SLIM研究:通过降低全髋关节置换术器械质量实现经济、能源与废弃物节约
该随机对照研究将80例全髋关节置换术患者分为标准器械组与SLIM精简器械组,比较两组手术时间、出血量、并发症、每例成本、器械重量、废弃物总量、器械台准备时间及额外器械托盘需求。结果显示SLIM组每例节约成本408.19美元、能源7.16千瓦时、废弃物1.61千克、托盘6个(758千克/例),手术时间、出血量和并发症率组间无差异(P > .05),SLIM组准备时间显著更短(P < .05),额外器械开启率<5%。作者认为简约化全髋关节置换术可安全实施,每1000例可减少废弃物1610千克、节约能源7160千瓦时和成本408190美元。
要点
- SLIM精简器械组每例节约成本408.19美元、能源7.16千瓦时、废弃物1.61千克、托盘6个(758千克/例)。
- 两组手术时间、出血量和并发症率无显著差异(P > .05),SLIM组准备时间显著更短(P < .05)。
- SLIM组额外器械开启率<5%,每1000例全髋关节置换术可减少废弃物1610千克、节约7160千瓦时和408190美元。
核心结论
- 更简约的全髋关节置换术方法可安全实施,SLIM器械组高效且被辅助人员公开接受。
研究设计与样本
- 随机对照研究,80例患者随机分入标准器械组或SLIM器械组,比较两组手术时间、出血量、围手术期不良事件与并发症、每例成本、每例器械重量(千克)、每例废弃物总量(千克)、器械台准备时间及额外器械托盘需求次数与数量。
主要发现
- SLIM组每例节约成本408.19美元、能源7.16千瓦时、废弃物1.61千克、托盘6个(758千克/例)。
- 两组手术时间、出血量和并发症率无显著差异(P > .05)。
- SLIM组器械台准备时间显著更短(P < .05),额外器械开启率<5%。
- 每1000例全髋关节置换术可减少废弃物1610千克、节约能源7160千瓦时和成本408190美元。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Nearly 700,000 total hip arthroplasties (THAs) are annually performed in North America, costing the healthcare system >$15 billion and creating over 5 million tons of waste. This study aims to (1) assess satisfaction of current THA setup; (2) determine economic cost, energy cost, and waste cost of current setup and apply lean methodology to improve efficiency; and (3) design and test "Savings through Lowering of Instrumentation Mass (SLIM) setup" based on lean principles and its ability to be safely implemented into practice. METHODS: A Needs Assessment Survey was performed. After review and surgeon input, the "SLIM" set was designed, significantly reducing redundancy. Eighty patients were randomized to either Standard or SLIM setup. Operating room time, blood loss, perioperative adverse events and complications, cost/case, instrument weight (kg/case), total waste (kg/case), case setup time, and number of times and number of extra trays required were compared between groups. RESULTS: The SLIM setup was associated with the following savings: Cost = -$408.19/case; Energy = -7.16 kWh/case; Waste = -1.61 kg/case; Trays = -6 (758 kg/case). No differences in operating room time, blood loss, and complication rate were detected (P > .05) between groups. Setup time was significantly shorter with SLIM (P < .05) and extra instrumentation was opened in <5% of cases. CONCLUSION: A more "minimalist approach" to THA can be safely implemented. The SLIM setup is efficient and has been openly accepted by our allied staff. Such setup can lead to 1,610 kg reduction in waste, 7,160 kWh, and $408,190 in savings per 1,000 THAs performed.
引用
- Adamczyk AP, Kim PR, Horton I, et al. The SLIM Study: Economic, Energy, and Waste Savings Through Lowering of Instrumentation Mass in Total Hip Arthroplasty. J Arthroplasty. 2022. PMID: 35181450. doi:10.1016/j.arth.2022.02.010
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。