利用角膜光学像差个体化表征胶原纤维弥散分布用于生物力学模型
研究提出一种利用眼压引起角膜光学像差变化来表征胶原纤维弥散分布的新方法,并通过有限元模拟和离体恒河猴角膜实验验证。三种假设分布均被成功表征,估计像差与实测数据接近,平均RMS差异分别为0.29、0.24和0.10微米;两只离体猴角膜的总体特征估计平均RMS差异为0.57和0.43微米。
要点
- 利用眼压所致角膜像差变化可个体化表征胶原纤维弥散分布。
- 有限元模拟中三种假设分布均成功表征,平均RMS差异0.29、0.24、0.10微米。
- 离体猴角膜实验总体特征估计平均RMS差异0.57和0.43微米。
核心结论
- 可构建含个体化胶原纤维弥散分布的角膜模型,以增进对角膜生物力学与光学行为的理解。
研究设计与样本
- 研究通过数值模拟和离体实验验证方法,有限元模型模拟三种假设胶原纤维弥散分布模式,并在三只离体恒河猴角膜上进行充气实验。
主要发现
- 理论研究中三种假设纤维弥散分布均被成功表征,估计光学像差与实测数据接近,平均RMS差异分别为0.29、0.24和0.10微米。
- 两只离体猴角膜的眼压所致光学像差变化总体特征被估计,平均RMS差异分别为0.57和0.43微米。
- 第三只角膜的纤维弥散表征可能受角膜水合影响,导致RMS差异增至0.8微米。
临床怎么用
- 该方法可用于建立个体化有限元模型,辅助理解角膜生物力学与光学行为。
局限性
- 离体实验样本量小,仅三只恒河猴角膜,且第三只角膜表征可能受水合影响。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
PURPOSE: The spatial distribution of collagen fibril dispersion has a significant impact on both corneal biomechanical and optical behaviors. The goal of this study was to demonstrate a novel method to characterize collagen fibril dispersion using intraocular pressure (IOP)-induced changes in corneal optical aberrations for individualized finite-element (FE) modeling. METHODS: The method was tested through both numerical simulations and ex vivo experiments. Inflation tests were simulated in FE models with three assumed patterns of collagen fibril dispersion and experimentally on three rhesus monkey corneas. Geometry, matrix stiffness, and the IOP-induced changes in wavefront aberrations were measured, and the collagen fibril dispersion was characterized. An individualized corneal model with customized collagen fibril dispersion was developed, and the estimated optical aberrations were compared with the measured data. RESULTS: For the theoretical investigations, three assumed distributions of fibril dispersion were all successfully characterized. The estimated optical aberrations closely matched the measured data, with average root-mean-square (RMS) differences of 0.29, 0.24, and 0.10 µm for the three patterns, respectively. The overall features of the IOP-induced changes in optical aberrations were estimated for two ex vivo monkey corneas, with average RMS differences of 0.57 and 0.43 µm. Characterization of the fibril dispersion in the third cornea might have been affected by corneal hydration, resulting in an increased RMS difference, 0.8 µm. CONCLUSIONS: A more advanced corneal model with individualized distribution of collagen fibril dispersion can be developed and used to improve our ability to understand both biomechanical and optical behaviors of the cornea.
引用
- Xu M, Ramirez-Garcia MA, Narang H, et al. Individualized Characterization of the Distribution of Collagen Fibril Dispersion Using Optical Aberrations of the Cornea for Biomechanical Models. Invest Ophthalmol Vis Sci. 2020. PMID: 32866268. doi:10.1167/iovs.61.10.54
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。