计算机导航全膝关节置换术中的胫骨后倾角:经踝矢状轴相比传统髓内轴低估后倾角
该回顾性研究纳入40例有术前CT的全膝关节置换术,重建胫腓骨三维几何,比较髓内轴与经踝矢状轴在矢状面的角度差异。经踝轴在39膝位于髓内轴后方,以其设定胫骨后倾角较髓内轴平均减少1.9°±1.3°,60%的膝减少0°至2°,25%减少2°至4°,13%减少超过4°。作者认为技术辅助以经踝轴设定后倾角时,矢状面X线测得的后倾角平均少1.9°,可能影响膝关节运动学。
要点
- 经踝矢状轴在39膝位于髓内轴后方,以其设定胫骨后倾角较髓内轴平均减少1.9°±1.3°。
- 后倾角减少0°至2°者24膝(60%),减少2°至4°者10膝(25%),减少超过4°者5膝(13%)。
- 作者认为技术辅助以经踝轴设定后倾角时,矢状面X线测得的后倾角平均少1.9°,可能影响膝关节运动学。
核心结论
- 以经踝轴设定胫骨后倾角的技术辅助全膝关节置换术,在矢状面X线测得的后倾角较髓内轴平均少1.9°,可能影响膝关节运动学。
研究设计与样本
- 回顾性识别40例有术前CT扫描的全膝关节置换术,重建胫腓骨三维几何,以最佳拟合圆柱确定髓内轴,按公认行业标准定义经踝轴,测量两轴在矢状面的角度差。
主要发现
- 经踝轴在39膝位于髓内轴后方。
- 以经踝轴设定胫骨后倾角较髓内轴平均减少1.9°±1.3°。
- 后倾角减少0°至2°者24膝(60%),减少2°至4°者10膝(25%),减少超过4°者5膝(13%)。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Tibial slope in total knee arthroplasty (TKA) impacts knee flexion, balance, and ligament strain. Implants were initially designed with tibial slope recommendations based on the intramedullary axis. However, technology-assisted TKA, such as robotics or navigation, determines slope from the ankle-knee axis connecting the center of the transmalleolar line to the proximal exit point of the tibial shaft axis. We sought to quantify the difference in tibial slope between the traditional intramedullary and transmalleolar sagittal tibial axes. METHODS: We retrospectively identified 40 TKAs with preoperative computed tomography scans. We reconstructed the 3-dimensional geometry of the tibia and fibula and determined the intramedullary axis as the best fit cylinder to the tibial shaft. We defined the transmalleolar axis according to accepted industry standards. We measured the angular difference between both axes in the sagittal plane. RESULTS: The transmalleolar axis was radiographically posterior to the intramedullary axis in 39 knees. Utilizing the transmalleolar axis to set posterior tibial slope would reduce the posterior tibial slope by a mean of 1.9° ± 1.3° compared to the intramedullary axis. Furthermore, the posterior slope would be reduced between 0° and 2° in 24 knees (60%), between 2° and 4° in 10 knees (25%), and more than 4° in 5 knees (13%). CONCLUSION: Tibial components implanted with technology assistance referencing the transmalleolar axis to set posterior slope will show an average of 1.9° less posterior slope when measured in sagittal plain radiographs, potentially concerning for knee kinematics.
引用
- Chalmers BP, Quevedo-Gonzalez F, Gausden EB, et al. Posterior Tibial Slope in Computer-Navigated Total Knee Arthroplasty: The Transmalleolar Sagittal Axis Underestimates Slope Compared to Traditional Intramedullary Axis. J Arthroplasty. 2022. PMID: 35240280. doi:10.1016/j.arth.2022.02.085
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。