第二代高交联聚乙烯在全髋关节置换术中10年随访的低磨损表现
单中心评估130髋(110例)全髋关节置换术使用第二代序贯辐照退火高交联聚乙烯内衬,平均随访10年,线性磨损率0.02±0.03 mm/y,容积磨损率12.6±5.3 mm³/y,全因生存率92%,磨损相关生存率100%,平均改良Harris髋关节评分84分。年轻年龄与更高容积磨损相关,体重指数升高呈线性与容积磨损增高趋势。
要点
- 平均线性磨损率0.02±0.03 mm/y,平均容积磨损率12.6±5.3 mm³/y。
- 全因生存率92%,磨损相关生存率100%,10例需翻修。
- 年轻年龄与更高总容积及年容积磨损相关(P=0.01)。
核心结论
- 第二代高交联聚乙烯在平均10年随访中显示低线性与容积磨损率。
- 手术时年轻年龄和更高体重指数可能是影响长期磨损的重要患者特征。
- 结果提示该第二代高交联聚乙烯有潜力成为合适的长期全髋关节置换界面。
研究设计与样本
- 单中心评估130髋(110例)接受高交联聚乙烯髋臼内衬的全髋关节置换术患者。
- 平均年龄56岁(范围20-79岁),平均随访10年(范围8-15年)。
- 通过放射学分析量化线性(毫米/年)和容积(立方毫米/年)磨损率。
- 生存率通过全因和磨损相关翻修率评估;功能结局通过Short Form 12和改良Harris髋关节评分评估。
主要发现
- 平均线性磨损率为0.02±0.03 mm/y,平均容积磨损率为12.6±5.3 mm³/y。
- 年轻年龄与更高总容积和年容积磨损相关(P=0.01)。
- 体重指数增加与更高总线性(P≤0.09)、年线性(P≤0.09)、总容积(P≤0.07)和年容积磨损(P≤0.07)呈趋势。
- 10例患者需翻修,全因生存率92%,磨损相关生存率100%。
- 平均改良Harris髋关节评分为84分,平均Short Form 12评分为身体46分、心理55分。
关键数值与推荐
- 平均线性磨损率0.02±0.03 mm/y。
- 平均容积磨损率12.6±5.3 mm³/y。
- 全因生存率92%,磨损相关生存率100%。
- 平均改良Harris髋关节评分84分,Short Form 12身体评分46分、心理评分55分。
临床怎么用
- 原文未据此给出推荐。
局限性
- 原文未报告局限性。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
BACKGROUND: Characterizations and factors influencing longer term performance of second-generation sequentially irradiated and annealed highly cross-linked polyethylene (HXLPE) are lacking. We evaluated patients who underwent total hip arthroplasty with HXLPE at mean 10-year follow-up for (1) linear and volumetric wear rates, (2) patient and implant characteristics, (3) implant survivorships, and (4) functional scores. METHODS: We evaluated 130 hips (110 patients) that received HXLPE acetabular liners at a single center. The mean age was 56 years (range, 20-79 years), with a mean follow-up of 10 years (range, 8-15). Radiographic linear (millimeters/year) and volumetric (cubic millimeters/year) wear rates were quantified using radiographic analysis. Survivorship was assessed by all-cause and wear-related revision rates. Functional outcomes were assessed by Short Form 12 and modified Harris Hip Scores. RESULTS: The mean linear wear rate was 0.02 ± 0.03 mm/y, and the mean volumetric wear rate was 12.6 ± 5.3 mm3/y. Younger age had higher volumetric wear (total and yearly, P = .01). Increasing body mass index trended toward higher total and yearly linear (both, P ≤ .09) and volumetric wear (both, P ≤ .07). Ten patients required revisions, with an all-cause survivorship of 92% and a wear survivorship of 100%. The mean modified Harris Hip Scores was 84, and the mean Short Form 12 scores were 46 (physical) and 55 (mental). CONCLUSION: We observed low linear and volumetric wear rates for HXLPE at 10-year mean follow-up. Younger age and higher body mass index at the time of surgery may be important patient characteristics influencing long-term wear. These results illustrate the potential for this second-generation HXLPE to be an appropriate long-term total hip arthroplasty interface.
引用
- Sax OC, Douglas SJ, Chen Z, et al. Low Wear at 10-Year Follow-Up of a Second-Generation Highly Cross-Linked Polyethylene in Total Hip Arthroplasty. J Arthroplasty. 2022. PMID: 35210151. doi:10.1016/j.arth.2022.01.016
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。