文献速递眼整形与眼眶

非接触面部形貌扫描、3D打印与硅胶铸造成形眶假体的自动化工作流程

Automated Noncontact Facial Topography Mapping, 3-Dimensional Printing, and Silicone Casting of Orbital Prosthesis.
PubMed 文献 · Am J Ophthalmol · 2020-07-22

这项概念验证性病例系列研究纳入3例因适配改变、褪色或材料降解而停用眼科技师制作的眶内容物剜除假体的患者,采用非接触面部形貌扫描、计算机辅助设计、3D打印与硅胶铸造成形定制眶假体。每例首件3D打印假体均获得良好对称性、颜色匹配与适配性,其中1例在患者不在场情况下制作了边缘-皮肤界面改善的第二件假体。该工作流程有潜力提供高效、标准化、可重复的眶内容物剜除假体,并克服全球范围内经济可及定制假体的主要障碍:可及性与成本。

要点

  • 非接触扫描结合镜像对侧与眶腔几何设计假体前后面,3D打印两件式模具后硅胶铸造。
  • 3例首件假体均获良好对称性、颜色匹配与适配性,1例可远程制作改进边缘的第二件。
  • 该流程有望降低定制眶假体的可及性与成本障碍。

核心结论

  • 非接触3D扫描、计算机辅助设计、3D打印与硅胶铸造成形眶假体的工作流程已开发并验证。
  • 该生产流程有潜力提供高效、标准化、可重复的眶内容物剜除假体,并克服全球范围内经济可及定制假体的主要障碍:可及性与成本。

研究设计与样本

  • 非比较性、干预性病例系列研究,单中心机构研究,纳入3例因适配改变、褪色或材料降解而停用眼科技师制作的眶内容物剜除假体的患者。
  • 干预为通过非接触面部形貌扫描获取眶内容物剜除腔与对侧眼周区域的数字表征,基于对侧镜像构建假体前表面、基于眶腔几何构建后表面轮廓,数字合并后设计并3D打印两件式模具,用比色法创建颜料共混物并入Shore 40硅胶弹性体以近似患者肤色。
  • 主要结局指标为假体对称性、肤色匹配、佩戴舒适度与外观。

主要发现

  • 每例使用该制作流程的3D打印眶假体首件均产生良好的对称性、颜色匹配与假体适配性。
  • 1例在患者不在场的情况下制作了重新塑形、假体边缘-皮肤界面改善的第二件假体。

关键数值与推荐

  • 假体前表面基于对侧镜像图像,后表面轮廓基于眶腔几何,前后面细节数字合并。
  • 采用比色法创建定制颜料共混物并入Shore 40硅胶弹性体以近似患者肤色。

临床怎么用

  • 该工作流程可用于制作定制眶内容物剜除假体,首件即可获得良好对称性、颜色匹配与适配性。
  • 支持在患者不在场时制作改进边缘-皮肤界面的第二件假体。
  • 该流程有潜力降低定制眶假体的可及性与成本障碍。

局限性

  • 研究为非比较性、干预性病例系列,仅纳入3例患者。
  • 研究为单中心机构研究。
  • 研究为概念验证性工作流程研究。

以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。

原文

PURPOSE: A proof-of-concept workflow study for the fabrication of custom orbital exenteration prostheses via automated noncontact scanning, 3D printing, and silicone casting. DESIGN: Noncomparative, interventional case series. METHODS: Setting: Single-center institutional study. StudyPopulation: Three patients who have discontinued wearing of the ocularist-made exenteration prosthesis due to altered fit, discoloration, or material degradation. InterventionProcedure: A digital representation of the exenteration socket and contralateral periocular region was captured through noncontact facial topography mapping. Digital construction of the anterior prosthesis surface was based on the mirrored image of the contralateral side, and the posterior surface contour was based on orbital cavity geometry. The anterior and posterior surface details were digitally merged. A 2-piece mold was designed and produced in a 3D printer. Colorimetry was used to create a custom blend of pigments for incorporation into the Shore 40 silicone elastomer to generate a prosthesis that approximates the patient's skin tone. MainOutcomeMeasures: Prosthesis symmetry, skin tone match, comfort of wear, and appearance. RESULTS: The first copy of every 3D-printed orbital prosthesis using this fabrication workflow produced good symmetry, color match, and prosthesis fit. In one case, the recontoured second copy with improved prosthesis edge-to-skin interface was made without the patient present. CONCLUSION: A noncontact 3D scanning, computer-aided design, 3D printing, and silicone casting for fabrication of orbital prosthesis was developed and validated. This production workflow has the potential to provide an efficient, standardized, reproducible exenteration prosthesis and to overcome the principal barriers to an affordable custom prosthesis worldwide: access and cost.

来源:Am J Ophthalmol,查看原文。版权归原作者所有。

引用

  1. Weisson EH, Fittipaldi M, Concepcion CA, et al. Automated Noncontact Facial Topography Mapping, 3-Dimensional Printing, and Silicone Casting of Orbital Prosthesis. Am J Ophthalmol. 2020. PMID: 32707202. doi:10.1016/j.ajo.2020.06.032

供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。