自适应时间专家混合模型从眼反应分析仪波形预测刚度指标并识别圆锥角膜
本研究开发了自适应时间专家混合(AT-MoE)机器学习模型,从眼反应分析仪(ORA)波形中提取弹性刚度估计。模型在包含对照组、圆锥角膜、糖尿病视网膜病变、原发性开角型青光眼和高眼压等6个队列的开发数据集中训练,并在独立验证数据集上验证。AT-MoE在预测刚度指标上优于基线LSTM,并在独立验证集中识别圆锥角膜的AUROC达0.9512,性能与断层成像检测方法相似。
要点
- AT-MoE模型从ORA波形预测Corvis ST刚度参数,预测误差较基线LSTM降低。
- 独立验证集中圆锥角膜识别AUROC=0.9512,与断层成像检测方法性能相似。
- 该方法有望扩展ORA设备在临床生物力学评估中的用途。
核心结论
- AT-MoE模型为从ORA波形中提取弹性刚度估计提供了新颖且准确的框架。
- 与传统机器学习模型相比,AT-MoE模型提高了圆锥角膜的诊断能力。
研究设计与样本
- 前瞻性观察性队列研究,使用开发数据集进行模型训练和测试,并用独立验证数据集验证。
- 开发数据集前瞻性纳入6个队列:对照组、圆锥角膜、伴视网膜病变糖尿病、不伴视网膜病变糖尿病、原发性开角型青光眼和高眼压。
- 独立验证数据集包含健康参与者和圆锥角膜患者两个队列。
- 开发数据集使用ORA和Corvis ST设备收集眼压和生物力学数据。
- AT-MoE模型结合长短期记忆(LSTM)网络与动态专家选择,使用ORA波形参数和原始信号预测Corvis ST的刚度参数(SP-A1、SP-HC、SSI)。
主要发现
- AT-MoE模型在使用ORA输入数据预测眼部刚度估计时显著优于基线LSTM,降低了预测误差。
- AT-MoE模型在独立验证数据集中提高了圆锥角膜检测性能,AUROC=0.9512。
- 该AUROC与断层成像检测方法的性能相似。
关键数值与推荐
- 主要结局指标为预测的ORA刚度估计,包括角膜刚度估计、巩膜刚度估计和变形刚度估计。
- 刚度参数包括SP-A1代表角膜刚度、SP-HC代表巩膜刚度和SSI代表变形刚度。
- 圆锥角膜分类性能以受试者工作特征曲线下面积(AUROC)评估,独立验证集AUROC=0.9512。
临床怎么用
- AT-MoE模型可基于ORA波形参数及 appla nation 和压力信号输入,用于圆锥角膜与健康眼的分类。
- 该方法有潜力扩展ORA设备在临床环境中进行生物力学评估的用途。
以上解读依据论文摘要(全文未开放获取或许可不允许翻译转载)。
原文
PURPOSE: To develop a machine learning-based modeling approach for extracting elastic stiffness estimates from Ocular Response Analyzer (ORA) waveforms. DESIGN: Prospective observational cohort study with model training and testing using a development dataset and validation with an independent validation dataset. METHODS: Participants were prospectively enrolled into 6 cohorts for the development dataset, including control subjects, individuals diagnosed with keratoconus, diabetes mellitus with retinopathy and without retinopathy, primary open-angle glaucoma, and ocular hypertension. An independent validation dataset comprised data for two cohorts, including healthy participants and individuals diagnosed with keratoconus. Intraocular pressure and biomechanical data were collected using the ORA and Corvis ST devices for the development dataset. An Adaptive Temporal Mixture of Experts (AT-MoE) model, incorporating long short-term memory (LSTM) networks with dynamic expert selection, was trained using ORA waveform parameters and raw signals to predict stiffness parameters (SP) from Corvis ST, including SP-A1 representing corneal stiffness, SP-HC representing scleral stiffness, and SSI representing deformation stiffness. Predicted ORA stiffness estimates were independently validated with a separate dataset of keratoconus and healthy eyes. The ORA waveform parameters, as well as applanation and pressure signals, were used as input to the machine learning models to classify eyes with keratoconus versus healthy eyes, which was evaluated with the area under the receiver operating characteristic (AUROC) curves. The primary outcome measures were the predicted ORA stiffness estimates, including corneal stiffness estimate, scleral stiffness estimate, and deformation stiffness estimate. RESULTS: The AT-MoE model significantly outperformed the baseline LSTM in predicting ocular stiffness estimates using ORA input data with reduction of prediction error. The AT-MoE model also resulted in improvement of keratoconus detection performance in the independent validation dataset with AUROC=0.9512, which is similar to performance of tomographic detection approaches. CONCLUSIONS: The AT-MoE model provides a novel and accurate framework for deriving elastic stiffness estimates from ORA waveforms, and offers improved diagnostic capability for keratoconus compared to traditional machine learning models. This method has the potential to expand the utility of the ORA device for biomechanical assessment in clinical settings.
引用
- Zhang Y, Padhee S, Yuhas PT, et al. Adaptive Temporal Mixture of Experts for Predicting Stiffness Metrics From the Ocular Response Analyzer and Identifying Keratoconus. Am J Ophthalmol. 2026. PMID: 41763592. doi:10.1016/j.ajo.2026.02.028
供执业医师工作参考,不替代临床判断;数值与分级以指南原文为准。