胸腰骶支具设计特征对青少年特发性脊柱侧凸三维矫正的生物力学影响:一项综合多中心研究
该多中心数值研究由五个国家六个中心的专家团队为六例符合SRS标准的脊柱侧凸病例设计两种支具,共测试72个支具,用有限元模型模拟即刻支具内三维矫正与皮肤-支具压力,并按21项设计特征用方差分析和线性回归比较。结果显示顶椎水平压力点矫正主胸弯优于更尾侧位置,腹侧支撑使腰椎前凸变平,上胸带置于T10以上矫正主胸弯更好。
要点
- 顶椎水平压力点矫正主胸弯优于更尾侧位置。
- 腹侧支撑的支具使腰椎前凸变平。
- 上胸带置于T10以上矫正主胸弯优于更低位置。
核心结论
- 以系统化方法客观比较不同脊柱侧凸支具的矫正特征,测试参数偏倚和变异性最小,增进了对单项被动机制贡献于三维矫正的生物力学理解。
研究设计与样本
- 多中心数值研究,五个国家六个中心的专家临床团队(每中心一名矫形师和一名骨科医生)参与,为六例符合SRS标准的不同弯型脊柱侧凸病例按各自治疗方案设计两种支具,有限元模型模拟即刻支具内三维矫正和皮肤-支具压力。
主要发现
- 共测试72个支具,设计方法存在显著多样性。
- 顶椎水平压力点矫正主胸弯优于更尾侧位置。
- 腹侧支撑的支具使腰椎前凸变平。
- 侧方和腹侧皮肤-支具压力与胸腰段/腰段Cobb角和腰椎前凸变化相关(r=-0.53,r=-0.54)。
- 上胸带置于T10以上矫正主胸弯优于更低位置。
关键数值与推荐
- 所有支具按21项设计特征随机化并标记,特征源自国际脊柱侧凸矫形与康复治疗学会(SOSORT)提出的描述指标,包括压力点位置、推挤向量方向和矢状面设计。
- 各设计特征类别的模拟支具内三维矫正用方差分析和线性回归比较,显著性P≤0.05。
临床怎么用
- 原文未据此给出推荐。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
STUDY DESIGN: Multicenter numerical study. OBJECTIVE: To biomechanically analyze and compare various passive correction features of braces, designed by several centers with diverse practices, for three-dimensional (3D) correction of adolescent idiopathic scoliosis. SUMMARY OF BACKGROUND DATA: A wide variety of brace designs exist, but their biomechanical effectiveness is not clearly understood. Many studies have reported brace treatment correction potential with various degrees of control, making the objective comparison of correction mechanisms difficult. A Finite Element Model simulating the immediate in-brace corrective effects has been developed and allows to comprehensively assess the biomechanics of different brace designs. METHODS: Expert clinical teams (one orthotist and one orthopedist) from six centers in five countries participated in the study. For six scoliosis cases with different curve types respecting SRS criteria, the teams designed two braces according to their treatment protocol. Finite Element Model simulations were performed to compute immediate in-brace 3D correction and skin-to-brace pressures. All braces were randomized and labeled according to 21 design features derived from Society on Scoliosis Orthopaedic and Rehabilitation Treatment proposed descriptors, including positioning of pressure points, orientation of push vectors, and sagittal design. Simulated in brace 3D corrections were compared for each design feature class using ANOVAs and linear regressions (significance P ≤ 0.05). RESULTS: Seventy-two braces were tested, with significant variety in the design approaches. Pressure points at the apical vertebra level corrected the main thoracic curve better than more caudal locations. Braces with ventral support flattened the lumbar lordosis. Lateral and ventral skin-to-brace pressures were correlated with changes in thoracolumbar/lumbar Cobb and lumbar lordosis (r =- 0.53, r = - 0.54). Upper straps positioned above T10 corrected the main thoracic Cobb better than those placed lower. CONCLUSIONS: The corrective features of various scoliosis braces were objectively compared in a systematic approach with minimal biases and variability in test parameters, providing a better biomechanical understanding of individual passive mechanisms' contribution to 3D correction.
引用
- Guy A, Coulombe M, Labelle H, et al. Biomechanical Effects of Thoracolumbosacral Orthosis Design Features on 3D Correction in Adolescent Idiopathic Scoliosis: A Comprehensive Multicenter Study. Spine (Phila Pa 1976). 2022. PMID: 35275852. doi:10.1097/BRS.0000000000004353
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。