文献速递关节外科

全髋关节置换术中40毫米股骨头与最小兼容髋臼杯配对:177例中期结果

Pairing 40-mm Femoral Heads With the Smallest Compatible Acetabular Components in Total Hip Arthroplasty: Mid-Term Outcomes in 177 Cases.
PubMed 文献 · J Arthroplasty · 2022-02-18

研究纳入2007至2018年间177例使用40毫米股骨头与≤56毫米髋臼杯及高交联聚乙烯内衬的初次全髋关节置换术,平均随访6年。10年脱位、任何翻修和任何再手术的累积发生率分别为3.6%、4.2%和6.8%,无内衬骨折或脱位。

要点

  • 40毫米股骨头配最小兼容髋臼杯未出现内衬骨折或脱位。
  • 10年脱位累积发生率为3.6%,任何翻修为4.2%,任何再手术为6.8%。
  • 平均线性股骨头穿透为0.01毫米/年,平均体积磨损率为50立方毫米/年。

核心结论

  • 在177例40毫米股骨头与最小兼容髋臼杯配对的初次全髋关节置换术中,无内衬骨折或脱位,10年脱位累积发生率适中,中期任何翻修和再手术累积发生率低。

研究设计与样本

  • 2007年至2018年间共纳入177例初次全髋关节置换术,使用40毫米股骨头、≤56毫米髋臼杯和高交联聚乙烯内衬;平均年龄61岁,56%为女性,平均体重指数32 kg/m2;采用竞争风险模型计算累积发生率;最少8年随访时评估骨溶解和股骨头穿透(n=16),平均随访6年;证据等级IV。

主要发现

  • 无内衬骨折或脱位病例。
  • 10年脱位累积发生率为3.6%,任何翻修累积发生率为4.2%,任何再手术累积发生率为6.8%。
  • 平均线性股骨头穿透为0.01毫米/年,平均体积磨损率为50立方毫米/年。
  • 1例全髋关节置换术在最近随访时显示稳定的、无症状的髋臼周围透亮线。

临床怎么用

  • 原文未据此给出推荐。

局限性

  • 最少8年随访时评估骨溶解和股骨头穿透的样本量仅为n=16。
  • 证据等级为IV。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

BACKGROUND: Contemporary total hip arthroplasty (THA) often employs larger femoral heads to optimize hip stability. However, pairing 40-mm femoral heads with the smallest compatible acetabular components poses a potential risk for implant failure. The purpose of this study is to evaluate the outcomes of primary THAs using 40-mm femoral heads and the smallest compatible acetabular components. METHODS: Between 2007 and 2018, 177 primary THAs involving 40-mm femoral heads and acetabular components ≤56 mm with highly cross-linked polyethylene liners were identified. Mean age was 61 years, 56% were females, and mean body mass index was 32 kg/m2. Cumulative incidences of dislocation, any revision, and any reoperation were determined utilizing a competing risk model. Osteolysis and femoral head penetration were assessed at minimum 8-year follow-up (n = 16). Mean follow-up was 6 years. RESULTS: There were no cases of liner fractures or dissociations. The 10-year cumulative incidences of dislocation, any revision, and any reoperation were 3.6%, 4.2%, and 6.8%, respectively. Mean linear femoral head penetration was 0.01 mm/y and mean volumetric wear rate was 50 mm3/y. One THA demonstrated stable, asymptomatic periacetabular radiolucent lines at most recent follow-up. CONCLUSION: In 177 primary THAs pairing 40-mm femoral heads with the smallest compatible acetabular components, there were no liner fractures or dissociations. The cumulative incidence of dislocation was modest at 10 years. The cumulative incidences of any revision and any reoperation were low at mid-term. LEVEL OF EVIDENCE: IV.

来源:J Arthroplasty,查看原文。版权归原作者所有。

引用

  1. Bukowski BR, Baker CE, Abdel MP, et al. Pairing 40-mm Femoral Heads With the Smallest Compatible Acetabular Components in Total Hip Arthroplasty: Mid-Term Outcomes in 177 Cases. J Arthroplasty. 2022. PMID: 35256235. doi:10.1016/j.arth.2022.01.090

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。