisted total knee arthroplasty (RA-TKA) has become a popular technology. Studies have investigated the learning curve for surgeons incorporating RA-TKA into practice, but less is known regarding the change in operative efficiency when introducing RA-TKA into a facility. The purpose of this study was to investigate the effects of RA-TKA on operative and turnover time at an orthopaedic specialty hospital. METHODS: A total of 148 cases (74 RA-TKA and 74 conventional TKA [C-TKA]) performed by 2 surgeons with previous robotic experience were identified following the introduction of RA-TKA at our facility. Patient demographics, comorbidities, and operative times (ie, wheels-in to incision, incision to closure, closure to wheels-out, and turnover time) were recorded. Cumulative summation analyses were used to investigate learning curves of factors extraneous to surgeon proficiency with RA-TKA. RESULTS: While RA-TKA had a slightly longer set up (3 minutes; range, 12-45), surgical (5 minutes; range, 33-118), and breakdown time (3 minutes; range, 2-7), there was no difference in turnover time between the groups. The learning curve for surgeon A was 6 robotic cases, whereas surgeon B demonstrated no learning curve. There was no identifiable learning curve for turnover time. CONCLUSION: There was a mean of 8 minutes of increased time required to perform a RA-TKA compared to C-TKA. However, these small increases for the RA-TKA group for set-up, surgical, and breakdown times are not likely to be clinically relevant compared to the C-TKA. It appears that the RA-TKA technology was able to be incorporated into this specialty hospital with minimal changes to surgical efficiency.

来源:J Arthroplasty,查看原文。版权归原作者所有。

引用

  1. Meghpara MM, Goh GS, Magnuson JA, et al. The Ability of Robot-Assisted Total Knee Arthroplasty in Matching the Efficiency of Its Conventional Counterpart at an Orthopaedic Specialty Hospital. J Arthroplasty. 2022. PMID: 35940350. doi:10.1016/j.arth.2022.07.024

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。